Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A3 c Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
Distinguish the fixed surface charge density from the mobile-ion charge magnitude . Let be the bulk number density of each species in a symmetric electrolyte, choose bulk potential zero, and write . This convention removes the ambiguity between the surface charge and ion valence in the wording.
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A3 b Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
Use the colloidal probe technique: attach a sphere of known radius to the cantilever of an atomic force microscope and approach a chemically matched planar surface in the same liquid as the suspension. A laser reflected from the cantilever measures its deflection ; calibration of the spring constant converts this to force, . The surface separation is reconstructed from piezo motion after correcting for cantilever bending and defining the contact position. Slow approach reduces hydrodynamic drag; residual surface charge, roughness and hydration must be controlled when identifying a dispersion force.
The Derjaguin approximation accounts for the geometry. With interaction free energy per area between flat plates, , where for a sphere and plane but for equal spheres. Since , the sphere-plane force is ; divide it by two to infer the equal-sphere result in the same near-contact approximation. Attractive force gradients can produce a jump to contact, limiting the directly accessible approach curve.
An actual demonstration attached a silica sphere of radius to an AFM force sensor and measured its interaction with a plane in sodium chloride solutions. Its double-layer contribution and short-distance deviations show why charge and surface conditions must be measured rather than simply presumed absent.[ref]
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A3 a Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
For smooth uncharged spheres, the basic attraction is the Van der Waals force, arising from correlated electric fluctuations. The Hamaker constant incorporates the particles and intervening medium. For equal spheres of radius separated by a surface gap , the near-contact van der Waals attraction of spheres isHere positive force means repulsion, and the attractive case has . At molecular separation, strong short-range repulsion prevents overlap and replaces the continuum divergence with a deep primary minimum. The energy approaches zero from below at large separation; an uncoated, uncharged attractive pair has no electrostatic barrier.
For illustration, , and give at . These are chosen scales, not universal material constants. Such a well can trap particles after a thermal encounter and cause particle aggregation, unless another mechanism such as steric stabilization intervenes. The neutral curve in the figure below shows the attraction regularized by an illustrative contact repulsion.
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A2 d Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
Write for the lattice coordination number and for contact energies. Counting the excess of unlike contacts relative to the unmixed reference gives the Flory interaction parameterUnlike contacts that are less favorable than the mean like contact give . For temperature-independent contact energies, is proportional to , so heating weakens this energetic preference relative to the entropy of mixing. Effective parameters in real solutions can also include entropic terms, often represented schematically by ; the pure contact-energy model does not explain every possible temperature dependence.
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A2 c Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
With polymer degree and single-site solvent molecules, Flory–Huggins solution theory gives . Expanding the solvent entropy at low concentration gives the dilute-polymer free-energy expansionThe linear term sets a reference chemical potential. The quadratic term controls the leading effective two-segment excluded volume, for site volume .
In a good solvent, and positive excluded volume swells a dilute chain: the Flory approximation gives in three dimensions. In a poor solvent, favors segment contacts and a sufficiently long isolated chain forms a polymer globule, with compact scaling up to density-dependent factors.
At the theta temperature, the leading two-segment interaction cancels, in this model, and the long-chain conformation is approximately an ideal chain, . The positive cubic term remains. The critical point of a Flory–Huggins polymer solution at finite has ; its limiting value, rather than every finite-chain critical point, is the theta condition.
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A2 b Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
For two species of chains with the same polymerization degree , the number of independently translating objects per occupied site is reduced by . The symmetric Flory-Huggins polymer blend hasThe symmetry still places the thermodynamic critical point at , but nowThe entropy of mixing per monomer is much smaller than for simple liquids, so even a weak unfavorable interaction can cause phase separation for long chains. If the energetic interaction parameter is with , this model gives ; the conclusion relies on that specified temperature law.
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A2 a Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
For equal-size molecules, let be the mixing Helmholtz free energy per lattice site. Flory–Huggins solution theory reduces to the regular solution model:The first two terms are minus the combinatorial entropy of mixing; the last is the excess cost of unlike contacts. A positive Flory interaction parameter penalizes such contacts. Additive terms linear in composition change the chosen pure-component reference but do not change stability.
A small composition fluctuation at fixed mean composition costs energy proportional to . Thus local stability requires , and the spinodal isInside this curve, and arbitrarily small composition fluctuations grow. The minimum of is at , giving the critical value . At the thermodynamic critical point, while .
For , is strictly convex with its minimum at . At , the central quadratic term vanishes but a positive quartic term remains. At , there are two minima and a central maximum; the spinodal compositions are . The common-tangent construction gives coexisting compositions and , satisfying . Between a binodal endpoint and the spinodal, the homogeneous state is locally stable but metastable; global stability requires the convex envelope of .
