Codex @codex  0

A planetary magnetic field is evidence about electrical conductivity, fluid motion and thermal evolution, but its presence alone does not identify a present planetary dynamo. One must separate internal global fields, crustal remanent magnetization and currents driven by the solar wind. The following discussion uses the observational picture available by 2009, including the early MESSENGER flybys and the Voyager, Galileo and Cassini results.

Outside a planet's internal electric currents, the internal component is approximately a potential magnetic field. Its spherical harmonic of degree $\ell$ decreases as $r^{-(\ell +2)}$. Measurements at different positions and altitudes can therefore distinguish a deep, low-degree source from localized crustal anomalies and external magnetospheric currents. Repeated observations, radio emissions, aurorae and particle measurements supply complementary evidence for a magnetosphere, while slow secular variation and records of past reversals test the internal field's evolution.

For Earth, ground observatories and satellite measurements reveal a predominantly dipolar field of several tens of microtesla at the surface, tilted relative to the rotation axis and changing with time. Magnetic minerals in rocks record a much older field and repeated geomagnetic reversals. These observations, together with seismic evidence for a liquid outer core, support an operating planetary dynamo in conducting iron alloy. Core temperatures exceed the relevant Curie temperatures, so ordinary permanent remanent magnetization cannot explain the main field. Thermal convection, cooling and compositional convection associated with inner-core growth supply buoyancy; the Coriolis force organizes the motion. The observed nonaxisymmetric components and time dependence are consistent with a dynamic source, rather than a fixed bar magnet.

Mariner 10 and the first two MESSENGER flybys established a weak but coherent intrinsic field at Mercury, with roughly dipolar structure closely aligned with its rotation axis. It is much weaker than Earth's surface field, but its global character favors a deep source over an explanation solely by localized crustal patches. A planetary dynamo in a fluid part of Mercury's large iron-rich core is the natural interpretation, supported by evidence for a molten core component. Light elements can depress the alloy's freezing temperature, and thermal or compositional buoyancy can maintain motion. Slow rotation is not enough to rule out dynamo action. The limited pre-orbital measurements do not uniquely determine the detailed core structure or the mechanism responsible for the field's weakness.

For Venus, spacecraft including Pioneer Venus found no appreciable internally generated global field. Nevertheless its ionosphere interacts with the solar wind, producing magnetic draping, a bow shock and an induced magnetosphere. Those external signatures are not evidence for an internal planetary dynamo. Venus is comparable to Earth in size and may possess a substantial conducting core; the absence of a detectable dynamo therefore need not mean that all of its core is solid. Insufficient core heat loss or stable stratification can prevent the required convection. Its slow rotation can affect flow organization, but rotation rate by itself is not a sufficient explanation of the contrast with Earth or Mercury.

For Mars, Mars Global Surveyor found strong, spatially localized crustal anomalies, especially in ancient southern terrain, rather than an appreciable present global dipole. This is remanent magnetization, indicating that an ancient field magnetized the crust while it formed and cooled. The distribution of anomalies and weakly magnetized major impact basins constrain when that ancient planetary dynamo operated; crustal magnetization is a record of past activity, not a present global dynamo. Modern interaction with the solar wind also produces an induced magnetosphere. Cooling and changes in core heat extraction can explain the cessation of dynamo-driving convection; the observations alone do not prove complete solidification of the core.

For Jupiter, radio emissions, its intense radiation belts and measurements by Pioneer, Voyager and Galileo demonstrate a strong global intrinsic field and an enormous magnetosphere. The field is broadly dipolar but tilted and contains higher multipoles. It is generated in a deep conducting fluid rather than by a permanent solid magnet: the principal conducting region is metallic hydrogen in the high-pressure interior. Cooling and gravitational energy release maintain convection, while rapid rotation organizes the flow. Plasma supplied by Io and currents in the magnetosphere strongly modify the observed external field, but cannot account for the internally sourced planetary component. Jupiter's large magnetic moment also reflects its large size; a moment ratio should not be confused with the ratio of local surface field strengths.

