Past exam of the physics 2 paper of the University of Oxford / 2019 / 10 / a

Use complex phasors with time dependence $e^{i\omega t}$ and assume an unloaded output. The capacitor has electrical impedance $Z_C=1/(i\omega C)$. The voltage divider formed with the resistor gives the transfer functionFor input $V_i(t)=V_{i0}\cos \omega t$, the output amplitude and phase shift areso $V_o(t)=|{\tilde{V}}_o|\cos (\omega t-{\tan }^{-1}(\omega RC))$.

Here $\tau =RC=16.0\mu \mathrm{s}$, and the cutoff frequency is $f_c=1/(2\pi RC)=9.947\mathrm{kHz}$. This is an RC low-pass filter: at small frequency the capacitor has large electrical impedance and the output nearly equals the input; at large frequency it increasingly shunts the signal to ground. The amplitude then falls as $1/f$, and the phase shift approaches $-90^{\circ }$.

No numerical input amplitude is supplied, so the output voltages are specified as fractions of $V_{i0}$. An application is suppression of high-frequency electrical noise on a slowly varying signal. A finite load changes the transfer function and must be included if its electrical impedance is comparable with the circuit's output electrical impedance.