Past exam of the physics 2 paper of the University of Oxford / 2021 / 11

Faraday's law of induction states that the induced electromotive force around an oriented closed circuit equals the negative rate of change of linked magnetic flux. For a stationary circuit,Here $\mathbf{E}$ is electric field, $\mathbf{B}$ is magnetic flux density, and the oriented surface $A$ has the circuit as its boundary. For $N$ identical series turns, replace ${\Phi }_B$ by the total flux linkage $N{\Phi }_B$. Lenz's law supplies the sign: an induced electric current opposes the change of linked magnetic flux, in agreement with conservation of energy.

If the wire moves with local velocity $\mathbf{u}$, the more general electromotive force includes the magnetic Lorentz force per unit electric charge:The boundary and surface orientations in both expressions are related by the right-hand rule.

In the long-solenoid approximation, the internal magnetic flux density is uniform, $B={\mu }_{0}nI$, and the external magnetic field is negligible. This follows from the magnetostatic Ampère law applied to a rectangular loop running inside and outside the solenoid. Its number of turns is $N=nD$ and its cross-sectional area is $A=\pi a^2$. Each turn links magnetic flux ${\Phi }_B=BA={\mu }_{0}nI\pi a^2$. Therefore the flux linkage isUsing the definition of self-inductance, $\Lambda =LI$, givesThis neglects end leakage and winding thickness and uses vacuum permeability for the air core.

For the imposed electric current $I=I_0\cos \omega t$, Faraday's law gives the self-induced electromotive forceThe externally applied terminal voltage, with the passive sign convention, has the opposite sign:Thus the terminal voltage leads the electric current by $\pi /2$. The instantaneous input power isAn ideal inductor alternately stores magnetic energy and returns it to the source. Real winding electrical resistance would add mean Joule heating $I_0^2{R}_w/2$; the ideal zero result assumes that loss is neglected.

The single secondary turn links the primary magnetic flux ${\mu }_{0}n\pi a^2{I}_p$, so its mutual inductance with the primary isChoose positive winding directions so that positive secondary electric current would reinforce the primary magnetic flux. Faraday's law and Kirchhoff's voltage law then giveAfter the transient proportional to $e^{-Rt/L_s}$ has decayed, put $\alpha ={\tan }^{-1}(\omega L_s/R)$. The steady electric current isIts wave amplitude is $\omega M{I}_0/\sqrt{R^2+(\omega L_s{)}^2}$ and it lags the induced electromotive force by $\alpha$. Relative to the primary $I_0\cos \omega t$, its phase shift is $-\pi /2-\alpha$, modulo $2\pi$. Reversing the chosen secondary winding direction adds $\pi$ to this signed phase shift and leaves all power predictions unchanged.

The lamp's mean Joule heating isFor $\omega L_s\ll R$ the response is nearly in phase with the induced electromotive force; for $\omega L_s\gg R$ the secondary electric current nearly opposes the primary electric current in the stated winding convention.

The positive lamp power comes from extra work by the primary current source. The secondary electric current creates a changing magnetic flux through the primary, so maintaining the same prescribed primary electric current requires an additional terminal voltage. With the preceding winding convention,Using phasors, ${\tilde{I}}_s=-i\omega M{\tilde{I}}_p/(R+i\omega L_s)$, hence the primary sees the complex impedanceIt follows directly thatThis is the reflected impedance of the secondary load. The self-inductance and mutual inductance terms exchange stored magnetic energy, while the lamp dissipates it. Multiplying the two coupled equations from Kirchhoff's voltage law by their respective electric currents also gives the instantaneous conservation of energy identityThe derivative averages to zero in periodic steady state. A fixed primary current source supplies the required extra voltage; a fixed voltage source would generally change its primary electric current when the lamp is connected.