Blast furnace Created 2026-10-31 Updated 2026-11-05
A blast furnace is a shaft furnace in which a descending solid charge encounters rising hot gases. In iron extraction, the charge includes iron ore, coke and a flux such as limestone. The products include molten pig iron and slag, which separates from the metallic liquid.[ref]
Steel Production by the American Iron and Steel Institute. How Steel Is Made: blast-furnace feed and pig-iron output
The gases supply both heat and a reducing environment. A simplified iron oxide reduction isHere carbon monoxide removes oxygen from the iron oxide and becomes carbon dioxide. The opposing flows allow rising gases to heat and react with incoming material before leaving the furnace: countercurrent flow helps recover energy within the process. The pig iron contains substantial carbon and requires further refining for most steelmaking.
Direct reduced iron 2026-11-05
Direct reduced iron is metallic iron produced by removing chemically bound oxygen from iron ore without melting the iron. Its porous structure gives rise to the name sponge iron. Gas-based processes can use hydrogen and carbon monoxide as reducing agents; the product can subsequently be melted during steelmaking.[ref]
Direct Reduced Iron by Midrex Technologies. Process developer, solid-state oxygen removal and steelmaking feed
For the idealized hydrogen reaction , the removed oxygen leaves in water. This reaction changes the direct chemical product relative to a carbon-based reduction, but the full environmental comparison also depends on how the hydrogen, process heat and electricity are supplied. Solid-state reduction and final steel melting remain distinct operations.
Electric arc furnace 2026-11-05
An electric arc furnace supplies heat through an electric arc between electrodes and the charge or molten bath. In steelmaking, it melts and refines material that can include recycled steel and direct reduced iron. It provides a different heating route from the internal oxidation heat central to basic oxygen steelmaking.[ref]
Steel Production by the American Iron and Steel Institute. Electric-arc furnace route and feedstocks
The electrical input does not by itself determine the product's chemical composition. The charge, additives, slag and refining reactions must also be controlled. Similarly, the route's carbon dioxide emissions depend on how its electricity and metallic feed were produced; melting scrap and reducing fresh iron ore are different system boundaries.
Metallurgy Created 2026-10-31 Updated 2026-11-05
Metallurgy studies how to obtain metals from their source materials and control their chemical composition, microstructure and useful properties. Extractive metallurgy deals with separating and refining metals; physical metallurgy connects their internal structure to properties such as mechanical strength, ductility and electrical conductivity.
Steelmaking illustrates the connection between chemistry and materials science: removing oxygen from an iron oxide produces iron, controlling its carbon content produces different steels, and subsequent heat treatment changes the arrangement of crystal structures and hence the mechanical properties. Two samples with similar overall chemical composition can therefore behave differently because their microstructures differ.[ref]
Steel Production by the American Iron and Steel Institute. How Steel Is Made: ironmaking and steelmaking routes
[ref]Properties of Heat Treated Steel by Massachusetts Institute of Technology. Introduction and experimental motivation: heat treatment and steel properties
Steelmaking Created 2026-10-31 Updated 2026-11-05
Steelmaking produces steel by controlling the carbon content, other alloying elements and unwanted constituents of iron. A blast furnace first produces carbon-rich pig iron; a basic oxygen furnace then refines the molten material by oxidation and composition adjustment. An electric arc furnace instead supplies heat electrically to melt a charge that can include recycled steel, direct reduced iron and pig iron.[ref]
The distinction between iron extraction and steelmaking matters: converting an iron oxide to metallic iron and adjusting an existing iron-based alloy to the required composition are different tasks. The Bessemer process is an important historical example of refining pig iron by an air blast; modern basic oxygen steelmaking uses an oxygen supply rather than ordinary air.