 Solution

A wave propagates an organized disturbance through space. What oscillates depends on the medium: displacement in a string or solid, pressure and density in a fluid, electric fields and magnetic fields in an electromagnetic wave, or a quantum wavefunction. The propagation law follows from the restoring mechanism, inertia and relevant boundary conditions. A common linear equation is $u_{tt}=c^2{\nabla }^{2}u$, whose plane waves obey $\omega =c|\mathbf{k}|$. The resulting phase velocity and group velocity coincide, so a narrow wave packet can travel without dispersive spreading. More generally the material supplies a dispersion relation $\omega (\mathbf{k})$; the envelope velocity is ${\nabla }_{\mathbf{k}}\omega$, while constant phase surfaces move at the corresponding phase velocity.

Mechanical waves make the balance of restoring force and inertia particularly visible. A flexible stretched string has $c=\sqrt{T/\mu }$: greater tension stiffens the string, whereas greater linear mass density slows its transverse motion. Small-amplitude acoustic waves in a uniform fluid are longitudinal, with $c_s=\sqrt{K_s/\rho }$, where $K_s$ is the adiabatic bulk modulus. For an ideal gas, $c_s=\sqrt{\gamma p/\rho }$. Pressure changes in rapid sound oscillations are approximately adiabatic because little heat crosses a wavelength in one period. Fluids do not support ordinary bulk shear waves, whereas an elastic solid supports both longitudinal and transverse waves. In an isotropic solid their speeds are $c_L=\sqrt{(K+4G/3)/\rho }$ and $c_T=\sqrt{G/\rho }$, where $G$ is the shear modulus.

A material can be dispersive even when its equilibrium properties are uniform. In a liquid with a free surface, gravity and surface tension act as restoring mechanisms. A simple inviscid capillary-gravity wave haswhere $h$ is depth and ${\gamma }_s$ is surface tension. Long shallow gravity waves have approximately constant speed $\sqrt{gh}$; deep-water gravity waves have $\omega =\sqrt{gk}$ and group velocity half their phase velocity. Short capillary waves have a different dispersion dominated by surface tension. Bending stiffness similarly changes short-wavelength propagation in a string or plate, giving a contribution proportional to $k^4$ in ${\omega }^2$. Different restoring mechanisms can therefore control different wavelength ranges of the same medium.

Electromagnetic waves propagate in vacuum without material displacement, because Maxwell equations couple changing electric and magnetic fields. They are transverse and travel at $c=1/\sqrt{{ϵ}_0{\mu }_0}$. In a simple transparent isotropic material, the phase speed is $1/\sqrt{ϵ\mu }=c/n$, where $n$ is the refractive index. Real material polarization depends on frequency. A Lorentz oscillator model for bound charges explains why permittivity and refractive index become strongly frequency dependent near material resonances, accompanied by absorption. In a birefringent medium, different field polarizations have different propagation constants, permitting wave plates and mode-dependent delays. A electrical conductor additionally supports dissipative currents; its complex wavenumber gives attenuation and, for a good conductor, a skin depth approximately $\sqrt{2/(\mu \sigma \omega )}$. Energy removed from the wave becomes heat rather than disappearing.

At an interface, frequency is conserved for stationary media, and tangential wave phase must match. These conditions give Snell's law for refraction and constrain reflected and transmitted directions. Amplitudes follow from continuity of the appropriate fields or mechanical forces. On strings the relevant mechanical impedance is $\sqrt{T\mu }$; for sound it is related to $\rho c_s$, and for electromagnetic waves to $\sqrt{\mu /ϵ}$. A mismatch gives wave reflection, and a lossless boundary conserves the total incident, reflected and transmitted power. Multiple reflections can reinforce or cancel, as in a Fabry–Pérot etalon. Total internal reflection and other boundary conditions confine waves in waveguides. Transverse modes then become discrete, and even an otherwise nondispersive material develops longitudinal cutoffs and wave dispersion. A membrane strip, for example, obeys ${\omega }_n^2=c_m^2[k^2+(n\pi /a{)}^2]$.

Propagation also involves transport and loss. The Poynting vector gives electromagnetic energy flux; mechanical energy transport is force or pressure times velocity, averaged over a cycle. Wave absorption, viscosity, electrical resistance and imperfect boundaries dissipate energy. Scattering redistributes energy into other directions and modes, while geometric spreading reduces local intensity without necessarily dissipating anything. These mechanisms should be distinguished when interpreting a decreasing measured amplitude. In strongly absorbing or rapidly varying dispersive regimes, the derivative called group velocity is not automatically the speed of a sharp signal front; pulse reshaping and the medium's causal response must be considered.

Finally, quantum matter waves illustrate how the same propagation mathematics can describe a different physical quantity. For a free nonrelativistic particle, $\omega =\hslash k^2/(2m)$, so the group velocity $\hslash k/m$ equals its particle velocity and differs from the phase speed $\hslash k/(2m)$. In a periodic crystal, Bloch's theorem replaces the free dispersion by energy bands. Their slope controls wave-packet velocity, $v_g={\hslash }^{-1}dE/dk$, and their curvature gives band effective mass. Thus mechanical confinement, material response and microscopic periodicity all reshape propagation through their allowed modes and dispersion, while the physical interpretation of the wave and its transported quantities remains essential.