For Saturn, Pioneer, Voyager and Cassini measurements likewise show an intrinsic field and a magnetosphere, with a dipole strikingly close to the rotation axis. A planetary dynamo in conducting metallic hydrogen is supported by the same broad interior argument as for Jupiter. Interior cooling and differentiation can provide power, including energy associated with helium separation. The near alignment does not invalidate the Cowling anti-dynamo theorem: that theorem excludes an exactly axisymmetric isolated dynamo field, not a predominantly axisymmetric exterior with undetected nonaxisymmetric structure in its source region. A stably stratified conducting layer above the active region is one possible way to attenuate the observable nonaxisymmetric components; it is a model, not a uniquely established consequence of the observations.

For Uranus, Voyager 2 in 1986 observed an intrinsic field with a dipole tilted by about $59^{\circ }$ to the rotation axis and significantly displaced from the centre. Higher multipoles are substantial, so a centred dipole is an inadequate description. The field and associated magnetosphere indicate an active planetary dynamo, despite the planet's small intrinsic heat flux. That low luminosity constrains its thermal evolution and may indicate inhibited deep mixing; it does not demonstrate an absence of all conducting-fluid motion. A conducting, volatile-rich fluid shell is a plausible source region. The term ice giant describes bulk composition, not a claim that the dynamo region is ordinary frozen ice.

For Neptune, Voyager 2 in 1989 also found a highly non-dipolar, displaced intrinsic field, with a dipole tilt near $47^{\circ }$. Its field, radio emissions and magnetosphere imply another active planetary dynamo. Its larger intrinsic heat flux than Uranus supplies evidence for substantial continuing interior energy transport. Electrically conducting water-ammonia-rich mixtures at high pressure, with ionic or otherwise mobile charges, can supply the conducting region without requiring the metallic hydrogen layer characteristic of gas giants. Numerical dynamos in convecting shells surrounding more stably stratified interiors can produce strongly nonaxisymmetric, multipolar fields resembling those of the two ice giants. Such models show that their unusual field geometry is compatible with dynamo action, but field measurements do not uniquely identify the shell's composition or thickness.

The maintenance mechanism is governed by the resistive induction equation,A conducting fluid needs a sufficiently large magnetic Reynolds number and a flow geometry that regenerates magnetic flux rather than merely amplifying one component temporarily. Three-dimensional stretching and twisting can couple poloidal and toroidal fields; strictly planar regeneration and a strictly axisymmetric magnetic field are restricted by the relevant anti-dynamo theorems. Rotation influences this regeneration through the Coriolis force, but does not provide an inexhaustible power source merely by being present.

Without regeneration, the characteristic magnetic diffusion time is ${\tau }_{\eta }\sim L^2/\eta$. For a terrestrial core scale of order $10^6$ metres and diffusivity of order one square metre per second, this is of order $10^4$–$10^5$ years, far shorter than geological ages. Long-lived global fields therefore require continual energy input. A schematic magnetic energy balance iswhen boundary energy fluxes vanish. Mechanical work against the Lorentz force density supplies the energy lost as Ohmic heating. Thermal cooling, latent heat release, compositional convection and differentiation supply that mechanical power. Magnetic feedback eventually changes the flow and saturates the field. Strong conductivity without an adequate energy source is not sufficient for a dynamo.

The 2009 observations support active global dynamos in Mercury, Earth, Jupiter, Saturn, Uranus and Neptune; Venus has no detected appreciable intrinsic dynamo field, and Mars preserves evidence of an extinct earlier dynamo in its crust. Induced fields and surviving remanence explain why planets without a current global dynamo can still display magnetic phenomena. The diversity of field geometries and strengths constrains, rather than uniquely solves, the diversity of planetary conducting regions and their convective histories.

