Series RC impedance ($Z=R-\mathrm{i}/(\omega C)$)

Consider a stipulated series circuit containing an ideal resistor of electrical resistance $R=100\Omega$ and an ideal capacitor of capacitance $C=1\mu \mathrm{F}$. The same electric current passes through both. Their terminal electric potential differences add by Kirchhoff's voltage law, soA quick derivation uses $i=Cd{v}_C/dt$: taking the derivative of the complex exponential multiplies the capacitor voltage phasor by $\mathrm{i}\omega$, hence ${\hat{V}}_C=\hat{I}/(\mathrm{i}\omega C)$. Dimensionally, $1/(\omega C)$ has units $s/F=V/A=\Omega$, matching $R$.

At frequency $f=1000\mathrm{Hz}$, the angular frequency is $\omega =2\pi f$. The signed capacitive electrical reactance, modulus and complex argument of the total electrical impedance areApply $V_{\mathrm{rms}}=1.00\mathrm{V}$ across the complete series circuit. Its root mean square electric current isWith voltage as the zero-phase reference, the current phasor has complex argument $+57.858092^{\circ }$: electric current leads. The phasor drops have moduli $V_{R,\mathrm{rms}}=0.532018\mathrm{V}$ and $V_{C,\mathrm{rms}}=0.846733\mathrm{V}$; these add as complex numbers, not as positive magnitudes. Their squared magnitudes sum to $(1.00\mathrm{V}{)}^2$.

The mean absorbed power uses the root mean square values:The ideal capacitor has zero cycle-averaged absorbed power; all the mean absorbed power becomes Joule heating in the resistor.^[ref] To see why the phase factor appears, average $p(t)=v(t)i(t)$ over a full cycle with $v(t)=\sqrt{2}{V}_{\mathrm{rms}}\cos \omega t$ and $i(t)=\sqrt{2}{I}_{\mathrm{rms}}\cos (\omega t-\varphi )$. The cosine addition formula reduces the average to $V_{\mathrm{rms}}{I}_{\mathrm{rms}}\cos \varphi$; the term at $2\omega$ averages to zero. Independently, $p_C=d(C{v}_C^2/2)/dt$, and the capacitor energy returns to its starting value after each cycle.

At fixed applied $V_{\mathrm{rms}}$, the limit $\omega \to 0^{+}$ gives $|Z|\to \infty$, $\varphi \to -\pi /2$ and $I_{\mathrm{rms}}\to 0$: the ideal capacitor blocks steady electric current. The limit $\omega \to \infty$ gives $Z\to R$, $\varphi \to 0$ and $I_{\mathrm{rms}}\to V_{\mathrm{rms}}/R$. These are limits of the ideal lumped electrical circuit; unwanted lead inductance and component losses can invalidate that model at high frequency. At $\omega RC=1$, the equal legs of the impedance right triangle give $|Z|=\sqrt{2}R$ and $\varphi =-\pi /4$ without numerical evaluation. Measuring both the magnitude and the sign of the phase difference distinguishes this capacitor response from an equally large positive electrical reactance.