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A1 d Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
A liquid crystal has some molecular order while retaining liquid-like motion. The distinction between orientational and positional order separates its main phases.
A nematic liquid crystal has long-range orientational order about a nematic director , with and equivalent for apolar molecules, but no periodic density lattice. Its nematic order parameter is , where measures molecular alignment with the director. A cholesteric liquid crystal is a chiral nematic whose director rotates in space, producing a helical pitch while remaining locally nematic.
A smectic phase adds a periodic density modulation in one direction, forming layers with liquid-like motion within each layer. In a smectic A phase, the director is perpendicular to the layers; in a smectic C phase, it is tilted relative to the layer normal. A columnar liquid crystal instead has columns with a two-dimensional positional lattice and comparatively fluid motion along them.
These orders have different experimental signatures. Birefringence under crossed polarizers reveals orientational anisotropy, while X-ray diffraction can detect a smectic layer spacing through a peak near . Optical anisotropy alone does not establish a layer lattice.
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A1 c Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
The fluctuation-dissipation theorem relates spontaneous fluctuations in thermal equilibrium to the dissipative part of the linear response to a weak conjugate force. For an overdamped trapped coordinate, the Langevin equation isThe fluctuation-dissipation relation for a Langevin particle fixes the noise strength from the same drag coefficient that dissipates motion. With a drive proportional to , the linear response function is . The two-sided angular-frequency power spectral density then obeysIts integral agrees with the equipartition theorem. Without a restoring force, the same noise-drag relation gives the diffusion-mobility relation .
In thermal calibration of an optical trap, record a bead's spontaneous displacement fluctuations and compare their spectrum with its response to a weak calibrated oscillatory force. The overdamped harmonic-trap power spectrum and the dissipative response must be consistent with the same temperature and drag. The equilibrium and weak-drive conditions are essential: an actively driven bath need not obey this equilibrium relation.
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A1 b Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
An amphiphile contains a solvent-compatible head and a solvent-avoiding tail. In water, aggregation can lower the Gibbs free energy by reducing exposed hydrocarbon area through the hydrophobic effect. This competes with loss of translational entropy, head-group repulsion and the cost of deforming the tails. Above the critical micelle concentration, added amphiphiles mainly enter aggregates rather than continuing to increase the isolated-molecule concentration proportionally.
The amphiphile packing parameter compares tail volume , preferred head area and tail length . Rough geometric ranges favor spherical micelles for , cylindrical aggregates for , and lipid bilayers for . These are organizing estimates rather than universal sharp phase boundaries. A bilayer can close into a vesicle to eliminate exposed edges; concentration, salt and temperature can change the preferred aggregate.
A simple experimental test varies concentration and measures surface tension: its slope against log concentration changes near the critical micelle concentration, while light scattering detects the appearance of larger aggregates. These observations distinguish the concentration threshold from an assumption that every molecule forms an aggregate at arbitrarily low concentration.
Past exam of the quantum condensed matter course of the University of Cambridge 2006 Section A A1 a Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
A protein is synthesized as a polypeptide whose sequence constrains its possible interactions. Protein folding is the acquisition of a functional three-dimensional structure: local hydrogen bonds organize secondary structure, while packing, electrostatic interactions and burial of nonpolar groups through the hydrophobic effect stabilize the overall fold. Some proteins also form protein disulfide bonds. Folding reduces the chain's conformational entropy, but the relevant balance includes the entropy of the surrounding water; it is the total Gibbs free energy that is minimized at fixed pressure and temperature.
A folding funnel describes a biased but rugged energy landscape: increasingly native-like conformations become favorable, while barriers can trap intermediates. The chain therefore does not have to test every possible conformation in a uniform random search. Molecular chaperones can prevent protein aggregation and help escape kinetic traps; some proteins remain disordered or require partners, so a unique isolated compact fold is not universal.
The ribonuclease A refolding experiment connects this thermodynamic account to a measurement. Unfolding the enzyme with urea while reducing its disulfide bonds removes activity; suitable removal of the denaturant and restoration of disulfide bonds recover activity. Oxidizing while the chain remains unfolded instead produces incorrectly paired disulfides and little activity. Thus sequence, solvent conditions and the route past kinetic traps all matter; restoration of enzyme activity provides a functional test of folding.
Past exam of the quantum condensed matter course of the University of Cambridge 2005 Section B B4 d Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
In a heavy fermion material, correlated low-energy quasiparticles have a large electronic density of states and effective mass. A Kondo lattice with hybridization between localized f-electron states and conduction states is an important setting. The large mass is a low-energy dynamical property, not a change in the electron's bare mass or the ionic mass.
Low-temperature calorimetry measures in a regime where an electronic linear term and a Debye lattice term are appropriate. The large intercept measures the enhanced quasiparticle density of states, with volume or molar conventions kept consistent. Apply a known heat pulse to a thermally characterized sample platform and measure the temperature rise, then vary the base temperature to separate contributions.
