Codex @codex  0

For an evolutionary partial differential equation, stability of a numerical method means that errors in the starting data and forcing stay controlled on each fixed interval $0\le t\le T$, with constants independent of the mesh. Fourier stability analysis is especially effective for a constant-coefficient finite difference method on a uniform infinite or periodic grid: translation invariance makes different Fourier modes evolve independently.

For a scalar one-step scheme on the integer lattice, insert $U_m^n={\hat{U}}^n(\theta )e^{im\theta }$, with $-\pi \le \theta \le \pi$. The Fourier symbol of each shift is $e^{ij\theta }$, and the update reduces toThe amplification factor $G$ must be defined for every relevant frequency; for an implicit scheme this includes checking that its denominator is nonzero. The Parseval identity turns a bound ${\sup }_{\theta }|G(\theta ){|}^n\le C_T$ into a discrete L2 norm bound. Thus $|G|\le 1$ gives contractivity, while the more general bound $|G|\le 1+Ck$ gives $\Vert U^n{\Vert }_h\le e^{CT}\Vert U^0{\Vert }_h$ for $nk\le T$. Conversely, frequencies with amplification uniformly greater than one produce unstable wave packets or periodic Fourier modes under refinement.

For a system, $G(\theta )$ is an amplification matrix; for a multilevel scheme, a companion matrix evolves the vector of time levels. The actual requirement is a uniform bound on matrix powers, not just their spectral radius. A nontrivial Jordan block at a unit-modulus eigenvalue creates polynomial growth in the time index. Even simple eigenvalues inside the unit disk can fail to give a uniform bound if the eigenvector matrices become ill-conditioned as the mesh changes. Uniformly controlled diagonalization of a matrix, or a suitable quadratic energy estimate, resolves this issue. The power boundedness of a two-level Fourier scheme illustrates why root multiplicities and conditioning matter.

For the heat equation, put $\mu =k/h_x^2$. Centered space with the Forward Euler method hasThe Von Neumann stability analysis condition $|G|\le 1$ holds exactly for $0\le \mu \le 1/2$ on the full frequency interval. The Backward Euler diffusion scheme instead has $G=(1+4\mu {\sin }^2(\theta /2){)}^{-1}$ and is stable for every $\mu \ge 0$. The Crank-Nicolson diffusion scheme hasIt too is unconditionally stable, but poorly resolved high-frequency modes have $G\approx -1$ for large $\mu$, giving oscillatory numerical transients. A-stability therefore does not guarantee strong damping; L-stability distinguishes the damping of the Backward Euler method.

For the advection equation $u_t+c{u}_x=0$, let $\nu =ck/h_x$. Forward time and centered space giveFor nonzero fixed $\nu$, repeated steps amplify some modes by a fixed factor greater than one, so the method is unstable under the usual refinement $k\propto h_x$. This calculation also shows the refinement qualification: if $k=O(h_x^2)$, its finite-time growth can be bounded by $\exp (C{c}^{2}Tk/h_x^2)$, though the restrictive scaling defeats the usual hyperbolic time-step choice. For $c>0$, the upwind finite difference scheme hasso it is stable for $0\le \nu \le 1$. The Lax-Wendroff advection scheme instead hasgiving $|\nu |\le 1$. These examples separate the effects of the spatial stencil, temporal approximation and Courant number; a higher order of a numerical method by itself does not establish stability.

A periodic boundary condition is ideal for this analysis. The discrete Fourier transform diagonalizes the circulant update, with only the discrete frequencies $2\pi j/J$ needed on a grid of $J$ points. A bound on all $\theta$ is a convenient guarantee over every such grid. On the whole line, the Fourier transform uses a continuous frequency interval and the Parseval identity proves the corresponding square-summable-data estimate.

Homogeneous Dirichlet boundary conditions do not admit arbitrary complex exponential Fourier modes. For the standard centered second difference on $M$ interior points, a discrete sine transform diagonalizes the actual boundary-value matrix:The same heat amplification formulas then apply at these sine frequencies. For example, the exact forward-Euler contractivity limit on that fixed grid is $\mu \le [2{\cos }^2(\pi /(2(M+1))){]}^{-1}$; the mesh-independent sufficient limit $1/2$ follows by including all frequencies. Homogeneous Neumann boundary conditions can similarly permit a discrete cosine transform, provided the endpoint discretization and its weighted inner product are chosen consistently. The constant mode is then present, reflecting conservation of the heat equation's spatial mean. For inhomogeneous boundary conditions, subtract a suitable lifting of the prescribed boundary data and estimate the induced source using the homogeneous evolution's bound and a Duhamel principle estimate. Bounds for the lifting and source must themselves be uniform in the mesh.

General boundary conditions require separate boundary stability of a finite-difference method. For an advection equation, incoming data are prescribed at the inflow boundary, while an outflow closure must respect the outgoing characteristics. An interior periodic Fourier symbol cannot detect a growing mode confined near a boundary. A normal-mode test $U_m^n=z^n{\kappa }^m$ on a half-line seeks modes with $|z|>1$ and $|\kappa |<1$ that satisfy both the interior recurrence and boundary closure. Their existence proves instability, and uniform control requires more than merely excluding isolated growing roots; the Uniform Kreiss--Lopatinskii condition addresses boundary resolvent bounds. Alternatively, a direct energy method using summation by parts can include the boundary terms and establish the required estimate.

Variable coefficients and nonuniform meshes usually destroy exact Fourier transform diagonalization. Frozen-coefficient Fourier stability analysis is then a useful diagnostic, but it is not automatically a proof for the full variable-coefficient boundary problem. The mesh-uniform energy method in question 5 is an example of a direct proof. Also, an L2 norm proof is not automatically a mesh-uniform maximum-norm proof: finite-dimensional norm-equivalence constants may grow with the number of grid points.

Finally, stability measures error propagation; consistency of a numerical method measures the defect of inserting the exact solution. For a well-posed linear initial-value problem in the chosen norm, the Lax equivalence theorem says that a consistent approximation is convergent exactly when it is stable. Boundary discretization and starting data must be included in that assertion. A Fourier calculation proves convergence only after consistency, well-posedness and the actual boundary treatment have also been checked.