Generation increases the mobile electron or hole populations; interband excitation creates an electron-hole pair. Thermal excitation and absorbed photons are important sources, and impact ionization can multiply carriers in a strong field. Ordinary single-photon interband absorption needs enough photon energy to bridge the band gap, with the required momentum balance.
Electron-hole recombination removes a pair. Radiative electron-hole recombination emits a photon, with simple rate ; trap-assisted electron-hole recombination uses localized defect levels and transfers energy to the lattice; Auger recombination transfers the electron-hole recombination energy to another carrier. The last process becomes especially important at high injection because its rate contains products such as and . The detailed band structure and available defects determine which channel dominates.
At thermal thermodynamic equilibrium, generation and electron-hole recombination continue at equal rates. For the simple radiative model the net electron-hole recombination rate is , enforcing the semiconductor mass-action law. Under weak excitation with the majority density nearly fixed, an excess minority density often decays as , defining its minority carrier lifetime.
A short light pulse followed by time-resolved electrical conductivity or luminescence measures the relaxation. Spatial diffusion, trapping and instrumental response must be separated from electron-hole recombination before identifying a single fitted decay constant with the intrinsic lifetime. These processes control photodetector response and light-emitting-device efficiency.
Charge carrier mobility measures weak-field drift speed per electric field. For electrons and electron holes,
Both mobilities are positive, with SI units ; the opposite drift signs reflect the opposite carrier charges. In a simple isotropic relaxation-time model, electron mobility is and hole mobility is . These are momentum relaxation times, not the minority carrier lifetime for electron-hole recombination.
Scattering by phonons, ionized impurities and defects limits mobility. Increasing phonon populations commonly lowers mobility at high temperature; ionized-impurity scattering can dominate at low temperature and high semiconductor doping. Approximate addition of independent inverse relaxation times is the Matthiessen's rule. At sufficiently strong field, velocity saturation invalidates the constant-mobility drift law.
The Hall effect provides a measurement: a current-carrying bar in a perpendicular magnetic field develops a transverse voltage. In a one-carrier model and , combining the transverse voltage with longitudinal electrical conductivity. Multiple carrier types and scattering-dependent Hall factors require a more detailed interpretation.
This relates an thermodynamic equilibrium variance to the local stiffness of an appropriate thermodynamic free energy. At fixed bath temperature, suppose the effective thermodynamic free energy includes the constraints and the measure for a chosen coordinate. Its thermodynamic equilibrium probability density function is proportional to . Near a stable minimum , write
The resulting normal distribution gives the Gaussian fluctuation approximation
This is exact for a quadratic thermodynamic free energy with the stated flat coordinate measure; in general it is a small-fluctuation result. A smaller curvature means a softer restoring response and larger fluctuations. Near vanishing curvature, higher-order terms become important, so the quadratic approximation cannot alone predict an actual infinite variance.
For example optical trap Langevin calibration uses the Brownian displacement of a trapped bead: gives . A camera or position detector records the fluctuations. Finite exposure averages rapid motion and can bias the measured variance; the measurement protocol matters as well as the thermodynamic equilibrium identity.
The Clapeyron equation gives the slope of a two-phase phase coexistence curve. Let and be entropy and volume per molecule, or consistently per mole. Equality of the two chemical potentials and imply
At reversible coexistence the latent heat in the same amount convention is . Therefore
The relation assumes thermodynamic equilibrium between two bulk phases of a pure substance, neglecting curvature and other work terms. For vaporization both latent heat and volume change are positive, giving a positive vapor-pressure slope. If the vapor is approximately ideal and its volume dominates, the ideal-vapor Clausius-Clapeyron approximation gives with latent heat per molecule.
Experimentally, a sealed two-phase sample in a temperature-controlled bath supplies the coexistence pressure as temperature changes. Independent calorimetry and phase-density measurements supply and , allowing the pressure slope to test the equation. The formula connects those distinct measurements and is a practical route to latent heats.
This is the Joule-Thomson coefficient, , describing a temperature change during an isenthalpic pressure change. Here is enthalpy, is the heat capacity at constant pressure, and is volume, all for the same chosen amount of substance. Starting with and using the Gibbs free-energy Maxwell relation gives
Setting proves
In a steady insulated throttle or porous plug, negligible kinetic- and potential-energy changes make the upstream and downstream enthalpies equal. A positive coefficient gives cooling on a pressure decrease; a negative one gives warming. For an ideal gas, at fixed , so the coefficient is zero. Real-gas interactions permit cooling and an inversion curve, making the effect useful in gas refrigeration and liquefaction.
The measurement of the Joule-Thomson effect with a porous plug compares pressures and thermometers on the two sides of an insulated flow restriction. Suppressing external heat exchange and separating the readings from high-speed jets are part of making the enthalpy argument applicable; an arbitrary adiabatic expansion need not be isenthalpic.

There are unlisted articles, also show them or only show them.