For a discrete-time martingale and real , let be the upcrossing count: buy on the first observation at or below , sell on the next observation at or above , and repeat up to time , counting only completed pairs. Writing , the Doob upcrossing inequality is
This convention permits the first purchase at time zero. Equivalently, the right side is , because the martingale has constant expected value.
For completeness, let indicate whether the trading rule holds one unit during . This is a predictable process, so the martingale transform has zero expected value. Every completed trade gains at least , and an unfinished trade loses at most . Thus , giving the inequality.
For the K-theory transfer of a finite covering, let be a vector bundle and define
On an evenly covered neighborhood the sheets identify this with a direct sum of local vector bundles. On overlaps the identifications permute the sheets and apply the transition maps of , so these local descriptions glue to a vector bundle on . This operation respects direct sums, hence extends to a homomorphism of Grothendieck groups
It obeys the projection formula for the K-theory transfer:
For actual vector bundles, this follows fiberwise by distributing the tensor product of vector bundles over the direct sum; it then extends to their Grothendieck groups.
Let be the permutation vector bundle of the covering. It has rank on every connected component, but need not be a trivial vector bundle; in particular one cannot replace by multiplication by integrally. Instead write
The componentwise nilpotence result from the preceding solution gives for some . In the localization of a ring , the finite geometric series
is an inverse. The projection formula for the K-theory transfer gives
Thus implies after inverting . More explicitly, is a left inverse, proving
All Topological K-theory groups below are complex and are indexed modulo two using Bott periodicity. For , Complex K-theory of a sphere gives
For an even-dimensional sphere, choose a generator of Reduced topological K-theory. Its square vanishes: the Chern character sends to a top-degree cohomology class, whose square is zero, and the Chern character is injective on this torsion-free abelian group. Thus the ring answers are
The exceptional zero-dimensional sphere consists of two points: with coordinatewise multiplication and . In particular its reduced generator is idempotent rather than square-zero.
For the Euler characteristic identity, induct over the cells of a finite CW complex. The starting CW complex consisting of vertices has , , and . If is obtained from by attaching one -dimensional cell, the quotient is , and the K-theory six-term exact sequence is
These abelian groups are finitely generated by induction. Tensoring the exact sequence with preserves exactness. The alternating sum of dimensions in a cyclic six-term exact sequence is zero, so
Therefore
There is a genuine convention issue in the nilpotence assertion. With the usual definition of Reduced topological K-theory as the kernel of restriction to one basepoint, the assertion needs to be connected. For based at its first point, lies in and satisfies for every . Thus it is not a nilpotent element. For an arbitrary finite CW complex, the correct assertion uses the rank map in topological K-theory on every connected component:
For a connected space, .
Here is an induction proving the corrected assertion. On the vertices, . For a positive-dimensional cell attachment , the ideal is square-zero. Indeed, lift two elements of to relative topological K-theory . Their product is induced by the reduced diagonal
This map is null-homotopic, since and is -connected. The relative product in topological K-theory is therefore zero, giving . If , its restriction belongs to , so induction gives for some . Then and . We have proved every Topological K-theory class of rank zero on every connected component is a nilpotent element, and hence the requested result for connected .
Choose a fiber monodromy representative fixing the boundary of the fiber Seifert surface pointwise. The boundary of each fiber is the Seifert longitude, precisely the slope used by zero Dehn filling. Attach the filling solid torus as , matching with the boundary of the fiber at . The fibers cap off to closed topological surfaces of the same genus ; extend the fiber monodromy across the disk by the identity. Thus
This is a foliation by fibers of a bundle over , and every leaf is compact with genus .
Choose a point in the interior of the capping disk, which fixes. Its suspension is an embedded closed curve in the mapping torus. It is transverse to the foliation and meets every fiber once. Hence every leaf meets a closed transversal to a foliation, which is the defining criterion for a taut foliation. Therefore the fiber foliation is taut.
The fiber monodromy is periodic when isotopy is allowed to move the boundary, in the sense of a periodic surface homeomorphism. Here is a justification from the Seifert fibered space structure, rather than a special formula about torus knots. Its base is a disk with cone-point orders . The fiber Seifert surface is an incompressible surface because its inclusion in the mapping torus is injective on fundamental groups. It is also a boundary-incompressible surface: lift a proposed boundary-compressing disk to the infinite cyclic cover and project to . This would homotope an essential arc of into , contradicting its essentiality. The classification of incompressible surfaces in Seifert fibered spaces therefore applies. A vertical surface in a Seifert fibered space has zero intersection with a regular Seifert fiber, whereas the fibration class evaluates on as . Thus the Seifert surface is isotopic to a horizontal surface in a Seifert fibered space, with intersections per regular orbit.
