Basic oxygen furnace 2026-11-05
A basic oxygen furnace is a refractory-lined converter used for basic oxygen steelmaking. It holds molten pig iron, recycled steel and fluxes while an oxygen supply drives refining reactions. The vessel must contain the bath and slag, accommodate vigorous mixing and allow the finished steel and reaction products to be removed.[ref]
Its thermal balance couples composition and charge selection: oxidation releases heat, while heating and melting additions consume it. This makes the furnace a useful example of simultaneous mass balance and energy balance. The furnace is the physical reactor; the steelmaking process includes its operation, measurements and composition adjustments.
Basic oxygen steelmaking 2026-11-05
Basic oxygen steelmaking refines molten pig iron into steel by blowing high-purity oxygen into the bath. Oxidation lowers the carbon content and removes or redistributes other constituents. The reactions release heat, helping melt added recycled steel. The basic oxygen furnace is the vessel in which the operation takes place.[ref]
Steel Production by the American Iron and Steel Institute. BF/BOF route and recycled steel input
The word basic refers to the chemical character of the lining and slag, not to the simplicity of the process. A basic slag helps capture acidic oxides formed during refining. A useful process description must therefore track both the metallic product and the nonmetallic reaction products; a low final carbon content alone does not specify a steel's full chemical composition.
Blast furnace Created 2026-10-31 Updated 2026-11-05
A blast furnace is a shaft furnace in which a descending solid charge encounters rising hot gases. In iron extraction, the charge includes iron ore, coke and a flux such as limestone. The products include molten pig iron and slag, which separates from the metallic liquid.[ref]
Steel Production by the American Iron and Steel Institute. How Steel Is Made: blast-furnace feed and pig-iron output
The gases supply both heat and a reducing environment. A simplified iron oxide reduction isHere carbon monoxide removes oxygen from the iron oxide and becomes carbon dioxide. The opposing flows allow rising gases to heat and react with incoming material before leaving the furnace: countercurrent flow helps recover energy within the process. The pig iron contains substantial carbon and requires further refining for most steelmaking.
Calcium silicate 2026-10-31
Electric arc furnace 2026-11-05
An electric arc furnace supplies heat through an electric arc between electrodes and the charge or molten bath. In steelmaking, it melts and refines material that can include recycled steel and direct reduced iron. It provides a different heating route from the internal oxidation heat central to basic oxygen steelmaking.[ref]
Steel Production by the American Iron and Steel Institute. Electric-arc furnace route and feedstocks
The electrical input does not by itself determine the product's chemical composition. The charge, additives, slag and refining reactions must also be controlled. Similarly, the route's carbon dioxide emissions depend on how its electricity and metallic feed were produced; melting scrap and reducing fresh iron ore are different system boundaries.
Extractive metallurgy 2026-11-05
Extractive metallurgy develops processes for separating useful metals from ores and refining them to a required purity. A process may combine physical concentration, high-temperature reactions, dissolution and electrochemical recovery. The appropriate route depends on the mineral's chemical composition, the metal's reactivity and the fate of unwanted constituents.
For iron extraction, an iron oxide must lose oxygen. In a simplified reaction, , carbon monoxide is the reducing agent. Separating the resulting iron from slag and controlling remaining impurities are further tasks. Extraction is therefore a sequence of reaction and separation steps, rather than just melting the original rock.[ref]
Steel Production by the American Iron and Steel Institute. Blast-furnace reduction and pig-iron output
Steel is an iron-based alloy with controlled carbon content and impurities; its manufacture requires extracting iron from an ore and then adjusting the composition. In a modern plain-carbon classification, steel generally contains less than about carbon by mass, whereas pig iron is more carbon-rich. The historical practical contrast was with low-carbon wrought iron and readily cast but relatively brittle cast iron. Hardening by quenching is characteristic of suitable carbon-rich steels, but not every grade hardens in the same way.
Begin, for example, with an iron oxide ore. Preparation removes some earthy matter and, where appropriate, roasting expels moisture or converts a carbonate-bearing ore to oxide. A blast furnace receives the ore, coke and a flux such as limestone. The hot air blast sustains combustion of coke, generating heat and the carbon monoxide needed for much of the oxide reduction. Representative overall balances areCalcination of limestone provides calcium oxide. Combination with acidic gangue, represented by silica, gives a liquid slag:Actual slag is a multicomponent melt, rather than necessarily pure calcium silicate. The descending iron picks up carbon and other impurities and collects as molten pig iron. This first extraction product is not already finished steel.
Two important routes available in 1867 proceed from this stage. In the older indirect route, refining and puddling oxidize much of the carbon and remove slag-associated impurities to obtain wrought iron. Bars packed with charcoal are then heated for a prolonged period in the cementation process. Carbon enters the bars, giving blister steel; forging and welding can make shear steel, while melting suitable stock in covered crucibles produces more uniform crucible steel. The bar can acquire carbon through gas-mediated surface reactions and diffusion; the process should not be imagined as intact charcoal grains travelling through the iron.
In the Bessemer process, an air blast passes through molten pig iron in a converter. Oxidation of silicon, manganese and carbon supplies heat, while lowering the carbon content. Composition can be corrected by adding a controlled carbon- and manganese-bearing material such as spiegeleisen. Henry Bessemer's 1856 patent describes the central idea of maintaining the conversion by oxidizing constituents of the molten metal, without fuel for reheating during that stage.[ref]
Improvement in the manufacture of iron and steel by Henry Bessemer. US16082A, specification and final claim, 11 November 1856
The early acidic converter demanded suitable feed: it did not solve removal of phosphorus from every ore. Later basic converter practice must not be silently imported into a December 1867 account. Final casting, working and heat treatment determine the steel microstructure and properties as well as composition. The useful manufacturing chain is therefore ore → extracted carbon-rich iron → controlled composition → worked and appropriately heat-treated steel.