For a circular Kepler orbit, remains an exact solution of the averaged Poynting–Robertson drag equations, and . Integrating gives , so the point-star inspiral time under Poynting–Robertson drag is
For a star of radius , contact occurs instead at within this model. Sublimation or other forces can remove a real grain earlier.
Parameterize the trajectory by the decreasing orbital eccentricity. The Poynting–Robertson drag invariant gives
For , . Initially , and the orbit moves almost vertically down a plot of against : the apocentre distance shrinks rapidly while the pericentre distance changes little. Integrating the high-eccentricity slope gives
Once the orbit has moderate orbital eccentricity, both distances change appreciably. For example gives and in the limit. Eventually , , and the trajectory approaches the diagonal before reaching the origin. Thus the two approximate phases are apocentre contraction at nearly fixed pericentre, followed by nearly circular inward migration. They are a smooth crossover, not two separate exact solutions.
Figure 1. . The full apsidal trajectory and a magnified view of its late evolution for an initial apocentre one hundred times the initial pericentre. Details.
Using and , differentiate each apsidal distance. The apsidal evolution under Poynting–Robertson drag is
Both the pericentre distance and apocentre distance decrease. Since and , the same rates are
Their ratio is
In particular gives , whereas the circular limit gives slope .
For , differentiate the logarithm of the proposed Poynting–Robertson drag invariant:
Substitution of the orbit-averaged Poynting–Robertson drag rates gives, over the common denominator , the numerator . Hence
Equivalently, eliminating time gives , whose integral is . An exactly circular orbit remains circular; the expression for is singular at and is replaced by that separate solution.
Exclude collisions from the ejection count. The effective collision width is , while the favorable noncolliding ejection width is . Define the first flyby-ejection threshold and the equal-rate crossover by
There are no direct noncolliding ejections in this weak-deflection model for . Above that threshold, comparison of the two rates gives collision is more likely for , while ejection is more likely for . In the deep-crossing limit , so its scaling at fixed density is . Order-one factors depend on encounter geometry; the robust condition compares with .
Adding the mutually exclusive rare-event loss rates gives the collision-ejection lifetime of a comet:
For this is . For it approaches . A logarithmic sketch therefore bends from slope to slope , with no maximum. At the equal-rate crossover the lifetime is half either individual loss time.
Figure 1. . The mutually exclusive collision and flyby-ejection times and their combined lifetime, scaled to the equal-rate crossover. Details.
These asymptotic branches use the corrected residence density from part iii and require and a local encounter scale below the Hill radius. They cannot be extrapolated indefinitely to arbitrarily distant weakly bound orbits.
In a planetary gravitational assist, the incoming and outgoing relative speeds have the same magnitude. If is the planet-frame velocity, the heliocentric specific orbital energy change is consequently
not an arbitrary addition of to the heliocentric speed. The initial binding energy per unit mass is .
For a weak deflection, , the hyperbolic scattering formula gives . Its direction is perpendicular to the incoming relative velocity. At the planet, in the near-parabolic prograde limit,
On the favorable side of the planet the energy gain is approximately . Equating this to the binding energy gives the ejection impact parameter
Only one sign of impact parameter gains energy for each radial branch. Noncolliding ejections have , giving width , where . For , the planetary ejection of a comet rate is approximately . With this gives
The scaling applies when so that the local two-body encounter and weak-deflection approximations are consistent. The favorable-side coefficient assumes a coplanar orbit; averaging over other encounter geometries changes it. Cumulative diffusion by many subthreshold encounters is not included in this one-encounter estimate.
Suppose the inclined population samples its arguments of periapsis and nodal orientations, or that sufficiently slow precession supplies this sampling. Near the planet the vertical amplitude is . For uniformly distributed vertical phase, has probability density function , so the midplane volume probability is .