Following the oriented Seifert fibers from one intersection to the next gives a first-return homeomorphism of the horizontal topological surface. It is a representative of the fiber monodromy, and its -th power is the identity. It has order : a regular orbit meets the connected horizontal surface in a Seifert fibered space in cyclically ordered points. This realizes the periodic case of the Nielsen–Thurston classification theorem. It is neither an Anosov homeomorphism nor a pseudo-Anosov homeomorphism.
There is a boundary convention here. A representative fixed pointwise on the boundary is not periodic relative to the boundary: its -th power is a boundary Dehn twist (with sign determined by the return-map convention). Capping the boundary, or allowing it to rotate during isotopy, gives the finite-order representative intended by “periodic”. This distinguishes periodic surface type from literal finite order in the mapping class group relative to the boundary.
For any fibered knot, its Alexander module is with the deck transformation given by homological monodromy, so its Alexander polynomial of a knot is up to a unit. The general Turaev torsion relation and part (b) therefore give
This rational expression is a polynomial: in its factorization into cyclotomic polynomials, cancels all denominator factors. It is monic, has constant coefficient one, and has polynomial degree . The characteristic polynomial has polynomial degree , is monic, and has constant coefficient , because homological monodromy preserves the intersection form. These facts remove the unit ambiguity and give
The sign change between and is trivial because is even. As a separate geometric check, the orbifold Euler characteristic of the base is , and its -sheeted horizontal surface in a Seifert fibered space has Euler characteristic .
Write . Filling one end of times an annulus gives a solid torus, so is a solid torus. The prescribed algebraic intersection number of curves on an oriented surface convention gives . Hence
In , the first Dehn filling imposes , while . Therefore
The class is primitive because , a consequence of . It is therefore the disk-bounding meridian of a solid torus of . Since meets it once, Dehn filling along glues two solid torus pieces with disk boundaries meeting once. This is the standard genus-one Heegaard splitting of , so
To identify the regular fiber geometrically, put it on their common boundary torus. Invert the displayed basis change:
Here bounds a disk in the newly attached solid torus and bounds a disk in . Thus the curve has winding numbers and in the two complementary solid torus pieces. Both coefficients are positive and , so it is the positive torus knot. This identifies the torus knot directly from the genus-one splitting, without invoking a theorem specifically about torus knots.
Star the adjacent regions . Choose the Kauffman state of a knot diagram putting the marker at in region , at in region , at in region , and at in region . Every unstarred region is used exactly once, and every crossing has exactly one marker.
Figure 1.
The figure-eight graph, regions and Heegaard state
. Details.
In the full Alexander matrix, circle the entries , namely
In the reduced Alexander matrix , these are the diagonal entries in column order . The associated permutation is the identity, with sign of a permutation , so this Kauffman state of a knot diagram contributes
to . The other four nonzero permutation terms are . The drawing circles the same four entries literally; the boxes above identify them in the typeset matrix. Different row or generator conventions multiply the Alexander polynomial of a knot and its state weights by the corresponding overall unit.
Keep all four relators and all five generators, in the orders and . Under abelianization, these generators become . The Fox calculus rules are
For example, gives the nonzero Fox derivative entries , , , in columns , respectively. After abelianization these are . The full Alexander matrix is
The Fox calculus identity supplies a useful check:
Deleting the column, adjacent to the unbounded region across the marked meridian of a knot, gives
Thus is a representative of the Alexander polynomial of a knot of the figure-eight knot, with its customary ambiguity of multiplication by .
Use the region labels and curve orientations from part (a). A Dehn presentation of a knot group generator goes from the basepoint above the projection plane through its region and returns through the unbounded region. Equivalently it is dual to the correspondingly labeled disk of the Heegaard diagram. A crossing relator records the signed intersections of its curve with these disks. Setting gives
For example, the overpassing strand at equates the meridian of a knot words and ; at it equates and . The other two crossings equate with and with .
Choose the region-generator direction so that is the shown meridian of a knot . The Alexander numbering of the regions, starting from zero outside and increasing by one on crossing an oriented strand from right to left, is
One can also obtain this directly by abelianization of the relators: , , , and . The last two imply , and the resulting first homology group is freely generated by . Thus , with no extra torsion.
Label the four crossings in top, left-middle, right-middle, bottom order. Label the bounded regions (left), (right), (upper middle), (central bigon), (lower middle), and the unbounded region . The drawing preserves the crossings and the orientation of the supplied figure-eight knot diagram. Its overpassing strands are the outer-left/upper-right strand at , the upper-left/lower-central strand at , the upper-central/lower-right strand at , and the lower-left/outer-right strand at .
Figure 1.
The figure-eight graph, regions and Heegaard state
. Details.
Here is the Dehn presentation Heegaard diagram specified by this drawing. Replace the underlying four-valent planar graph by a small three-dimensional regular neighborhood and put . Since has four vertices and eight edges, has genus . On , take the five curves bordering the bounded faces, pushed slightly onto the boundary of . They bound a complete disk system in the complementary handlebody ; their labels are .
