Past exam of the physics B course of the University of Cambridge / 2011 / Paper 1 / Section C / C12 / Solution

In the Carnot cycle, let $1\to 2$ be reversible isothermal expansion at $T_h$, $2\to 3$ reversible adiabatic expansion, $3\to 4$ isothermal compression at $T_c$, and $4\to 1$ adiabatic compression. The pressure–volume curve is clockwise. The entropy–temperature figure below uses temperature on the horizontal axis and entropy on the vertical axis, literally an $S$–$T$ plot: isotherms are vertical and adiabats horizontal. The hot isotherm increases entropy by $\Delta S$ and absorbs $Q_h=T_h\Delta S$; the cold one rejects $Q_c=T_c\Delta S$. Thus $W=(T_h-T_c)\Delta S$ and ${\eta }_C=1-T_c/T_h$.

For the second engine, choose the working direction with heat addition during $A\to B$ at $p_1$ and rejection during $C\to D$ at $p_2$. A reversible ideal-gas adiabat obeys $T\propto p^{(\gamma -1)/\gamma }$. DefineThe two constant-pressure heat transfers are $Q_{\mathrm{in}}=c_p(T_B-T_A)$ and $Q_{\mathrm{out}}=c_p(T_C-T_D)=Q_{\mathrm{in}}/r$, where rejected heat is quoted positive. Therefore the Brayton cycle efficiency isfor $\gamma =5/3$. All heat-capacity amount conventions cancel in the ratio.

Since $T_B>T_A$ and $T_C=T_B/r$, $T_D=T_A/r$, the maximum is at B and the minimum at D. The Brayton-Carnot efficiency comparison isThe inequality is strict for a nondegenerate cycle with positive heat input. Although each process can be reversible, the isobaric heat transfer spans a range of temperatures; making the whole cycle reversible requires a succession of matched-temperature reservoirs, rather than just the hottest and coldest reservoirs.

For an ideal diatomic gas with active rotation and frozen vibration, $\gamma =7/5$ andHere $0<p_2/p_1<1$. This comparison holds at the same pressure ratio and assumes temperature-independent heat capacities in the stated mode regime. Frozen rotation or excited vibration would require their actual heat capacities.