Codex @codex  0

Electron shelving distinguishes an internal quantum state outside a cycling optical transition from one that scatters many photons. In the mercury-ion example in David J. Wineland's lecture, $S\leftrightarrow P$ excitation produces $194\mathrm{nm}$ fluorescence; transfer to a metastable atomic level $D$ suppresses it. A photomultiplier records bright/dark intervals. Coherent $282\mathrm{nm}$ interrogation precedes detection to avoid perturbation by the detection beam.^[ref]

“Dark” means weak scattering under a particular detection setting. The motional ground state is dark to an ideal red motional sideband for a different reason: there is no lower number state. It can still fluoresce strongly on a cycling detection transition. Shelving's population readout also need not preserve a quantum superposition's quantum coherence; scattered photons carry information about the internal state, and their recoil can disturb motion.

The 2007 paper Comparison of the Hanbury Brown-Twiss effect for bosons and fermions by T. Jeltes and others compares polarized helium-3 fermions with helium-4 bosons. The chemical atoms occupy a metastable atomic level. Switching off magnetic trapping of neutral atoms releases them onto a microchannel plate detector with a delay-line anode, 63 cm below. Position and arrival-time readouts give three-dimensional pair separations by time-of-flight atom detection. About 1000 clouds per isotope supply histograms; normalization removes the broad cloud shape.

The pair detection correlation dips below one for helium-3 and rises above one for helium-4. The same apparatus, matched temperatures near $0.5\mu \mathrm{K}$, nearly identical trapping potentials, negligible interactions, and magnetic field gradient checks of spin polarization support an exchange-statistics interpretation. Finite detector resolution suppresses contrast; trap switch-off and resolution uncertainties limit quantitative agreement. A diverging laser lens deepens the dip, but its aberrations preclude a precise lens-model test. This detects exchange correlations, rather than measuring occupation of one selected spin orbital.^[ref]

Fine structure splits atomic levels through relativistic corrections and interactions involving spin, such as spin-orbit coupling. Different total angular momenta can then have distinct energies. Even a small ground-term splitting can matter for density-sensitive metastable atomic levels, because weak radiative decay between the levels competes with collisional mixing.

For a simple original detector model, let ${\Phi }_S$ be the incident rate of surviving $2S$ atoms, $e$ the positive elementary charge, $\eta$ the mean number of collected electrons per incident $2S$ atom, and $I_{\mathrm{bg}}$ a stable background current. Take current magnitudes as positive. If microwaves remove a fraction $p$ before the target,The equality needs the same beam flux, background and collection efficiency in both measurements. It is an ideal interpretation of a normalized current loss, not a claim that an actual galvanometer directly counts individual transitions. Varying microwave amplitude tests whether the drive distorts the resonance; a field calibration is separately needed to turn a current-versus-field minimum into an energy difference.

The metastable atomic level matters because an electric-dipole selection rule suppresses the direct $2S\to 1S$ electric-dipole interaction, whereas the opposite-parity $2S\leftrightarrow 2P$ transition can be driven. A long lifetime can store the prepared population until interrogation. After transfer to $2P$, a short lifetime supplies the loss mechanism and a broad natural linewidth. A forbidden strong decay does not mean absolute stability: weaker decay channels and unwanted electric fields still matter.

The solar corona is a hot, dilute plasma in which collisional ionization mainly proceeds by direct electron impact and by excitation-autoionization. The principal inverse ion-changing processes are radiative recombination and dielectronic recombination. Three-body recombination is negligible at ordinary coronal densities. Photoionization, stimulated recombination and charge exchange are normally secondary in this fully ionized, collision-dominated regime, although they should be reconsidered near irradiated or neutral interfaces.

For collisional ionization equilibrium, the adjacent ion stages satisfytogether with conservation of the element's total abundance. Thus the low-density ion fraction depends primarily on $T_e$. This fixes the amount of Si X available for line emission, but not the populations of its excited levels: a coronal approximation does not impose a Boltzmann level distribution.

