Past exam of the laser science and quantum information processing course of the University of Oxford / 2022 / 1

In Q-switching, hold the optical resonator's quality factor low while pumping builds population inversion, then rapidly reduce the loss. The stored excitation produces a large optical gain, the intracavity light intensity grows, and stimulated emission depletes the population inversion until the optical gain falls below the laser threshold. The resulting optical pulse is a transient discharge of stored excitation.

Its duration depends on the high-quality factor photon lifetime, initial population inversion, saturation dynamics and switching time. For example, a simple laser rate equation model iswhere $S$ is intracavity photon number, $N$ is the available inversion in compatible units, $R_p$ is the pump rate and ${\tau }_c$ is the photon lifetime. During the short discharge, pumping and upper-state decay can often be neglected. The build-up and depletion rates determine the width; there is no universal equality between the width and ${\tau }_c$. The initially stored energy and the output coupling also matter. Typical Q-switching produces nanosecond-scale optical pulses.

In mode locking, fixed relative phases between many longitudinal normal modes produce constructive interference during a short part of each optical resonator round trip. The round-trip time sets the repetition period. The available coherent gain bandwidth, the number of locked normal modes, the spectral phase, and residual group velocity dispersion determine the optical pulse duration.

For $M$ consecutive equally weighted normal modes of angular frequency spacing $\Delta \omega$, their wave amplitude sum is proportional toIts central peak has width of order $1/(M\Delta \omega )$, while its repetition period is $2\pi /\Delta \omega$. A transform-limited pulse therefore becomes shorter as more coherent gain bandwidth is used. This mechanism can give picosecond or femtosecond optical pulses: it does not require depletion of the whole stored population inversion during each peak, as Q-switching does. Mode locking generally accesses a much shorter time-bandwidth product scale than the gain-discharge time of Q-switching.

Use the complex electric field convention $e^{-i\omega t}$ and take the locked wave amplitudes $a({\omega }_p)$ to be real and nonnegative after extracting their common phase. Linear superposition givesThe leading factor has unit modulus, so it does not change the light intensity. The triangle inequality bounds the remaining modulus by ${\sum }_{p}a({\omega }_p)$. Consecutive occupied normal modes attain this bound together atThere is also a peak at $t=0$. The electric field obeys $E(t+T)=e^{-i{\omega }_{\mathrm{ce}}T}E(t)$, although the light intensity is periodic.

The carrier-envelope phase specifies where the carrier oscillation lies relative to the maximum of an optical pulse's envelope. With $s=t-t_m$ and $E=F(s)e^{-i{\omega }_{0}s+i{\psi }_m}$, the signed complex-field phase at the envelope maximum is ${\psi }_m$. Consequently,If instead the real electric field is written $F(s)\cos ({\omega }_{0}s+{\varphi }_{\mathrm{CE},m})$, then ${\varphi }_{\mathrm{CE},m}=-{\psi }_m$ and the conventionally quoted slip is ${\varphi }_{\mathrm{slip}}=+2\pi {\omega }_{\mathrm{ce}}/\Delta \omega$. These are the same physical shift with opposite phase definitions.

The carrier-envelope phase matters for few-cycle optical pulses, when the largest instantaneous electric field affects strong-field dynamics, for high harmonic generation, and for stabilizing an optical frequency comb. An ordinary cycle-averaged light intensity measurement does not determine it.

Put $b=\Delta {\omega }_b>0$ and $s=t-t_m$. At the peak time, $e^{-ip\Delta \omega t_m}=1$, so the exact comb sum becomesFor many occupied normal modes, $b\gg \Delta \omega$, replace the sum by an integral with density $1/\Delta \omega$. Setting $x=\omega -{\omega }_0$ and evaluating the Fourier transform of a Gaussian givesThus the isolated-optical pulse approximation hasThe optical pulse has a Gaussian function envelope and no chirp. Its carrier angular frequency is ${\omega }_0$, and its light intensity full width at half maximum is $2\sqrt{2\ln 2}/b$. Successive envelope maxima have different carrier-envelope phases, consistent with b.

Approximation in the printed assertion. A discrete optical frequency comb gives a train, not one exact isolated Gaussian pulse. Applying the Poisson summation formula to the ideal sum over all integers instead givesNear $t_m$, the $j=m$ term dominates when $bT\gg 1$. The other terms are exponentially small but not identically zero. A single Gaussian function used globally would decay between $0$ and $T$, whereas the exact light intensity has equal maxima there; this supplies a concrete reason the isolated form cannot be an exact global identity. The extension to negative frequencies is the usual narrow-positive-band analytic-field approximation when ${\omega }_0\gg b$.

In second-harmonic generation, the quadratic nonlinear polarization contains products of pairs of comb components. Their angular frequencies areincluding $2{\omega }_p$ when $p=q$. Original comb components have angular frequencies ${\omega }_r={\omega }_{\mathrm{ce}}+r\Delta \omega$, henceWhen the doubled low-frequency region overlaps the original high-frequency region, choosing $r=p+q$ gives the beat at $|{\omega }_{\mathrm{ce}}|$. More generally the nearest positive beat has angular frequencywhich is $|{\omega }_{\mathrm{ce}}|$ for the stipulated small offset. For $0\le {\omega }_{\mathrm{ce}}<\Delta \omega$ it is $\min ({\omega }_{\mathrm{ce}},\Delta \omega -{\omega }_{\mathrm{ce}})$, provided the corresponding teeth are in the overlap.

In comb self-referencing, overlap the doubled red part and the original blue part on a photodiode. The beat measures the carrier-envelope offset frequency. Feedback on an intracavity dispersion control or pump setting can set ${\omega }_{\mathrm{ce}}=0$ modulo $\Delta \omega$, giving $\boxed{{\varphi }_{\mathrm{slip}}=0(\mathrm{mod}2\pi )}$. A phase-sensitive lock or calibrated approach to zero resolves the sign ambiguity of an unsigned beat measurement.^[ref]

The coherent optical spectrum must span an octave, ${\omega }_{\max }\gtrsim 2{\omega }_{\min }$, with sufficient overlapping spectral strength after second-harmonic generation. This calls for very short broadband optical pulses, or coherent external spectral broadening. The two branches must preserve optical coherence, overlap in time and polarization, and have adequate phase matching; bandwidth alone does not guarantee a detectable beat.