In the genuinely three-dimensional regime , the geometric collision cross-section is . The relative velocity differs from the coplanar value only at order for the specified high-speed encounters. Therefore the inclined comet collision time is
At fixed the leading scaling is , with no leading dependence when . The displayed factor retains the first dependence on . Also in this averaging convention.
Inclination alone does not specify a collision time for one fixed orbit. If its orbital nodes miss the planet's orbit, a tilted Kepler orbit can have no collisions at all. The finite result is an orientation-averaged population result, or requires precession or scattering to sample those orientations. When , the three-dimensional estimate crosses over to the coplanar result instead of tending to zero.
A coplanar target sweeps a strip of width through the comet's local position probability. Hence the relevant geometric collision cross-section is a length, and the rare collision rate per comet is .
Using the corrected phase-mixed comet surface density and the notation , , the coplanar comet collision time is
For , this becomes , so at fixed stellar mass and planetary mass density. This is the mean waiting time for one orbiting comet; the mean interval between impacts from such independent comets is . It assumes rare encounters and orbital phase mixing, not a Poisson process derived from a single deterministic trajectory.
With negligible comet radius and mass, the planet's radius and escape velocity are
Gravitational focusing changes the limiting collision impact parameter from to . Thus it is negligible when .
Put and in the prograde approximation. Substituting gives
Equivalently . For , use . If negligible gravitational focusing is required for every coplanar near-parabolic orbit, including nearly tangential prograde encounters, use the smaller value .
The radial velocity of a Kepler orbit follows from the vis-viva equation after subtracting the tangential component:
Each radial interval is crossed twice per orbital period, so its fraction of time is
This is the phase-mixed radial probability of a Kepler orbit, normalized to one between and . Dividing by the annular area gives the phase-mixed comet surface density per comet:
For ,
The printed density has the powers of and interchanged. Its expression is too large by in this limit. The normalized residence-time derivation fixes the corrected expression, which is also required for the later ejection-time scaling. For a population of independent identical comets, multiply by to obtain a number surface density of a disk.
For an unperturbed Kepler orbit, successive revolutions advance the planet-relative orientation by modulo , where is the comet's orbital period. An irrational period ratio makes these orientations dense; sufficiently distant mean-motion resonance and adequate observation time justify the corresponding phase mixing approximation.
At each radius between its pericentre distance and apocentre distance, the comet eventually visits every azimuth in the rotating reference frame. The spatial projection is therefore
It is an annulus, with a nonuniform radial residence probability, rather than a uniformly filled area. Strictly, the full position-velocity phase space is not this annulus: at each radius the energy and angular momentum constrain the velocity, with inward and outward branches. The annulus is its position-space projection. This description assumes the orbital elements have not yet been substantially changed by planetary scattering.
Put . Conservation of specific orbital energy and specific angular momentum gives
The last comet expression is the vis-viva equation at the planet's orbit. The planet has only tangential velocity, while the comet's tangential component is . Consequently its prograde relative velocity is exactly, before planetary deflection,
In the near-parabolic encounter limit , this reduces to
The displayed approximation also requires . The assumptions and alone do not guarantee it: an orbit with encounters the planet near apoapsis and has , not .
If all coplanar near-parabolic planet-crossing comets are admitted, so that , the tangential component ranges from to when retrograde orbits are included. Thus
For prograde orbits alone the upper limit is ; for the stated deep-crossing limit , both prograde and retrograde encounters approach . These are the speeds outside the planet's gravitational well. The surface impact speed is , where is the planetary escape velocity; under negligible gravitational focusing the two speeds agree.
Three major research directions, appropriate to the scientific questions posed in 2018, are:
These are research goals rather than claims that the relevant mechanisms or habitable atmospheres have already been established.