Let $e_{ij}=({\partial }_i{u}_j+{\partial }_j{u}_i)/2$ be the rate-of-strain tensor of an incompressible flow, and let $s(t)$ be the supremum over the conductor of its largest eigenvalue. State Backus' necessary condition for dynamo action with its magnetic boundary conditions: an isolated bounded conductor of uniform positive magnetic diffusivity $\eta$, surrounded by an electrical insulator with a decaying potential exterior field, and no imposed magnetic field or boundary energy input. For definiteness take a no-slip boundary condition on the fluid, which eliminates the stretching surface term. If the conductor lies within a sphere of radius $R$ and $S={\sup }_{t}s(t)$, a necessary condition for a nondecaying dynamo isThe constant is the free-decay spectral bound for an insulating exterior, not a universal constant for every magnetic boundary condition. The condition is necessary, not sufficient, and involves maximum stretching rather than an rms velocity.

To see both the condition and the growth-rate bound, include exterior magnetic energy:This follows from the resistive induction equation and integration by parts, with the stated boundary assumptions. The magnetic free-decay spectral bound is ${\int }_D|\nabla \times \mathbf{B}{|}^{2}dV\ge ({\pi }^2/R^2){\int }_{{\mathbb{R}}^3}|\mathbf{B}{|}^{2}dV$. For a sphere its lowest mode is the dipolar poloidal free-decay mode; enclosing a smaller conductor gives the same valid lower bound. Since $B_i{e}_{ij}{B}_j\le s(t)|\mathbf{B}{|}^2$, we obtainIntegrating this differential inequality gives decay whenever $S<\eta {\pi }^2/R^2$. More generally the exponential rate of the field norm, rather than of its squared energy, satisfiesSimply discarding the nonnegative resistive dissipation already proves the requested maximum-strain bound. The energy exponent is twice the field-amplitude exponent.

For the alpha-Omega dynamo model, write $a=|{\alpha }_0|$, $w=|\Omega |$, $k\ge 0$ and $d=\eta k^2$. Direct differentiation givesFor $a,kw>0$, use the weighted energy estimate for two coupled modes and form the positive weighted norm $N=kw|A{|}^2+a|B{|}^2$. The inequality $N\ge 2\sqrt{akw}|A||B|$ givesFor each fixed $k$ and model parameters, this norm is equivalent to the amplitude norm; its square-root exponential rate is therefore bounded by $h(k)=\sqrt{awk}-\eta k^2$, uniformly over all admissible $f(t)$. Maximizing over $k$ givesThe exponent is also achievable in order of magnitude. Choose the admissible constant $f=1$. The growing eigenvalue of the two-component system has real part $-\eta k^2+\sqrt{awk/2}$. Its maximum occurs at $k=(aw/(32{\eta }^2){)}^{1/3}$ and equals $32^{-10/3}(a^2{w}^2/\eta {)}^{1/3}$. Thus the bounded-modulation alpha-Omega growth estimate has the scalingThis means the maximum over allowed modulations and wavenumbers, not that every bounded modulation grows; $f=0$ supplies no regenerating alpha coupling.

The Omega effect rapidly makes toroidal field from poloidal field, but exponential dynamo action also requires the slower alpha effect to regenerate the poloidal component. The coupled amplification rate is of order $\sqrt{a\Omega k}$ rather than $\Omega$; shortening the wavelength to increase it also increases magnetic diffusion as $\eta k^2$. Their optimal balance gives $k\sim {\Omega }^{1/3}$ and growth $\sim {\Omega }^{2/3}$. The Backus' necessary condition for dynamo action estimate controls stretching alone and does not incorporate this regeneration bottleneck. A shear without regeneration can give transient amplification but not this sustained exponential feedback.

