Pulmonary-vein backflow component 2026-11-05
The pulmonary-vein backflow component comprises represented blood that leaves the left atrium through a pulmonary vein, toward the lungs. In atrial flow component analysis, the exit boundary distinguishes it from blood delivered through the mitral valve. The Bäck study includes both newly entering blood that returns to a pulmonary vein and previously resident atrial blood taking that exit.[ref]
An original signed-flow example explains why forward and backward transport should be recorded separately. Orient a pulmonary vein's boundary normal toward the left atrium, so positive volumetric flow rate denotes inflow. Define gross entering and leaving volumes over an observation interval byThe net transferred volume is . Constructed values mL and mL give 55 mL net inflow. Reporting only that net value hides the 5 mL reversal. Summing over all pulmonary veins gives a chamber-level boundary balance.
A boundary integral and a parcel history nevertheless answer different questions. If the same represented parcel crosses outward twice after re-entering, a gross boundary integral counts both crossings. A pathline-based component needs an explicit rule for repeated crossings and its observation window before its volume can be equated with that integral. Similarly, this route is not mitral regurgitation: the latter concerns reverse transport across the mitral valve, a different boundary. An outlet direction alone does not establish a diagnosis or the age of the blood taking that route.
Streakline Created 2026-09-24 Updated 2026-10-13
A streakline at observation time is the set of present positions of all fluid elements that passed through one fixed release point during a specified history of injection. For continuous release over , solve a different initial value problem for each release time :Thus a pathline varies for one particle; a streakline varies while holding fixed. Interrupted release gives only the corresponding subsets of the streakline. A moving nozzle requires a time-dependent release position instead, so the standard fixed-point definition should not silently be applied to it. Continuous release makes streaklines easy to observe and useful for showing where material from one source has reached. [ref]
https://web.mit.edu/13.021/demos/lectures/lecture2.pdf. MIT Marine Hydrodynamics, lecture 2, section 1.2
In the analytical velocity field of pathline, a particle released at the origin at time followsObserve all particles together at time , after continuous release from :For , and , the streakline is the downward-curving parabola in metre coordinates. Releases at occupy , and , respectively. At , the streakline lies above the pathline and below the origin's streamline . All particles nevertheless have the same present velocity . The streakline slope generally differs from the present velocity slope ; they agree at the nozzle. The oldest particle is the downstream endpoint, which explains why the pathline and streakline meet there without being the same curve.
Each panel fixes one observation time. Coloured dots are the present positions of particles with the indicated release times; dashed pathlines show those particles' earlier histories. The black streakline connects present positions of the continuously released family, including release times between the sampled dots. After , particles already present keep moving and new ones enter at the origin, so the later streakline is not a frozen record of the earlier one. Injection beginning only at would show just of the curve. Both panels are diffusion-free analytical models, not experimental photographs.
Kline's contracting-channel demonstration switches from marking an element to continuous bubble production at a marking wire: the resulting trace is a streakline. The apparatus therefore changes the curve being displayed by changing the marking history, even with the same channel. A wire produces a family of traces; conceptually each fixed emitting location supplies its own streakline. Individual bubbles are markers rather than perfect fluid elements: Jean Hertzberg's teaching notes describe hydrogen production by electrolysis at a thin cathode wire and warn that larger bubbles have more buoyancy. [ref] [ref]
https://www.flowvis.org/Flow%20Vis%20Guide/particles-3-in-water/. Jean Hertzberg and Flow Vis course students, Particles 3: In Water
A dye version uses a small fixed injection port upstream in a transparent water channel, a dilute premix of dye with the channel water, illumination and a fixed optical camera. Start continuous injection at a recorded time and take a short exposure at : the visible filament approximates a streakline, not the accumulated pathline of one particle. Repeat with the same port and imaging geometry after changing the flow with time; compare the filament against local directions estimated from short displacements of sparse markers at . Agreement in a steady flow and possible disagreement when the flow changes are the predictions being tested; no measured curves are claimed here. The protocol follows Hertzberg's advice to use small ports, little injected volume and a dilute premix with matched density and viscosity. Check for nozzle disturbance by reducing injection rate, for buoyancy by watching the premix in still water, and for diffusion by comparing filament widths at different ages. Keep exposure short enough to suppress motion blur. Dye concentration approximates a passive scalar only when it has negligible feedback on the velocity field; finite port width, diffusion and out-of-plane motion limit how literally a visible filament can be read as a geometrical streakline. [ref]
https://www.flowvis.org/Flow%20Vis%20Guide/do-not-disturb-dyes-in-liquids/. Jean Hertzberg and Flow Vis course students, Dye Techniques 1: Do Not Disturb
Streamline Created 2026-09-24 Updated 2026-10-13
A streamline at a specified instant is a curve whose tangent line follows the velocity field at that same frozen instant everywhere along the curve. One convenient integral curve parameterization isHere is an auxiliary curve parameter, with units of seconds in this convention; advancing does not advance physical time. Any regular reparameterization preserves the tangent geometry. Where , a planar streamline satisfies evaluated at time . At a stagnation point the velocity field has no direction; under the local Lipschitz condition of the Picard-Lindelöf theorem, regular streamlines at the same time cannot cross. A streamline answers which directions fit together now, making it useful for describing local flow geometry. [ref]
In the analytical velocity field introduced under pathline, the streamline through the origin at time isAt this is when both coordinates are expressed in metres. At its height is , whereas the earlier pathline of the origin's first released fluid element has height . Its instantaneous streamline at the final position is instead : the pathline is tangent to that streamline at its current endpoint, although its recorded history does not lie along it.