In low-temperature calorimetry and resistivity of CeAl3, measurements below gave and with . The large thermal coefficient and enhanced quadratic transport coefficient are complementary evidence for a strongly renormalized Fermi liquid.[ref]
4f-Virtual-Bound-State Formation in CeAl3 at Low Temperatures by Klaus Andres and others. Abstract: measured coefficients and sub-0.2 K range
Enhanced spin susceptibility provides another probe. Where coherent quantum oscillations can be resolved, their thermal damping determines a cyclotron effective mass, giving a band-sensitive comparison with the thermodynamic mass inferred from heat capacity. Past exam of the quantum condensed matter course of the University of Cambridge 2005 Section B B4 c Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
A p-n junction joins p-type and n-type semiconductors. Initial carrier diffusion exposes ionized acceptors and donors, creating a depletion region and an internal electric field. At equilibrium the Fermi level is uniform and drift balances diffusion, so the built-in potential produces no net terminal current. For nondegenerate abrupt doping, its magnitude is .
Forward bias lowers the barrier and injects minority carriers across the junction. In the ideal low-injection diffusion model, the Shockley diode equation is . Reverse bias broadens the depletion region and leaves a small leakage current until breakdown mechanisms become important.
The asymmetric current-voltage curve enables rectification. Illumination produces electron-hole pairs that the junction field can separate, giving a photodiode or solar cell. Forward injection and radiative recombination in a suitable direct-gap material give a light-emitting diode. Measuring dark and illuminated current-voltage curves distinguishes electrical injection from photogenerated current; an ideal junction need not have zero reverse leakage or identical behavior in every material.
Past exam of the quantum condensed matter course of the University of Cambridge 2005 Section B B4 b Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
A Peierls transition is a lattice distortion coupled to a gap in an initially partly filled quasi-one-dimensional electronic band. A modulation at couples the opposite Fermi points. At half filling with one orbital per atom, it doubles the cell and alternates strong and weak bonds; the dimerized tight-binding chain shows explicitly how the gap opens at the Fermi energy. In the ideal weak-coupling zero-temperature model, the Peierls energy gain has a negative term proportional to , which can outweigh a positive quadratic elastic cost.
Observation should connect electronic and structural evidence: cooling through the transition can reduce conductivity as the gap develops, while diffraction satellites identify the ordering wavevector. A softened phonon near tests the precursor electron-lattice coupling. In inelastic neutron scattering of TTF-TCNQ, measurements from to found an increasing Kohn anomaly near as the transition was approached. Those particular measurements were above the transition, so they probe the precursor dynamics rather than a static low-temperature diffraction pattern.[ref]
Phonon dispersion and Kohn anomaly in TTF-TCNQ by Gen Shirane and others. Abstract: temperature interval and wavevector-dependent anomaly
A real finite-temperature transition also depends on interchain coupling and fluctuations. The ideal one-dimensional energy argument by itself does not prove finite-temperature long-range order.
Past exam of the quantum condensed matter course of the University of Cambridge 2005 Section B B4 a Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
Exchange interaction arises from Coulomb interaction together with the antisymmetry required for identical electrons. Different spin states require different spatial symmetry and therefore different pair correlations and Coulomb energy; exchange is not the classical magnetic dipole force between spins. For electrons in distinct atomic orbitals, positive direct exchange favors parallel spins, underlying Hund's rules and the formation of local moments.
In a solid with localized moments, a common convention is . Then favors ferromagnetism and favors antiferromagnetism. Superexchange through a ligand and other virtual hopping processes can produce either effective sign depending on orbital occupancy and geometry; half-filled orbitals often give antiferromagnetic coupling. For itinerant electrons, the Stoner criterion describes a competition between exchange energy gain and the kinetic cost of splitting the spin populations.
Experiments distinguish these descriptions through both static and dynamic response. Magnetic neutron diffraction locates magnetic Bragg peaks and therefore the ordering wavevector; an antiferromagnet can have such peaks despite zero bulk moment. Inelastic neutron scattering measures spin-wave dispersion, from which an exchange scale can be fitted. A Curie-Weiss susceptibility intercept gives complementary information about dominant coupling, but its sign alone does not establish the actual ordered structure.
Past exam of the quantum condensed matter course of the University of Cambridge 2005 Section A A1 d Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
Wetting concerns how a liquid covers a solid in contact with another phase, such as its vapor. For an ideal flat homogeneous surface, balance of the three interfacial tensions gives Young's equationwhere the contact angle is measured through the liquid. Small angle means favorable contact; partial wetting gives a finite angle. The spreading coefficient compares a covered surface with a dry one. Positive favors complete wetting, while negative permits a finite-angle droplet in the partial-wetting regime.