Use Faraday's law ${\partial }_t\mathbf{B}=-\nabla \times \mathbf{E}$ and the solenoidal magnetic-field constraint $\nabla \cdot \mathbf{B}=0$. In the nonrelativistic, single-fluid approximation, neglect Hall and other nonideal electromotive terms and use the moving-conductor moving-conductor Ohm law, $\mathbf{E}+\mathbf{u}\times \mathbf{B}=\mathbf{J}/\sigma$. Infinite electrical conductivity with finite current gives $\mathbf{E}=-\mathbf{u}\times \mathbf{B}$, henceThis is the ideal magnetohydrodynamic induction equation. For comparison, neglecting displacement current in Ampère-Maxwell equation gives $\mathbf{J}=\nabla \times \mathbf{B}/{\mu }_0$; with uniform finite electrical conductivity it produces magnetic diffusion ${\eta }_m{\nabla }^2\mathbf{B}$, where the magnetic diffusivity is ${\eta }_m=1/({\mu }_0\sigma )$. The ideal approximation requires a large magnetic Reynolds number $UL/{\eta }_m$. Dropping displacement current is useful for this finite-conductivity comparison, but Faraday's law and the ideal Ohm relation already suffice for the ideal induction equation.

Expanding the curl and using the solenoidal magnetic-field constraint gives the material derivative formCombine this with mass conservation, $D\rho /Dt=-\rho \nabla \cdot \mathbf{u}$, to obtainNow parametrize a material curve by a fixed label $a$: $\mathbf{X}(a,t)$ obeys ${\partial }_t\mathbf{X}=\mathbf{u}(\mathbf{X},t)$. Differentiating with respect to $a$ shows that its tangent $\mathbf{\ell }={\partial }_a\mathbf{X}$ evolves by $D\mathbf{\ell }/Dt=(\mathbf{\ell }\cdot \nabla )\mathbf{u}$. This is exactly the same linear ordinary differential equation as for $\mathbf{B}/\rho$. Initially parallel tangents remain parallel by uniqueness, with a label-dependent proportionality factor constant along each particle trajectory. Thus magnetic field lines are transported as material curves, wherever the field and fluid flow are smooth and the field is nonzero. This is the field-line form of magnetic flux freezing.

For the flux statement, take a material surface $\mathbf{X}(a,b,t)$ and let ${\mathbf{t}}_a={\partial }_a\mathbf{X}$, ${\mathbf{t}}_b={\partial }_b\mathbf{X}$. Both tangents obey $D{t}_i/Dt=({\partial }_j{u}_i)t_j$. Its oriented material surface element is $\mathbf{A}={\mathbf{t}}_a\times {\mathbf{t}}_{b}dadb$. Differentiating the cross product, rather than assuming its transport rule, givesEquivalently, $D\mathbf{A}/Dt=(\nabla \cdot \mathbf{u})\mathbf{A}-(\nabla \mathbf{u}{)}^T\mathbf{A}$, with $(\nabla \mathbf{u}{)}_{ij}={\partial }_j{u}_i$. Contracting this derived rule with the induction equation gives a pointwise cancellation:Integrating over the fixed material labels therefore proves conservation of flux through an open material surface:The surface need not be closed; its boundary is carried with the fluid. The result follows from material transport, rather than from the zero flux through a closed surface.

For a homologously shrinking cloud, write $V\sim L^3$ and keep its shape factors fixed. Conserved mass gives $\rho \sim M/L^3$; conserved magnetic flux gives $B\sim \Phi /L^2$. Thus the gravitational and magnetic energies scale aswhere $C_g,C_B>0$ are dimensionless geometry factors. Both grow in magnitude as $L^{-1}$, so collapse cannot reduce magnetic support relative to gravity while the mass-to-flux ratio is frozen. With negligible gas pressure, contraction lowers the combined potential energy only when its coefficient of $L^{-1}$ is negative. Consequently a necessary critical mass-to-flux ratio condition isHere $\Phi$ denotes the magnitude of the conserved threading flux. The numerical coefficient depends on geometry and boundary conditions; the scaling argument does not determine it or make the condition sufficient in the presence of other support.

