 Gas thermometer

A gas thermometer infers temperature from the equation of state of a confined gas. The constant-volume version measures pressure; the constant-pressure version measures volume. For an ideal gas,Here $N$ is particle number, $n$ is amount of substance, $k_B$ is the Boltzmann constant, and $R$ is the molar gas constant. The reference and test states must be internally equilibrated, and $T_0$ must be known on the absolute thermodynamic temperature scale. A pressure ratio cancels the unknown gas inventory and bulb size in the ideal constant-volume limit. This cancellation is the method's appeal: a mechanical measurement transfers an absolute temperature scale between different materials. The Maxwell speed distribution and ideal gas pressure from wall collisions explain the microscopic origin of the response. ^[ref]

For an original ideal-model calculation, choose $T_0=300\mathrm{K}$, $P_0=120\mathrm{kPa}$ and $P=160\mathrm{kPa}$. Then $T=400\mathrm{K}$. These are stipulated values, not observations. Both pressures must be absolute, referred to vacuum. If the surrounding atmospheric pressure were $100\mathrm{kPa}$, the corresponding gauge pressures would be $20$ and $60\mathrm{kPa}$; their ratio is three, which would incorrectly predict $900\mathrm{K}$. A pressure difference from the atmosphere cannot be substituted into the ideal gas law.

A motivating calibration experiment. Schooley's account of the NBS/NIST work describes a helium-filled metal bulb, a capillary, a capacitance diaphragm gauge, and a mercury pressure standard. Circulating bath liquid passed the bulb assembly and platinum resistance thermometers. The resistance probes checked the surrounding temperature; gas pressure supplied the independent thermodynamic comparison. In an early series, workers filled the cleaned bulb with purified helium at the highest test temperature, checked pressure over three hours, then measured at lower temperatures and near a reference at $0{}^{\circ }\mathrm{C}$. Six filling pressures allowed extrapolation toward zero pressure. ^[ref]

To turn this principle into a readable measurement protocol, use the following controls. These steps are a proposed teaching interpretation of the cited apparatus, rather than additional reported NBS observations:

The corresponding NBS apparatus used a protective case with an outer helium layer held close to the bulb pressure, reducing pressure deformation while aiding thermal contact. Thermal expansion was measured on bulb material. Gas in the capillary remained partly outside the hot region, requiring a measured tube temperature profile and geometry. Pure working gas also mattered: contaminants that sorb on surfaces can change the freely circulating inventory. These are physical effects to measure or bound, rather than scatter that disappears by averaging. ^[ref]

For illustration, neglect connecting-tube gas and describe a uniform bulb with a dilute virial expansion in particle number density ${\rho }_N=N/V$:Here $Z=PV/(N{k}_{B}T)$ and $B_2$ is the second virial coefficient in the particle-density convention; a molar-density convention rescales the coefficient. The second relation follows exactly from the definition of $Z$ for the same $N$, and shows the signs of the corrections. If the bulb expands by $0.1\%$ and $Z=1$ at both states, the toy pressure ratio above gives $400.4\mathrm{K}$, rather than $400\mathrm{K}$. Improved expansion and helium nonideality models really changed the temperatures inferred from the 1989 NIST data: Harvey's 2023 reanalysis found expansion updates of roughly $1$–$3\mathrm{mK}$ and nonideality updates of roughly $-0.1$ to $-0.5\mathrm{mK}$. Those are reported corrections to historical results, not the much larger illustrative correction just calculated. ^[ref]

With equal corrected bulb volumes, negligible or corrected connecting-tube gas, fixed reference and test temperatures, and a dilute classical single gas phase,Repeat the reference/test comparison for several sealed fills, reducing $N$ between comparisons but keeping it fixed within each pair. The extrapolation varies density at fixed endpoint temperatures; it does not cool one fill toward zero temperature. Real gases have different finite-density corrections but share the classical ideal gas intercept under these assumptions. The limit does not remove leaks, bulb expansion, gauge offsets, or the gas thermometer dead-space correction. At very low pressures, thermal transpiration can make remote sensor and bulb pressures differ through a nonisothermal capillary; this must be corrected too. The NBS work measured this pressure correction using a separate comparison of narrow and wider tubes. ^[ref]

At $x=1$, the toy models give $T_{\mathrm{app}}=407.92\mathrm{K}$ and $388.12\mathrm{K}$, respectively, although their imposed true test temperature is the same. Their zero-density intercept is the reusable quantity. Measuring several low-density points permits a fit and a check for curvature; asserting a straight line from one finite-density point supplies neither. A practical fit must balance nonideality against increasing relative pressure error and the capillary corrections, and keep its extrapolation uncertainty.

A gas thermometer is a type of thermometer that measures temperature based on the change in volume or pressure of a gas as its temperature changes. It operates on the principle that gases expand when heated and contract when cooled. Gas thermometers can be quite accurate and are often used in scientific research and industrial applications. ### Key Features of Gas Thermometers: 1. **Working Principle**: The gas thermometer typically contains a gas in a sealed container.