The four curves bound the disks dual to the four short crossing tunnels in . Lift the crossing circles shown in red onto the upper and lower sheets of , routing them along the corresponding face boundaries; the crossing's overpassing strand determines the lift. Orient the disk normals and the curves so that their signed successive intersections with the curves are
At the missing fourth corner is the unbounded region , whose generator is omitted. This sheet-lifting prescription, together with the projected graph, specifies the curves on the Heegaard surface; the red circles alone are only their local projections.
To recover the knot exterior from , attach five two-handles along the curves on one side and cap the resulting sphere with a three-handle. On the other side attach four two-handles along the curves. Compressing that side leaves the boundary torus of the knot exterior, which is retained. In particular, the counts are five compressions and four compressions, rather than two complete genus-five disk systems.
Let be the positively oriented Hopf link obtained by closing a two-strand braid with two positive crossings. Switching one crossing gives the two-component unlink; the oriented smoothing gives the unknot. The printed skein relation gives
Represent the right-handed trefoil knot by the closure of the two-strand braid with three positive crossings. Switching one crossing gives the unknot, while its oriented smoothing gives . Consequently
so the two Jones polynomials are
The second expression follows from the mirror of a link identity. They are unequal Laurent polynomials, so invariance under link isotopy proves that the right-handed and left-handed trefoils are not isotopic.
Reflection through the projection plane reverses the orientation of and exchanges the overpassing and underpassing strands at every crossing. Thus switching all crossings gives the mirror of a link, with the component orientations transported by the reflection.
Define . Reflection exchanges with and preserves the oriented smoothing. Apply the printed skein relation to the reflected triple at parameter :
Multiplication by gives the original skein relation for . Also . The stated uniqueness of the Jones polynomial now gives , hence
Insert a kink on any component of an oriented link diagram for . Switching the kink's crossing gives another link diagram of ; its oriented smoothing separates off a small unknot in a ball disjoint from the rest of . The skein relation therefore gives
Cancel the nonzero factor in the Laurent polynomial ring to obtain
Apply the given skein relation to a positive and a negative kink in a diagram of the unknot. Both crossed link diagrams represent the unknot, whereas the oriented smoothing represents the two-component unlink. Thus
Factor the left-hand side and cancel the nonzero factor in the Laurent polynomial ring:
The positive sign follows from the skein relation as printed in this paper. It differs from the frequently used Jones polynomial convention whose two-component unlink has value . With the printed convention, an -component link has invariant times that convention's Jones polynomial.
Take a Hopf link with its two unknot components labeled by integer surgery coefficients .
The slam-dunk move eliminates a meridional component with coefficient and replaces the other coefficient by . Eliminating the component with coefficient three gives
Thus this Dehn surgery on a framed link becomes Dehn filling on the unknot, with the required orientation. As a check, its surgery linking matrix is
whose determinant is five.
The elliptization theorem says that a closed oriented three-manifold with finite fundamental group has spherical geometry. When the fundamental group is a cyclic group, it is a lens space. Consequently the candidates are with , using the same surgery orientation convention throughout.
The oriented classification of lens spaces says that and are related by an orientation-preserving homeomorphism exactly when . Since , , and modulo five, the complete list is
These are three distinct oriented homeomorphism classes. Reversing orientation interchanges and ; the class containing and admits an orientation-reversing homeomorphism. The elliptization theorem and the stated oriented classification of lens spaces are the general classification results used here.
The solid torus supplied by the side has fundamental group generated by the image of , while is trivial. The two-handle imposes . The three-handles do not change the fundamental group, so
Use the meridian of a knot and Seifert longitude of the unknot on its boundary torus. The unknot's knot exterior is a solid torus whose disk-bounding curve is . A genus-one Heegaard diagram is therefore
Here the horizontal coordinate is and the vertical coordinate is . The drawing uses a small translate of to avoid intersections on the edge of the square; opposite edges are identified. The algebraic intersection number of curves on an oriented surface has absolute value five.
Starting with , attach a three-dimensional two-handle along , using its surface framing, and cap the resulting sphere with a three-handle. This gives the solid torus on that side. Attach a two-handle along , again using the surface framing, and cap its sphere with a three-handle. The second solid torus has its disk-bounding curve identified with , so the resulting oriented lens space is precisely the specified Dehn filling.
The level equation is . In particular , so the global affine coordinates on this level are . They identify it with
The diagonal circle action becomes and is free: at least one coordinate is nonzero, so fixing a point forces . Since the circle is compact, the Free proper Lie-group action theorem makes the quotient a smooth two-dimensional smooth manifold.
The map is the Hopf fibration. It is onto the complex projective line, and two unit representatives determine the same complex line precisely when they differ by a scalar of modulus one, hence by a circle orbit. Local sections, for example , show that the induced identification is a diffeomorphism. Therefore
This identifies the symplectic reduction as a smooth manifold; no computation of its reduced symplectic form is needed.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact