Changes in a material caused by irradiation, including displacement defects, chemical changes and their subsequent microstructural evolution. A nominal dose does not uniquely specify the surviving defect population or final material response.
Yield strength 2026-10-20
A stress characterizing the onset of permanent plastic deformation under a specified test convention. A proof-stress definition is often used when there is no sharp yield point.
Ductility 2026-10-20
Capacity to sustain plastic deformation before fracture. Its measurement and practical significance depend on specimen geometry, stress state, temperature and deformation rate.
Corrosion 2026-10-20
Chemical or electrochemical degradation of a material through interaction with its environment. Protective surface films can reduce the rate, while film breakdown can localize attack.
Hydrogen embrittlement 2026-10-20
Loss of resistance to cracking associated with hydrogen in a material. Mechanisms are material-dependent; brittle hydride precipitation is particularly relevant to zirconium alloys.
Microstructure 2026-10-20
The arrangement of a material's constituents and crystallographic defects at scales relevant to its properties.
Recrystallisation 2026-10-20
Formation and growth of new crystal grains during microstructural recovery, commonly changing dislocation structure and crystallographic texture. It is not identical to recovery without new-grain formation.
Textile linear density 2026-10-20
Mass per unit length of a filament or yarn. The tex unit equals one gram per kilometre, or .
Brazing Created 2026-10-20 Updated 2026-11-05
Joining by a liquid filler metal that wets and fills a gap while the parent pieces remain solid. A filler alloy with a suitable eutectic temperature can provide a lower and narrow melting interval.
Tandem mass spectrometry 2026-10-20
tandem mass spectrometry selects precursor ions, fragments them, and measures the fragments to constrain precursor identity or structure. In proteomics, fragmentation of peptides provides sequence evidence that can be matched against a database.
Native mass spectrometry 2026-10-20
native mass spectrometry transfers intact biomolecular assemblies into the gas phase under conditions intended to preserve noncovalent association sufficiently for mass analysis. Charge-state assignment and possible loss of subunits or bound lipids must be considered when inferring stoichiometry.
co-fractionation mass spectrometry quantifies proteins across fractions from a native separation. Similar elution profiles suggest shared assemblies; coincident migration and assemblies that exchange partners are alternative explanations.
chemical cross-linking mass spectrometry identifies residue pairs joined by a chemical reagent and uses them as spatial constraints on protein structures or assemblies. A distance limit depends on linker chemistry, reactive residue positions and accessible conformations.
hydrogen-deuterium exchange mass spectrometry follows exchange of exchangeable hydrogen with deuterium and measures mass changes, often after digestion into peptides. Protection can reflect hydrogen bonds, burial or restricted structural opening; altered exchange is not uniquely diagnostic of a binding interface.
A combined analytical method separating compounds chromatographically before mass-spectrometric characterization. Peptide identification in a gel region can suggest a protein identity, but comigration requires independent validation of an assigned band.
Gas chromatography-mass spectrometry Created 2026-10-20 Updated 2026-11-05
Gas chromatography-mass spectrometry couples chromatographic separation of volatile analytes with mass analysis of the eluting material. Retention behavior and a mass spectrum provide complementary evidence.
Co-elution can mix signals, and related molecules can share fragments. A library match is therefore evidence interpreted with separation quality, standards, and the measurement method, rather than an automatic unique structural proof.
Elementary excitation Created 2026-10-20 Updated 2026-11-05
An approximately independent low-energy excitation above a many-body equilibrium state, characterized by energy, momentum and other quantum numbers. Collective sound and dressed particle-like excitations are examples; the relevant modes depend on the phase and approximation.
Work by Lake Shore Cryotronics Created 2026-10-20 Updated 2026-11-05
Work by IUPAC Created 2026-10-20 Updated 2026-11-05
Iron regulatory protein 2026-10-20
A protein that binds appropriate iron-responsive elements depending on cellular state. The distinct sensing mechanisms of IRP1 and IRP2 should not be conflated.

There are unlisted articles, also show them or only show them.