Past exam of the physics B course of the University of Cambridge / 2016 / Paper 2 / Section B / B6

An electric dipole consists of equal and opposite electric charges separated by a displacement $\mathbf{d}$. Its electric dipole moment is $\mathbf{p}=q\mathbf{d}$, directed from negative to positive electric charge. At distances large compared with the separation, its leading electric potential and electric field areThere is no monopole term because the net electric charge is zero. The axial electric field points along $\mathbf{p}$ with magnitude $2p/(4\pi {ϵ}_0{r}^3)$, while the equatorial electric field points oppositely with half that magnitude.

A uniform applied electric field exerts zero net force on an ideal fixed electric dipole, but it exerts torque $\mathbf{\tau }=\mathbf{p}\times \mathbf{E}$. Its orientation-dependent potential energy is $U=-\mathbf{p}\cdot \mathbf{E}$, so alignment with the electric field is stable. A nonuniform applied electric field can also exert a net force, $\mathbf{F}=\nabla (\mathbf{p}\cdot \mathbf{E})$ for a fixed permanent electric dipole moment.

A permanent electric dipole moment exists without an applied electric field. An induced electric dipole moment instead develops in response to the local electric field; in an isotropic linear model $\mathbf{p}=\alpha \mathbf{E}$. Creating that induced moment requires accounting for the work of polarization, so its mechanical potential energy in a specified applied electric field is $-\alpha E^2/2$, rather than $-\alpha E^2$. In matter, the dipole moment per unit volume is the polarization density $\mathbf{P}$.

Mutual inductance expresses how a changing electric current in one circuit induces an electromotive force in another. Choose winding orientations and define their linked magnetic fluxes byFor a reciprocal linear magnetic system, the same $M$ appears in both expressions. Faraday's law of induction gives ${\mathcal{E}}_2=-Md{I}_1/dt$ when the secondary electric current does not itself change. The sign depends on winding orientation and is consistent with Lenz's law.

The stored magnetic energy isIts nonnegativity for arbitrary electric currents requires $M^2\le L_1{L}_2$. Strong coupling makes $|M|$ approach $\sqrt{L_1{L}_2}$; flux leakage makes it smaller.

An ideal electrical transformer has two windings linked by the same time-varying core magnetic flux. The induced winding voltages are proportional to their turn counts. For appropriately chosen terminal polarities,The electric current convention in the power relation takes primary power into the device and secondary power out to the load. Consequently a load electrical impedance $Z_L$ appears at the primary as $Z_{\mathrm{in}}=(N_1/N_2{)}^2{Z}_L$. A larger secondary voltage therefore comes with a smaller available secondary electric current, rather than extra energy.

A steady direct electric current produces no sustained transformer action after its switching transient. Practical departures from the ideal include winding electrical resistance, leakage magnetic flux, finite magnetizing electric current, core saturation, eddy currents and magnetic hysteresis losses.

Free charge is charge assigned to externally supplied or mobile carriers in a macroscopic description. Bound charge describes the net charge associated with a material's polarization density $\mathbf{P}$. Its bulk and surface densities arewhere the normal points out of the polarized material. Uniform bulk polarization density has no bulk bound charge, but it can still have surface bound charge.

The electric field is sourced by the total electric charge. Introducing the electric displacement field separates the free source in the macroscopic field equation:This does not mean that bound charges are physically absent from $\mathbf{D}$: they are represented through $\mathbf{P}$. In a linear isotropic dielectric, $\mathbf{P}={ϵ}_0{\chi }_e\mathbf{E}$ and $\mathbf{D}=ϵ\mathbf{E}$, with $ϵ={ϵ}_0(1+{\chi }_e)$.

Across a stationary ordinary dielectric interface, electrostatics gives continuity of tangential electric field, while a free sheet charge givesThe normal electric field need not be continuous. For a fully filled parallel-plate capacitor at fixed free plate charge, polarization reduces the internal electric field by ${ϵ}_r$ and increases capacitance by the same factor. If a battery instead holds the voltage fixed, extra free plate charge flows from the battery; the constraint must be stated before comparing stored energies.^[ref]

A permanent magnet retains a substantial magnetization without an applied coil electric current. In a ferromagnetic material this reflects microscopic magnetic moments, magnetic domains and their resistance to rearrangement. The history-dependent relation between applied field and magnetization gives magnetic hysteresis, remanence and coercivity. A soft core used in an electromagnet or electrical transformer is chosen for easy magnetization and small hysteretic loss; a permanent-magnet material must resist demagnetization.^[ref]

The macroscopic fields obeyin magnetostatics. The magnetization can be represented by equivalent bound currents,Thus both permanent magnetic matter and free coil electric currents generate a magnetic field. Its magnetic field lines form continuous loops; apparent north and south poles are not isolated magnetic charges.

In a long ideal solenoid, $H\simeq nI$. A linear core would give $B\simeq {\mu }_0{\mu }_{r}nI$, until saturation or other nonlinear effects invalidate a constant magnetic permeability. In a finite magnetic circuit, air gaps and demagnetizing fields affect the field strongly: because the gap has low magnetic permeability, it often needs most of the available magnetomotive force. A permanent magnet can have a nonzero internal $\mathbf{H}$ even when ${\mathbf{J}}_f=0$, because its boundaries create a demagnetizing field. Hence setting $\mathbf{H}=0$ merely because there is no free coil electric current is generally incorrect.