Past exam of the physics B course of the University of Cambridge / 2015 / Paper 2 / Section B / B8

A torque-free rigid body has constant angular momentum $\mathbf{L}$ in inertial space. Its angular velocity need not be parallel to $\mathbf{L}$, because $\mathbf{L}=\mathbf{I}\mathbf{\omega }$. In body principal axes, Euler equations for a torque-free rigid body areFor a symmetric top $I_1=I_2=I_{\perp }$, $I_3=I_{\parallel }$, the component ${\omega }_3$ is constant andThis is the signed rotation frequency of the transverse angular-velocity components in the body frame. In space the symmetry axis instead obeysIts angle to $\mathbf{L}$ is constant, with $\cos \theta =I_{\parallel }{\omega }_3/L$. The body-frame and space-frame frequencies of free symmetric-top precession describe different frames. A spherical body has $\mathbf{\omega }\parallel \mathbf{L}$ and no corresponding wobble. For a triaxial body, rotations about the largest and smallest principal-inertia axes are stable, whereas rotation about the intermediate axis is unstable.^[ref]

For generalized coordinates $q_i$ with Lagrangian $L(q,\dot{q},t)$, the conjugate momentum isA coordinate absent from $L$ is cyclic, and its conjugate momentum is conserved. More generally, Noether's theorem connects continuous symmetries of the action to conserved quantities: spatial translations give linear momentum and rotations give angular momentum. If $L$ has no explicit time dependence, the conserved energy function isThe momentum conjugate to an angle is an angular momentum, not a linear velocity. Canonical momentum can also differ from mechanical momentum: for $L=\frac{1}{2}m{v}^2+q\mathbf{A}\cdot \mathbf{v}-q\varphi$, $\mathbf{p}=m\mathbf{v}+q\mathbf{A}$. Thus a conserved conjugate momentum must be identified from the actual Lagrangian and its symmetry, rather than assumed to equal $m\mathbf{v}$. Gauge-dependent canonical momenta require the corresponding gauge choice or gauge-covariant symmetry interpretation.^[ref]

For positions measured from the chosen origin, the inertia tensor isIt relates angular momentum and rotational kinetic energy to angular velocity:The real symmetric tensor has orthogonal principal axes, in which $\mathbf{I}=\mathrm{diag}(I_1,I_2,I_3)$. Its eigenvalues are nonnegative moments of inertia. Rotation about a principal axis has $\mathbf{L}\parallel \mathbf{\omega }$; a general rotation does not. The moment about a unit axis $\mathbf{n}$ is $I_{\mathbf{n}}=\mathbf{n}\cdot \mathbf{In}$.

Changing from the centre of mass to a parallel origin displaced by $\mathbf{a}$ gives the tensor parallel-axis theorem,For example, a uniform solid sphere has $\mathbf{I}=(2M{R}^2/5)1$, while a thin rod along $x$ has principal moments $0,M{l}^2/12,M{l}^2/12$ in the ideal zero-radius limit. The tensor is needed to describe off-axis rotation and torque-free precession; a single scalar inertia only suffices after an axis is specified.^[ref]

For steady, inviscid, incompressible flow, Euler's equation integrated along a streamline givesThis is Bernoulli's equation. The constant is common to different streamlines if the flow is also irrotational; incompressibility alone does not imply that. Viscous loss or work by a pump requires additional terms.

A Pitot-static tube compares stagnation pressure $p_0$ at a forward-facing opening with nearby static pressure $p$. For equal height, the stagnation point has $v=0$, soThis measures flow speed when compressibility corrections are negligible.

In a flowmeter using the Venturi effect, continuity gives $A_1{v}_1=A_2{v}_2$. For a horizontal constriction with $A_2<A_1$, Bernoulli gives $p_1-p_2=\rho (v_2^2-v_1^2)/2$, henceThe fluid accelerates and static pressure falls in the throat. This is a second practical application of the conversion between pressure and kinetic energy; real instruments need calibration for flow losses.