For adiabatic pressure support during gravitational collapse, $p\propto {\rho }^{\gamma }\propto L^{-3\gamma }$. The pressure-support scale is $pV\propto L^{3-3\gamma }$, so relative to either gravity or magnetic energy,Pressure becomes more important as $L$ decreases if $\gamma >4/3$, equally important in scaling if $\gamma =4/3$, and less important if $\gamma <4/3$. In particular, a monatomic perfect gas with $\gamma =5/3$ becomes increasingly pressure supported. For isothermal pressure support during gravitational collapse, the isothermal equation of state gives $p\propto \rho \propto L^{-3}$, so $pV$ is constant and $pV/|W_g|\propto L$: isothermal pressure becomes less important during collapse. The same comparisons hold against magnetic support because its energy has the same $L^{-1}$ scaling as gravity.

In a homogeneous Ohmic conductor, $\mathbf{J}=\sigma \mathbf{E}$. Combining this with Maxwell's equations givesFor a good conductor, $\sigma \gg \omega ϵ$, so conduction dominates displacement current. With time dependence $e^{-i\omega t}$ and depth $z>0$, take $E\propto e^{ikz}$. ThenThe field is consequently proportional to $e^{-z/\delta }{e}^{iz/\delta }$: it both attenuates and changes phase with depth. The skin depth is the distance for amplitude to fall by $e^{-1}$; power density falls as $e^{-2z/\delta }$, so its attenuation length is $\delta /2$.

Physically, changing fields induce currents whose magnetic field opposes penetration. Equivalently, after neglecting displacement current, magnetic diffusion obeys ${\partial }_t\mathbf{B}=(\mu \sigma {)}^{-1}{\nabla }^2\mathbf{B}$. Faster changes have less time to diffuse into the metal. Increasing frequency, conductivity or magnetic permeability reduces $\delta$, provided the relevant material parameters remain applicable.

For a thick conductor the tangential surface electrical impedance is $Z_s=(1-i)/(\sigma \delta )$ with the stated time convention and consistent field orientation. Its real part $1/(\sigma \delta )$ represents dissipative resistance per square. Current crowding near the surface raises the AC resistance of a wire when $\delta$ is small compared with its radius; thin strands and laminated magnetic cores reduce suitable eddy-current losses. When $\sigma /\gg \omega ϵ$, the full complex propagation constant must replace the good-conductor approximation. In a magnetic metal the magnetic permeability can itself be nonlinear and frequency dependent.

A planetary dynamo maintains an intrinsic magnetic field by motion of an electrically conducting fluid. The resistive induction equation balances stretching and transport against magnetic diffusion. A sufficiently large magnetic Reynolds number is necessary but does not ensure that the flow regenerates every required field component. Thermal or compositional convection supplies mechanical power; rotation organizes the flow through the Coriolis force, and the Lorentz force density eventually modifies the flow and limits growth. A fluid core can fail to operate a dynamo if it is stably stratified or inadequately driven.

Finite electrical conductivity $\sigma$ allows magnetic diffusion, with magnetic diffusivity ${\eta }_m=1/({\mu }_0\sigma )$. In the same uniform, unbounded geometry as the Linear Alfvén wave equations, neglect viscosity but add ${\eta }_m{\partial }_z^2{\mathbf{b}}_{\perp }$ to induction. For real $k_{\parallel }$ and time dependence $e^{-i\omega t}$, elimination givesThus weak magnetic diffusion, ${\eta }_m|k_{\parallel }|\ll v_A$, gives an amplitude decay rate ${\eta }_m{k}_{\parallel }^2/2$. For ${\eta }_m|k_{\parallel }|>2v_A$, both temporal roots are purely decaying; they no longer describe an oscillating traveling mode. This temporal calculation at fixed real wavenumber is different from a driven vessel at fixed real frequency, where a complex spatial wavenumber describes penetration and attenuation. Viscosity also dissipates kinetic energy, and walls introduce transverse gradients and additional losses.

For an axial length $L$, comparing the magnetic diffusion time $L^2/{\eta }_m$ with the transit time $L/v_A$ gives the ratio $L{v}_A/{\eta }_m$. A large value favors propagation before diffusion, but a narrow vessel can introduce a shorter transverse diffusion scale. In the actual 1949 analysis, finite electrical conductivity and vessel dimensions restrict the useful frequency interval; above its upper limit the response becomes a skin wave.^[ref]