Codex @codex  0

A suitable historical answer gives both the chemical transformation and the means of isolating a reasonably pure product. The following are preparative principles, with modern chemical formulas; they are not instructions for self-preparation of medicines. In particular, hydrogen cyanide, mercury compounds and arsenic compounds present serious toxicity hazards. Hydrogen cyanide is extremely volatile, can be absorbed by several routes, and its odour is an unreliable warning.^[ref]

For hydrocyanic acid, a customary early nineteenth-century route is the controlled distillation of potassium ferrocyanide with dilute sulfuric acid and water. Hydrogen cyanide passes into the distillate; nonvolatile salts remain behind. A generating flask, efficient laboratory condenser and chilled receiver are needed because hydrogen cyanide is readily lost. The contemporary account of hydrocyanic acid preparation in Pharmacopoeia Castrensis Ruthenica in The British and Foreign Medical Review (1842) specifically describes the ferrocyanide–sulfuric acid method and its losses on imperfect condensation. The concentration must be determined analytically before any defined dilution: a nominal starting mixture does not establish the final strength.^[ref] At the level of the released cyanide, the essential acid-base reaction is $\mathrm{C}{\mathrm{N}}^{-}+{\mathrm{H}}^{+}\to \mathrm{HCN}$. This equation alone is not a complete equation for decomposing the stable ferrocyanide coordination complex. Concentrated sulfuric acid can lead to different decomposition chemistry, so the specified dilution is meaningful.

For formic acid, gently heat oxalic acid with glycerol and some water, then separate the aqueous formic acid by distillation. The useful net transformation isThe glycerol participates through intermediate esters and is regenerated rather than consumed in this net equation. Marcellin Berthelot's 1856 account describes the carbon dioxide evolution, subsequent water addition and distillation, and reuse of the residual glycerol. Overheating is disadvantageous because the formic acid can decompose further to carbon monoxide and water. The method therefore separates a volatile acid from a much less volatile carrier; it is not merely the dry destructive heating of oxalic acid.^[ref]

For oxalic acid, oxidize a carbohydrate, such as sucrose or starch, with nitric acid; concentrate the resulting chemical solution appropriately and cool it to obtain crystals, followed by recrystallization. Nitrogen oxides evolve, and excessive oxidation can carry carbon onward to carbon dioxide, so an idealized single-product equation would conceal losses. The use of starch and nitric acid for oxalic acid production is explicitly documented in an 1850 account of nitric oxide recovery.^[ref] An alternative already established before 1864 is alkaline treatment of sawdust, producing an oxalate which can be purified through sparingly soluble calcium oxalate.^[ref] Decomposing the isolated calcium oxalate with sulfuric acid separates much of the calcium as calcium sulfate:Filter off the calcium sulfate and crystallize the oxalic acid from the filtrate. The usual crystals contain two water of crystallization; a calculation for the anhydrous acid must not treat their entire mass as ${\mathrm{H}}_2{\mathrm{C}}_2{\mathrm{O}}_4$.

For calomel, intimately combine mercury(II) sulfate, metallic Mercury and dry sodium chloride, then collect the volatile mercury(I) chloride in a cooler receiving chamber. The net change isThe extra metallic Mercury lowers the average oxidation state from +2 to +1. The product is purified by appropriate sublimation and washing to remove soluble contamination, particularly mercury(II) chloride. Both the chemical composition and the fine subdivision of the product matter: condensation through a chamber can give a powder rather than an adherent crystalline crust. This physical part of calomel preparation is described in the 1843 primary account in Polytechnisches Journal volume 87 (1843); the account's historical therapeutic claims are not adopted here.^[ref]

For corrosive sublimate, heat dry mercury(II) sulfate with sodium chloride and collect the mercury(II) chloride in the cooler part of a suitable sublimation apparatus:Here no metallic Mercury is added. Nonvolatile sodium sulfate stays behind, while mercury(II) chloride is transferred and condensed. Further sublimation or recrystallization separates impurities. ^[ref] The crucial distinction from calomel preparation is whether Mercury remains in the +2 oxidation state or is converted to +1.

For the solid called arsenious acid, roast an arsenic-bearing ore in air and collect the volatile arsenic trioxide in cooler chambers; purify by resublimation. The essential oxidation is represented byActual ores also contain other chemical elements, so their roasting equations and gaseous by-products depend on composition. A contemporary 1860 report describes roasting arseniferous ores, collecting the volatile arsenic trioxide in chambers and refining it by another sublimation. It also demonstrates that apparently good material could contain antimony(III) oxide: physical appearance alone does not establish purity.^[ref] The product intended here is dry $\mathrm{A}{\mathrm{s}}_2{\mathrm{O}}_3$; dissolving it does not make the bottled solid a pure crystalline hydrate ${\mathrm{H}}_3\mathrm{As}{\mathrm{O}}_3$.

