Finesse ($\mathcal{F}=\Delta {\nu }_{\mathrm{FSR}}/\Delta {\nu }_{\mathrm{FWHM}}$)

The finesse of a Fabry–Pérot interferometer is its free spectral range divided by a transmission peak's full width at half maximum. Large finesse means a narrow accepted frequency interval compared with the spacing between repeated orders. Here half maximum means $T=1/2$ of the ideal unit peak, with zero detector background subtracted; it does not mean halfway between the transmission minimum and maximum.

Write $A=4R/(1-R{)}^2$ for the coefficient multiplying ${\sin }^2(\delta /2)$ in Fabry–Pérot transmission from multiple reflections. This coefficient is sometimes called the coefficient of finesse; it is not the finesse $\mathcal{F}$. About a resonance $\delta =2\pi m$, put $ϵ=\delta -2\pi m$. Solving $T=1/2$ givesand, since one free spectral range advances the wave phase by $2\pi$,These are exact for the ideal nondispersive model with constant $R$ and linear frequency dependence of $\delta$. The inverse sine requires $(1-R)/(2\sqrt{R})\le 1$, or $R\ge 3-2\sqrt{2}\simeq 0.171573$. At equality, neighbouring peaks merely touch half maximum at their shared minima: the nominal width is one full free spectral range and $\mathcal{F}=1$. Isolated half-maximum peaks require the strict inequality. Below this threshold the transmission never falls to $1/2$, so this peak-width definition supplies no finesse; at $R=0$ the transmission is flat.

For large reflectivity, the small-angle approximation $\arcsin x\simeq x$ givesThis is a high-reflectivity approximation, not an identity for every $R$. The original dimensionless examples below have exact full width at half maximum values obtained from the inverse sine formula.

The beauty of the narrowing is visible directly in the geometric series: large $R$ preserves contributions from many round trips, so a small phase difference accumulates across many terms and spoils their addition. For the stipulated $10\mathrm{mm}$ vacuum gap, $R=0.95$ gives an ideal full width at half maximum of about $244.792\mathrm{MHz}$. This instrumental width is not a measured spectral line width. A real scan also depends on the source profile, accepted angles, mirror shape, alignment, and scan stability. The University of Washington handout separately discusses mirror-reflectivity, mirror-flatness, and detector-pinhole contributions; increasing $R$ alone cannot remove the others.^[ref]