Stefan–Boltzmann law Created 2026-09-24 Updated 2026-10-14
The Stefan–Boltzmann law gives the total hemispherical radiant exitance of an ideal blackbody at absolute temperature :Here is the Stefan-Boltzmann constant. Total means integrated over all wavelengths; hemispherical means integrated over all outward directions with the projected area weighting. Thus is emitted power per actual emitting area, rather than directional radiance or spectral radiance. Absolute temperature must be in kelvin; raising a Celsius reading to the fourth power gives the wrong result. A uniform surface of area emits radiant flux . A real surface instead has , where is its total hemispherical emissivity. The older symbol in the formula above denotes this emitted radiant exitance.[ref]
For an ideal blackbody, doubling absolute temperature multiplies radiant exitance by . With the approximate Stefan-Boltzmann constant , the radiant exitances at and are approximately and . This steep response explains why thermal radiation becomes so consequential at high temperature. It also enables heat transfer through a vacuum, where thermal conduction through a gas and convection are absent.
The fourth-power rise of radiant exitance and the subtraction needed for net radiative heat exchange
. Original model curves. The left panel is total hemispherical blackbody radiant exitance. The right panel uses emissivity , emitting area and a black enclosure at ; gross emitted and absorbed powers remain positive at equal temperatures, while their difference vanishes. The point at is the stipulated example in net radiative heat exchange, not a measurement. Details.A short derivation integrates Planck's law in its frequency form. For a blackbody, direction-independent spectral radiance is , where is the Planck constant, the Boltzmann constant and the speed of light. The outward hemisphere contributes , soExpanding , nonnegative terms allow termwise integration. Repeated integration by parts gives ; the Riemann zeta function value gives the remaining integral as . Hence with the coefficient in Stefan-Boltzmann constant. The angular integral is essential: omitting it confuses radiance with radiant exitance.
Vacuum conservation of specific intensity Created 2026-10-06 Updated 2026-10-14
In a transparent, stationary vacuum with Euclidean geometry and observers at rest in the same frame, the radiative transfer equation has zero absorption and emission, so along a light ray. The same specific intensity reaches the observer without geometric dilution. More generally, is a Lorentz invariant; collisionless propagation preserves this ratio along a ray even with gravitational or cosmological redshift, rather than preserving at shifted frequencies. [ref]
https://www.roe.ac.uk/japwww/teaching/ram5/ram5_2018.pdf#page=27. John Peacock, Radiation and Matter, 2018–2019, §4.1, Conservation of intensity and equation (140)
.The elementary geometry is instructive. Two facing surface elements separated by distance exchange spectral radiant fluxThe receiver subtends at the source. Describing that same traveling beam at the receiver instead uses . Both descriptions have identical geometric factors, so conservation of its radiant flux gives equal specific intensities at the two ends. This compares the same propagation direction at both ends, not emission in the opposite direction.
A uniform source remains equally bright per resolved direction under these assumptions, but occupies a smaller apparent solid angle farther away. For a small source of projected area at distance and a small receiver facing it, irradiance is approximately . The radiant flux intercepted by receiver area is approximately . With , and , distances and give and , and received radiant fluxes of and . The inverse-square law concerns collected radiation from the whole source; remains at either distance.
Zero-dimensional planetary energy balance Created 2026-10-13 Updated 2026-10-20
Consider an idealized planet that is a sphere of radius , illuminated by parallel sunlight of irradiance , measured on a plane perpendicular to the rays. Its intercepting projected area is , whereas its total surface area is . Therefore the incoming power averaged per unit total surface area iswhere is the broadband Bond albedo. The factor four is a sphere geometry result, not an atmospheric transmission factor. Local sunlight still varies over the illuminated hemisphere and vanishes on the dark side.
Now stipulate a single spatially uniform temperature , no atmosphere, no internal heating, and emissivity one for outgoing thermal radiation. This is a thermal blackbody model using the Stefan–Boltzmann law; the prescribed solar-band reflection is treated separately, so the body is not a perfect absorber at all wavelengths. Let be the effective heat capacity per unit surface area, in . Conservation of energy gives the ordinary differential equationHere is net heating per unit surface area, in , and is the Stefan-Boltzmann constant. Use , rounded from the exact constant reported by NIST. [ref]
https://physics.nist.gov/cgi-bin/cuu/Value?sigma%7Csearch_for=stefan+boltzmann. NIST, CODATA value: Stefan-Boltzmann constant
The uniform temperature is a model assumption: generally the surface average of differs from the fourth power of the surface-average temperature.For fixed Bond albedo , radiative equilibrium requires , givingWith the illustrative solar constant , the global incoming average is :
| Fixed Bond albedo | Reflected average () | Absorbed average () | Equilibrium temperature () |
|---|---|---|---|
Doubling albedo here lowers the equilibrium temperature by , rather than halving it: the absorbed fraction changes from to , and thermal radiation scales as . These stipulated Bond albedos are whole-planet examples, not measurements of bare water and ice. The model predicts neither Earth's modern surface temperature nor its response to actual climate change; it omits the greenhouse effect, spatial heat transfer and seasons.
Each fixed-albedo equilibrium is a stable equilibrium: for , the derivative is . A small temperature increase produces net cooling, and a small decrease produces net heating. This is the simplest expression of the stabilizing Planck feedback. Allowing albedo to fall with temperature adds a competing term, as in ice-ocean albedo feedback.