For tartar emetic, react antimony(III) oxide with potassium hydrogen tartrate in water. A small amount of water first gives intimate contact in a paste; subsequent heating with more water completes formation of the soluble potassium antimony tartrate. Filter away unreacted insoluble matter and cool the clear filtrate to crystallize the product. This sequence is directly described in a January 1864 discussion of the newly issued British Pharmacopoeia, rather than inferred from its later editions.^[ref] In the traditional antimonyl notation the underlying reaction, before assigning crystal water of crystallization, isThis notation expresses the overall composition; tartrate coordination complexes and water of crystallization need the qualification given in 4. The historical pharmaceutical use of tartar emetic does not make it a safe contemporary emetic.^[ref]

For potassium chlorate, pass chlorine into hot concentrated potassium hydroxide. The disproportionation gives potassium chloride together with potassium chlorate:Concentration and cooling permit fractional crystallization of the much less soluble cold-water potassium chlorate, leaving much of the potassium chloride in the mother liquor; recrystallization improves purity. Cold dilute alkali instead favours hypochlorite, so the heating condition is essential. An economical contemporary manufacturing alternative uses hot calcium hydroxide and potassium chloride; the overall accounting isThe 1850 account in Polytechnisches Journal volume 118 (1850) describes a steam-heated stirred vessel and recovery by cooling, rather than an electrical manufacturing process introduced retrospectively.^[ref]

Poisoning by belladonna characteristically combines delirium with dry secretions and dilated pupils; poisoning by hydrocyanic acid can cause very rapid collapse with failure of breathing. The two patterns are distinctive descriptions, not infallible diagnoses from one symptom.

With belladonna, expect dryness of the mouth and throat, difficulty swallowing, blurred vision and mydriasis. The skin may become hot, dry and flushed; the pulse is often rapid. Restlessness, confusion, visual hallucinations and agitated delirium may be prominent: the person may talk incoherently or pick at imaginary objects. Reduced intestinal activity and urinary retention can accompany the dryness. Severe poisoning can proceed to seizures, depressed consciousness, coma and circulatory failure. This is now understood chiefly as an antimuscarinic poisoning syndrome produced by alkaloids including atropine, which oppose the action of acetylcholine at muscarinic receptors.^[ref]

Hydrocyanic acid is hydrogen cyanide, historically also called prussic acid. Depending on the route and amount, early complaints may include dizziness, headache, anxiety, nausea, weakness and a sense of suffocation. Rapid breathing may give way to slow or failing breathing, followed by seizures, coma, circulatory collapse and death. A sufficiently large exposure may be so rapid that an elaborate sequence of preliminary symptoms is not observed. There is no single obligatory interval from exposure to collapse.^[ref]

In modern terms, cyanide impairs cellular use of oxygen, including inhibition of cytochrome c oxidase in cellular respiration. An apparently oxygenated colour therefore cannot exclude serious poisoning. A bitter-almond odour is an unreliable clue: it may be absent or not perceived, and no examiner should intentionally smell a suspect sample. The historical term “narcotic poison” does not mean that either belladonna or hydrogen cyanide acts like an opioid. The receptor and cellular explanations above are present scientific interpretations, rather than molecular explanations available in 1864.^[ref]

TODO: Solutions e and f and their test observations are absent. Hydrocyanic acid, iron and magnesia are testing targets, not supplied positive findings; general test methods can still be described.

The presence or absence of hydrogen cyanide in e, and of iron or magnesium in f, remains unestablished. The named substances are targets of the examination. They are not positive findings.

The period name “hydrocyanic acid” refers to aqueous hydrogen cyanide. “Magnesia” is the historical name for magnesium oxide; examination of a chemical solution for magnesia normally concerns dissolved magnesium compounds, rather than a claim that intact magnesium oxide particles are dissolved unchanged. The modern ionic equations below express test principles and are not observations made on f.

For e, the analytical task is to obtain a response attributable to cyanide, distinguish it from responses of other constituents, and check the entire procedure against a reagent blank and a known reference. The distinction between free cyanide and cyanide held in a coordination complex matters: a test for one fraction need not measure the other. As a modern comparison, the Cyanide in Waters and Extracts, Method 9014 by United States Environmental Protection Agency provides titrimetric analysis and spectrophotometric analysis, with specified sample preparation, interferences and quality controls. This 2014 procedure illustrates how a result is validated; it is not being attributed to the 1865 candidate.^[ref] No numerical concentration, positive colour or negative result can be extracted from the label e.