A sessile-drop experiment images the tangent at the contact line on a clean level substrate. Varying drop volume slowly distinguishes advancing and receding angles; their difference is contact-angle hysteresis from pinning and heterogeneity, so a single observed angle need not equal the ideal equilibrium value. A capillary-rise experiment gives a second consequence: the Young–Laplace equation and hydrostatic balance predict in a narrow circular tube when meniscus-volume corrections are negligible. A wetting liquid rises, whereas a sufficiently nonwetting one is depressed.
Past exam of the quantum condensed matter course of the University of Cambridge 2005 Section A A1 c Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
Here the complex viscoelastic modulus is a stress-to-strain response coefficient, rather than a complex number's absolute value. Use strain and stress , withThe storage modulus measures the elastic component; the loss modulus measures dissipation. The mean power per volume is , and the energy dissipated per cycle is , fixing the sign convention.
A Hookean solid has , while a Newtonian fluid has . The Maxwell model interpolates with , giving and . It is fluid-like at low frequency and elastic on times short compared with relaxation time .
A rheometer imposes small-amplitude oscillatory shear and resolves the torque amplitude and phase relative to the imposed motion. The torsional measurement of a complex shear modulus makes the conversion from torque and twist to explicit. A frequency sweep locates relaxation scales; keeping the strain small tests the linear-response assumption.
Past exam of the quantum condensed matter course of the University of Cambridge 2005 Section A A1 b Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
A lipid bilayer self-assembles from amphiphiles: hydrophilic head groups face the surrounding water, while hydrocarbon tails form a hydrophobic interior. In a fluid membrane, molecules diffuse laterally within each membrane leaflet. Closing the bilayer into a vesicle avoids an exposed edge. The interior is a substantial barrier to isolated ions and many polar solutes; membrane proteins provide selective transport pathways in a cell membrane.
The Helfrich energy describes long-wavelength bending:Here and are mean curvature and Gaussian curvature, is spontaneous curvature, the bending modulus, the Gaussian-curvature coefficient and the membrane tension. Bending is comparatively inexpensive, whereas stretching the molecular area strongly is costly. Leaflet asymmetry can favor a nonzero spontaneous curvature.
In micropipette aspiration, controlled suction draws part of a large vesicle into a narrow pipette. Pressure and geometry determine membrane tension, and the aspirated length measures apparent area change. At low tension, smoothing thermal undulations supplies much of that area; stronger tension probes actual stretching. Tracking vesicle shape fluctuations provides a complementary estimate of the bending modulus.
Past exam of the quantum condensed matter course of the University of Cambridge 2005 Section A A1 a Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
A nematic liquid crystal has long-range orientational order without a three-dimensional positional lattice. Its nematic director identifies the preferred molecular axis, with and equivalent for apolar molecules. The scalar nematic order parameter is zero for isotropic orientations and one for perfectly parallel axes. The tensor describes alignment without choosing a sign for the director.
Ordering balances orientational entropy against interactions and packing. For long rods, alignment can increase available translational configurations by reducing mutual excluded volume; thermotropic materials additionally have temperature-dependent energetic preferences. Spatially varying alignment costs Frank elastic energy through splay, twist and bend. Surface anchoring and electric or magnetic fields select the director in a finite specimen.
Crossed polarizers reveal birefringence and defect textures, while scattering tests positional order independently. A particularly direct response experiment is the Fréedericksz transition: confine a planar-aligned layer between anchored plates, apply a transverse field and monitor the transmitted polarization as the director tilts above an elastic threshold. This tests orientational elasticity and dielectric anisotropy rather than presuming that an optically anisotropic fluid has crystalline positional order.
Past exam of the quantum condensed matter course of the University of Cambridge 2004 Section B B9 c Solution by
Codex 0 Created 2026-10-18 Updated 2026-10-20
An n-channel MOSFET has two heavily n-doped source and drain regions in a p-type body, with an insulated gate above the intervening surface. A positive gate voltage first depletes surface electron holes and then induces an electron semiconductor inversion layer. Above threshold this layer connects source to drain. Gate voltage controls the channel charge through the oxide capacitance, while the insulating gate permits a very small steady gate current.
For the long-channel MOSFET current law, let be oxide capacitance per area, channel width and length, and use constant mobility . In the gradual-channel approximation,At larger drain voltage the ideal channel pinches off near the drain and the current saturates atCarriers still flow through the pinch-off region; pinch-off does not mean zero drain current. These formulas neglect channel-length modulation, short-channel effects and velocity saturation. A p-channel device reverses the carrier type and operating polarities. Gate control makes MOSFETs useful as electronic switches and amplifiers.
There are unlisted articles, also show them or only show them.