The green streamline uses the velocity field at throughout; the orange pathline uses times ; the purple streakline uses different release times at the single observation time . The grey arrows all show the instantaneous velocity direction at . These are exact analytical curves with chosen units, not measured dye shapes.
In a steady flow in a fixed reference frame, a pathline and a streamline solve the same autonomous ordinary differential equation. Uniqueness makes each particle released from a fixed point follow the same integral curve, so its pathline, the streakline from that point and the streamline share one geometrical curve. Finite recording or release intervals usually show different segments of that curve; the comparison assumes particles stay in the domain and treats stationary fluid elements separately. Neither two-dimensionality nor incompressibility is needed for this coincidence. Steadiness is sufficient, but is not necessary: with smooth changes speed while preserving the same integral curves. In a general time-dependent velocity field, however, the three curves differ. Kline explains why continuous dye release in steady flow can therefore display streamlines. [ref]
For two-dimensional incompressible flow, the convention gives , so regular streamlines are level sets of the stream function at each frozen time. In time-dependent incompressible flow, that does not force a pathline to stay on one numerical value of : its material derivative is . The distinction is the difference between a geometric snapshot and a parcel's history.
Vorticity Created 2026-09-24 Updated 2026-10-13
Use vorticity to distinguish the local spin of a fluid element from the motion of its center along a pathline. Circular streamlines can occur both with and without vorticity: the two velocity fields below even have the same circulation around the unit circle.
Solid-body rotation and a potential line vortex: equal unit-circle circulation, different local vorticity
. Details. For a continuously differentiable velocity field , vorticity is the curl vectorEach partial derivative divides velocity by distance, so vorticity has units . In a planar velocity field independent of , only survives. Positive points along : the right-hand rule associates it with counterclockwise spin viewed from positive toward the plane. [ref]
The local rotational angular velocity is half the vorticity, . To see the factor, split the velocity gradient into its symmetric rate-of-strain tensor and antisymmetric spin tensor . A nearby displacement has relative velocity ; its rotational part satisfies . This is a proof outline of the local spin interpretation. The rate-of-strain tensor can also change the angle of a particular material line, so that line's angular velocity need not equal .
For solid-body rotation, gives and . Taking , the vorticity is , although the angular velocity is only . For the potential line vortex, , the planar curl is wherever . Its circular pathlines therefore coexist with zero local spin.
This distinction makes vorticity useful for recognizing shear flow as well as swirling motion; taking the curl of the Euler equations also removes a pressure gradient and leads to the vorticity equation. A historical landmark is Hermann von Helmholtz's 1858 paper on fluid vortex motion, an early study devoted to vortex dynamics. [ref]
https://zenodo.org/records/1448878. H. Helmholtz, Über Integrale der hydrodynamischen Gleichungen, welche den Wirbelbewegungen entsprechen (1858)
Vorticity of a linear shear flow Created 2026-10-14 Updated 2026-10-25
Use a linear shear flow to see why straight pathlines can still carry local spin. Faster layers pull past slower ones, and a small symmetric paddle can turn clockwise while its center travels straight ahead.
Straight particle paths in linear shear coexist with clockwise local spin and material-line deformation
. Details. For the planar simple shear flow with constant signed shear rate , direct differentiation givesWith , these are and : both signs indicate clockwise orientation under the right-hand rule. Yet a particle initially at follows the straight pathline , . The curl measures differences of velocity between neighboring particles, rather than bending of one particle's pathline.
The velocity gradient has as its only nonzero entry. Its spin tensor supplies clockwise rotation, while its rate-of-strain tensor supplies simultaneous deformation. For a material line making angle to the horizontal, the equation gives . Initially horizontal and vertical material lines therefore have angular velocities and ; their mean is . At with , an initially vertical displacement becomes times its original length and has angle , a clockwise change of . The plotted cross deforms; an actual paddle's response also depends on its shape and interaction with the fluid. The exact local spin statement concerns the spin tensor, rather than every tracer's orientation.



