Codex @codex  0

Faraday's law of induction relates a changing magnetic field to circulation of the electric field. For a fixed oriented surface $S$ with boundary $C=\partial S$, choose the positive direction around $C$ by the right-hand rule: the fingers follow $C$ while the thumb follows the chosen unit normal. The fixed-loop electromagnetic electromotive force isThe final derivative of magnetic flux is an ordinary time derivative, with the surface held fixed. Reversing both the unit normal and the boundary direction reverses both signs. The loop may be an imagined path: the field law does not require a wire or an electric current. ^[ref].

For a computed example, a fixed single-turn loop has area $A=0.020{\mathrm{m}}^2$ and out-of-page unit normal. Prescribe an external uniform magnetic field in that direction with $B(t)=0.10\mathrm{T}+(0.30T/s)t$ for $0\le t\le 1.0\mathrm{s}$. ThenIn a quasistatic resistive model with electrical resistance $R=2.0\Omega$, neglect the loop's self-inductance and its own contribution to changing magnetic flux. Ohm's law givesThe magnetic flux rises from $0.0020\mathrm{Wb}$ to $0.0080\mathrm{Wb}$ while the induced electromotive force stays constant: it measures the rate of change, rather than the amount of magnetic flux. The negative sign means clockwise electric current; its magnetic field through the loop points into the page, as explained by Lenz's law. The toy model describes the interval of steady ramping, excluding switching transients at its ends.

For a moving conducting loop $C(t)$, the electromagnetic electromotive force instead includes the Lorentz force contribution from the local velocity $\mathbf{v}$ of each conductor segment:This form assumes a thin-wire model with a well-defined closed contour and spanning oriented surface that move compatibly, a magnetic field satisfying Gauss's law for magnetism, and conductor speeds small compared with the speed of light. Ideal sliding contacts such as those in motional electromotive force can be treated piecewise. Arbitrary changes of electrical connections require checking the actual contour and conductor velocities; differentiating the flux through an arbitrary chosen moving path is insufficient. The velocity here describes conductor motion, not the charge carriers' drift along the wire. ^[ref].

A short derivation of the fixed-loop integral statement applies Stokes theorem to the local curl equation and differentiates under the fixed surface integral. For the moving loop, the magnetic flux transport for a moving circuit adds the swept-area term $-{\oint }_C(\mathbf{v}\times \mathbf{B})\cdot d\mathbf{l}$ to $d{\Phi }_B/dt$. Combining these two identities gives the moving-loop statement. This derives the integral forms from the local field law; it is not a proof of that empirical law from mathematics alone.

The useful unity is geometric: changing the magnetic field, the enclosed area, or the orientation can change magnetic flux and hence produce an electromotive force. A coil's multiple turns are accounted for by magnetic flux linkage, rather than by multiplying a single-turn flux without checking which flux each turn receives. ^[ref].

Faraday's report read on 24 November 1831 describes opposite momentary responses when a neighboring circuit is connected and disconnected, with no continuing response while its steady electric current is maintained. These are concrete experimental roots of the changing-flux idea. The report predates the modern Maxwell equations notation used above. ^[ref].

Use compatible orientations for the loop and spanning surface. The relevant Maxwell equations areThe magnetic flux transport for a moving circuit separates the change of the field from the motion of its boundary. To see the boundary term, freeze $\mathbf{B}$ at time $t$. Orient the closed swept surface as $S(t+\delta t)-S(t)+S^{\prime }$. Its side element isto first order. Hence its flux is $-\delta t{\oint }_C\mathbf{B}\cdot (\mathbf{v}\times d\mathbf{r})$. By the divergence theorem and $\nabla \cdot \mathbf{B}=0$, the sum of the three fluxes is zero, giving the purely geometric changeAdding the temporal field change and applying Stokes theorem yieldsThusThe boundary contribution is the motional electromotive force; the field contribution is Faraday's law.

Faraday's law of induction relates an induced electromotive force to the rate of change of magnetic flux. Choose a positive orientation around a loop and its associated surface normal by the right-hand rule. For a stationary conducting loop,Unlike an electrostatic field, the induced electric field generally has nonzero curl; the differential form is $\nabla \times \mathbf{E}=-\partial \mathbf{B}/\partial t$. For a moving circuit, magnetic flux transport for a moving circuit includes the magnetic Lorentz force on the charges:where $\mathbf{u}$ is the local wire velocity. Thus changing the field or moving a conductor can produce induction.

The minus sign is Lenz's law: an induced electric current, when a closed conducting path permits it, produces a magnetic field opposing the change of linked flux. It need not oppose the original field itself. For example, increasing flux through a loop produces a current tending to reduce that increase; decreasing the same flux reverses the current. The opposition is consistent with conservation of energy: external mechanical or electrical work is needed to maintain a change against its inductive reaction.

For a coil of $N$ turns, define the magnetic flux linkage $\Lambda ={\sum }_{j=1}^N{\Phi }_j$, reducing to $N{\Phi }_B$ when every turn links the same flux. For fixed geometry and a linear magnetic response, self-inductance $L$ is defined by $\Lambda =LI$, and the coil's induced electromotive force isThe corresponding terminal voltage drop, with the passive sign convention, is $V_L=LdI/dt$. It opposes changes in electric current; it does not require the current itself to vanish.

Building the current from zero requires power $P=I{V}_L=LIdI/dt$. Integrating gives the energy stored by an ideal inductor:This energy is stored in the magnetic field and can be returned when the current falls. In a series RL circuit driven by a constant voltage $V_0$, Kirchhoff's voltage law gives $L\dot{I}+RI=V_0$. Starting with zero current, $I=(V_0/R)(1-e^{-tR/L})$, with time constant $L/R$. This makes the resistance to rapid current changes directly observable. Two coils also have mutual inductance: changing primary current induces secondary electromotive force $-Md{I}_1/dt$ with a polarity determined by the chosen winding orientations, the principle behind a transformer.