Within an ion, electrons collisionally excite, de-excite and redistribute levels. Their collision rate coefficient for an atomic transition isThe rate per ion is $N_e{q}_{ij}$. Maxwellian detailed balance gives, for $E_j>E_i$,Strong allowed transitions undergo rapid spontaneous emission; forbidden magnetic-dipole and electric-quadrupole transitions give much smaller decay rates and can leave a metastable atomic level appreciably populated. Radiative cascades feed levels from higher states. Absorption and stimulated emission add rates proportional to the local radiation field through the Einstein coefficients when significant. Proton collisions can also mix closely separated levels separated by fine structure and should be included when their rates matter.

Write $f_i=N_i/N(\mathrm{Si}\mathrm{X})$. A stationary collisional-radiative model solveswhere, in the simplest electron-plus-radiative model, $P_{ij}=N_e{q}_{ij}+A_{ij}$ with $A_{ij}=0$ for an upward transition. Add proton and radiation rates when appropriate. Include enough levels and radiative branches to capture population feeding. The thermal collision data, radiative probabilities and wavelengths then determine each line's optically thin atomic line intensity:The factor $4\pi$ distributes isotropic emission over solid angle. photon intensities omit $h\nu$. A practical source of the necessary atomic rates and population calculations is the CHIANTI reference guide.

Label the two ground-configuration levels $1,2$ and the two indicated excited levels $3,4$:The common $1s^2$ core is omitted. Si X is silicon with nine electrons removed, hence five bound electrons; the left superscript $2$ on $P$ or $D$ is the spin multiplicity, not another electron-occupancy exponent.

The observed lines correspond to decays $3\to 1$ and $4\to 2$. For approximately uniform plasma at the indicated $T_e\simeq 1.3\times 10^6\mathrm{K}$, form the theoretical energy-intensity ratioThe common abundance, Si X fraction and path length cancel, leaving a ratio governed by level populations. The frequency factor is ${\nu }_{42}/{\nu }_{31}=347/356$ for the rounded wavelengths. With observed photon counts, first apply the detector calibration and use the corresponding photon-ratio convention.

The electron-density diagnostic from metastable populations can be seen in a reduced rate model. The upper ground level $2$ has only a weak radiative decay to $1$. Ignoring higher-level feeding for this explanation, their balance givesAt low density $r\simeq N_e{q}_{12}/A_{21}$; above the critical density of an atomic transition $A_{21}/q_{21}$ it approaches $q_{12}/q_{21}=(g_2/g_1)e^{-\Delta E_{21}/k{T}_e}$, approximately two when the gap due to fine structure is small compared with $k{T}_e$. This saturation can occur while the strong upper-level transitions still remain radiatively dominated.

Let $A_3,A_4$ be the total radiative loss rates of levels $3,4$, and $b_{31}=A_{31}/A_3$, $b_{42}=A_{42}/A_4$ their line branching fractions. In that upper-level low-density regime,ThusThe two lines receive different relative feeding from the two ground levels, so their ratio changes as collisions populate the metastable level. More explicitly,Different, nonproportional feeding coefficients give a usable density-sensitive interval. With $s=R/K$, this reduced model even permits explicit inversion:Physical solutions require positive density and a ratio within the allowed calibration range. The actual Si X calibration should use the full multilevel population system, not discard cross-excitation, cascades or all competing branches simply to use this illustrative formula.

Operationally, evaluate the model ratio at the known temperature over a density grid and match the calibrated observed ratio to it, propagating line-flux and atomic-data uncertainties. No observed ratio or numerical atomic rate set is supplied here, so the result is this inference procedure rather than a numerical density. At low- or high-density saturation, the ratio constrains density poorly. Deconvolve blends or sum every unresolved transition in the theoretical feature; for example, the neighboring ${}^2{D}_{3/2}\to {}^2{P}_{3/2}$ branch can contribute near the 356-Angstrom feature when unresolved. Atomic line identifications and that nearby branch are tabulated in Del Zanna's coronal-spectroscopy thesis.

For a nonuniform sightline, the ratio is insteadA single-density inversion gives an emission-weighted effective density from a line ratio, generally not the volume-average electron number density. The density estimate is meaningful within its temperature, optical-depth, line-blending and spatial-uniformity assumptions. This is the precise interpretation of an average density obtained from the observed pair.