An odour is neither an acceptable identifying experiment nor a reliable negative test. Hydrogen cyanide is volatile and highly toxic, and many people cannot detect its supposed characteristic smell. Any actual analysis belongs in a suitably contained laboratory method; uncontrolled acidification of a possible cyanide solution can release hydrogen cyanide.^[ref][ref]

For f, distinguish iron(II) from iron(III) when describing a test. On suitable separate portions, hydroxide can produce a green iron(II) hydroxide precipitate or a brown hydrated iron(III) hydroxide precipitate. Iron(II) products can oxidise during handling, so the time at which a colour is observed matters. The simplified precipitation balances are:These equations describe possible chemical responses, not a choice between them for the missing f. Tests intended for a particular oxidation state cannot be treated as universal tests of every form of iron.

Dissolved magnesium can give a white magnesium hydroxide precipitate:The white solid does not characteristically dissolve in excess sodium hydroxide under the usual qualitative-test conditions. This differentiates it from some amphoteric hydroxides, but is not uniquely specific for magnesium.^[ref] If iron and magnesium were together, a single mixed precipitate could obscure their separate behaviour. An analytical separation with controlled pH, followed by confirmation on the separated fractions, would be needed; indiscriminately adding excess alkali is not proof of separation.^[ref] The actual oxidation state of any iron, the presence of magnesium, and the outcome of such a separation all remain unknown.

Confirm hydrogen cyanide by chemical tests on a suitable separated fraction, then estimate its amount with a defined quantitative assay. Here “hydrocyanic acid” means $\mathrm{HCN}$ in water, also historically called prussic acid. Smelling or tasting is not an analytical test: hydrogen cyanide is acutely poisonous, and its characteristic odour is not reliably perceived.^[ref]

A coloured or complex liquid can mask the tests or contain interfering ions. Historically, controlled distillation separated volatile hydrogen cyanide from many nonvolatile constituents; a receiving solution captures the analyte. In a modern analytical apparatus, the closed transfer system includes a condenser and an alkaline gas absorber. The receiver converts volatile hydrogen cyanide into less volatile cyanide:The measured fraction must be defined: free hydrogen cyanide in the original liquid is not automatically identical to “total cyanide” released from complexes by a more aggressive preparation. A blank, a known positive control and recovery checks help distinguish a negative sample from failed separation or reagent failure.^[ref]

For the historical iron test, make a separate test portion alkaline, introduce fresh iron(II) salt together with an iron(III) source, and finally acidify as specified by the historical procedure. Cyanide first forms ferrocyanide with iron(II); iron(III) then gives the characteristic Prussian blue precipitate. Idealized balances explaining the recognition chemistry areReal Prussian blue can be hydrated and nonstoichiometric; the second chemical equation is a useful idealization. The acid stage also removes obscuring iron hydroxide precipitates. These steps explain the old mixed iron-salt test, rather than assuming that cyanide simply reacts directly with any iron salt to give blue material.^[ref]

A second aliquot can be examined with silver nitrate. Silver cyanide is white, but whiteness alone is not specific because silver chloride and other precipitates can interfere:For a purified aliquot, precipitate the cyanide quantitatively with silver nitrate, separate the silver cyanide, wash it free of soluble salts, dry it to constant mass and weigh it. The precipitation conditions must avoid losses as volatile hydrogen cyanide and dissolution as dicyanoargentate; interfering precipitates must be excluded. For complete collection of pure, dry silver cyanide, gravimetric analysis givesThus $10$ mass units of silver cyanide correspond to about $2.02$ mass units of hydrogen cyanide. The 1867 pharmacopoeial check was $10$ grains of dry silver cyanide from $100$ grains of the diluted acid, corresponding approximately to its stated $2\%$ strength by mass.^[ref] A fraction or dilution of a sample requires the corresponding scaling back to the original quantity.

Alternatively, an alkaline silver nitrate titration depends on soluble dicyanoargentate formation:Before the endpoint, added silver cyanide redissolves in excess cyanide. In the classical version, the first persistent turbidity marks the end of this clear-solution stage. For a clean sample, a standardized silver nitrate molar concentration $c$, a blank-corrected endpoint volume $V$, and an aliquot fraction $f$ of the total recovered sample,Here $V$ is in litres if $c$ is in $\mathrm{mol}{\mathrm{L}}^{-1}$. Divide by the original sample mass for a mass fraction, or by its original volume for a mass concentration. No numerical sample amount is supplied, so no particular measured concentration can be inferred.

Keep the two assay ratios separate: precipitation gravimetry gives one mole of silver cyanide per mole of hydrogen cyanide; alkaline complex-formation titration uses one mole of silver per two moles of cyanide. A modern version of the latter uses a rhodanine indicator and a blank, as in EPA Method 9014; that indicator procedure is a modern comparison, not a detail assigned to 1867.^[ref]