A mass-radius curve of solar-composition substellar objects must specify age, irradiation and composition. For a mature, weakly irradiated hydrogen–helium sequence, the qualitative mass-radius relation has three main trends:
The conventional deuterium-burning mass near Jupiter masses marks a commonly used giant-planet/brown dwarf classification scale, not a sharp discontinuity in radius or a universal formation boundary. Young brown dwarfs are larger and cool by contraction; irradiation, a heavy-element core and hot-Jupiter radius inflation shift planets away from a single solar-composition curve.
The drawing is a qualitative mature sequence, not an interpolation of a specified evolutionary model grid. Three relevant observations, using representative historical measurements, are:
Gas-giant radius growth gives way to a nearly Jupiter-sized compressed branch, followed by rising radii in hydrogen-burning stars.
Use the single-layer greenhouse model with a blackbody surface and one isothermal atmospheric layer. The layer is transparent to incoming stellar radiation, absorbs a fraction of the surface's thermal radiation, and has the same thermal emissivity by Kirchhoff's law of thermal radiation. Here , and is the planetary equilibrium temperature defined by the absorbed global stellar flux . Neglect convection, latent heat transport and intrinsic heat.
The layer absorbs and emits upward and downward. For , its energy balance gives
The surface receives the absorbed stellar flux plus downward atmospheric emission, so
Eliminating yields
The outgoing top-of-atmosphere flux is , confirming overall energy conservation. At , and the decoupled layer's temperature is not determined; at , . This warming is the restriction of thermal escape by the absorbing and emitting layer.
The geometric albedo compares the planet's reflected brightness at full phase with that of a perfectly reflecting Lambertian surface in the form of a flat disc of the same projected area, illuminated by the same incident flux. The Bond albedo is the fraction of total incident stellar power reflected in all directions and over all wavelengths. They need not be equal: the planetary phase integral and the incident spectral weighting connect them.
For a blackbody star, the incident flux at orbital distance is
Assume negligible intrinsic luminosity, thermal emissivity one, and efficient day-night heat redistribution giving uniform emission over the whole planet. The absorbed and emitted powers are
Using the Stefan–Boltzmann law gives the planetary equilibrium temperature
For a representative emitting area encoded by a stellar flux redistribution factor , the equivalent expression is
with for global uniform emission and for uniform dayside-only emission. The Bond albedo, rather than the geometric albedo, belongs in the energy budget. Internal heat, wavelength-dependent emissivity and imperfect redistribution require corresponding modifications.
Three observational signatures constrain exoplanet atmospheric dynamics:
Opacity, exoplanet cloud distributions, and pressure-dependent brightness temperature affect the phase-curve interpretation. These measurements constrain circulation through atmospheric models; a single offset or line shift does not uniquely determine a three-dimensional wind field.
Use the standard local chemical quench level approximation: carbon monoxide-rich gas from the hot deep region is transported upward, and conversion becomes slower as the gas enters the cooler layers. Assume that neither a faster loss process nor strong compositional fractionation removes carbon monoxide above the quench level. For an effective mixing length , the eddy mixing time is , so outrunning conversion near requires
The usual order-of-magnitude choice is , the local atmospheric scale height at . Equal planetary mass and radius give the same gravity as Jupiter; with the same mean molecular weight, the atmospheric scale height scales linearly with temperature. To use the supplied reference, additionally adopt a representative Jovian reference temperature . Then
Using directly with and Jovian gives and , the same order of magnitude. The supplied Jovian height is approximate and does not specify its reference temperature. Inserting unchanged for the hot gas would instead give and neglect this temperature scaling.
The pressure separation is relevant to a stronger, whole-column transport estimate. With constant gravity and mean molecular weight, the profile gives
If one additionally requires diffusion through the entire column within , a sufficient conservative condition is . It is not a necessary local quench condition: the chemical relaxation time is expected to become much longer in the cooler gas, so a longer total transit time can still preserve carbon monoxide.
The usual quench estimate is of order under the stated scale-height assumptions. A unique bound for survival to cannot be inferred from one reaction time without assumptions about its variation, the mixing length and upper-atmospheric losses.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact