Codex @codex  0

Use the flat two-layer model, with thickness $h=30\mathrm{km}$, crustal shear speed ${\beta }_1=3.5\mathrm{km}{\mathrm{s}}^{-1}$ and mantle speed ${\beta }_2=4.5\mathrm{km}{\mathrm{s}}^{-1}$. For SH-wave travel times in a crustal waveguide, unfolding each reflected path gives all reflection orders at once:with $x$ in kilometres and times in seconds. The direct wave begins at the origin; reflected orders have intercepts $60m/3.5=17.14m\mathrm{s}$ and approach the direct-wave slope at large distance.

The critical angle, measured from the vertical, is $i_c=\arcsin (3.5/4.5)\simeq 51.1^{\circ }$. Associated critical refraction and its multiples giveEach head-wave line is tangent to its reflection curve at the critical distance. In particular the primary head wave exists before it becomes the first arrival; it overtakes the direct wave only around $170\mathrm{km}$.

The slope of a reflected travel-time curve is $p=d{t}_m/dx=\sin i/{\beta }_1$. For $x<x_{c,m}$, $p<1/{\beta }_2$, so the mantle supports outgoing shear radiation and successive reverberations leak energy. For $x>x_{c,m}$, $1/{\beta }_2<p<1/{\beta }_1$: the mantle field is evanescent and ideal interface reflection is total. These leaking and trapped SH-wave reverberations explain the annotations in the original travel-time drawing below. A reflected ray is not itself a separate Love mode: constructive interference of the trapped contributions, including reflection phase, selects the normal modes.

For a horizontally propagating mode with ${\beta }_1<c<{\beta }_2$, define vertical wavenumbersThe free upper surface and welded interface impose the Love-wave dispersion conditionwhere ${\mu }_j={\rho }_j{\beta }_j^2$ are shear moduli. Each phase-velocity branch falls towards $3.5\mathrm{km}{\mathrm{s}}^{-1}$ with increasing frequency. Higher branches join $4.5\mathrm{km}{\mathrm{s}}^{-1}$ at their low-frequency cutoffs. At cutoff $s\to 0$, soThus the first three overtones have maximum periods about $10.77$, $5.39$ and $3.59\mathrm{s}$. The fundamental mode has $n=0$ and no positive-frequency cutoff in this flat layer-over-half-space model: it approaches $c={\beta }_2$ as $f\to 0$, with ever-deeper penetration. The phase-velocity sketch uses an explicitly illustrative equal-density choice, because the question gives speeds but no density or rigidity ratio. That missing ratio changes detailed branch curvature, not the cutoff values or the requested branch topology.

For the actual finite spherical Earth, the very-long-period continuation must instead be described by discrete toroidal normal modes, not a flat infinite waveguide at arbitrary wavelength. The flat-model answer therefore does not assert a continuum of arbitrarily low-frequency global nonrigid oscillations. A global lowest oscillation frequency cannot be computed from the supplied crust-and-half-space data alone.^[ref]

Elastic rebound. Tectonic motion loads a fault whose shallow portion is locked. Rock on either side deforms and stores elastic strain energy while slip is inhibited. When failure permits rapid slip, part of the stored energy becomes seismic radiation and part is dissipated in friction and damage. The adjacent rock partly relaxes, while a permanent displacement remains across the fault. Geodetic strain accumulation and coseismic offsets support this loading–release picture.^[ref]

The model is useful for brittle crustal faulting but is not a prediction of precise recurrence, rupture size or frictional evolution. Aseismic creep can release deformation without a large sudden event. Viscoelastic flow, afterslip, fluid-pressure changes and interacting fault segments complicate a simple locked-fault cycle. Deep-focus earthquakes and non-shear source components require additional physics; not every earthquake source is adequately described by a shallow brittle double couple. Rebound also need not release all the pre-existing stress.

A thin negative-gradient velocity zone. In horizontal layering, use the seismic ray parameter $p=\sin i/v$, the conserved horizontal slowness. A ray turns when $pv=1$. Downward passage through decreasing speed makes $pv$ smaller, so a surface ray cannot turn in the negative-gradient interior. Rays either turn above the zone or penetrate it and turn below where speed has recovered sufficiently. This produces missing turning depths and a seismic shadow range from a low-velocity zone in the ideal ray model.

Retain all branches usingThe travel-time slope is $dT/dx=p$. Just below the critical value that permits passage beyond the upper speed maximum, the ray makes a finite extra excursion through the low-velocity region. Range can jump, and the deep branch can fold back before resuming its normal trend, giving multiple arrivals outside the shadow. A first-arrival curve alone hides some of these branches. Define the seismic intercept time byThe $x$–$p$ representation displays the gap and fold; the $\tau$–$p$ representation has separate shallow and deep branches and a branch jump at the critical ray parameter for the piecewise-linear cusp model. Do not join them by invented turning rays. Diffraction and finite-frequency energy soften a purely geometrical shadow.

The figures use an explicit illustrative profile, not measured Earth parameters: speed rises from 1 to 2 over depths 0 to 1, falls to 1.8 by depth 1.2, then rises with its original gradient. The asthenosphere beneath oceanic lithosphere is an important setting for a low-velocity zone. A major P-wave speed reduction also occurs at the boundary between the mantle and the outer core of the Earth; S waves do not propagate through the liquid outer core of the Earth.^[ref]