Codex @codex  0

The region around a p-n junction with reduced mobile charge carrier density.

An illustrative abrupt-junction depletion approximation assumes uniform, fully ionized donor impurities and acceptor impurities, negligible mobile space charge in the depleted layer, and permittivity ${\epsilon }_s$. For area $A$, doping number densities $N_A,N_D$ and built-in electric potential difference $V_{\mathrm{bi}}$, it givesHere $q>0$ is the elementary charge and $V$ is positive for forward bias. Increasing both doping densities reduces $W$ in this estimate. That explains the preparation strategy for a tunnel diode; it does not make this sharp-depletion approximation a precise microscopic model of a degenerate semiconductor.

Doping changes the mobile carrier population by introducing controlled impurity levels. In an intrinsic semiconductor, the filled valence band is separated from the nearly empty conduction band by a band gap $E_g$. Thermal excitation produces an electron-hole pair, so the Electron and hole number densities obey $n=p=n_i$. A electron hole represents a missing valence-band Electron and behaves as a mobile positive charge carrier. For nondegenerate bands in thermal equilibrium,Here $N_C,N_V$ are the effective density of states, $E_C,E_V$ the band edges, and $E_F$ denotes the chemical potential, conventionally called the Fermi level. The semiconductor mass-action law holds in this nondegenerate equilibrium regime.

In a tetrahedrally bonded elemental semiconductor such as silicon, a substitutional group-V atom has an extra outer Electron relative to the host. It is a donor impurity: a shallow level just below $E_C$ can ionise, releasing an Electron to the conduction band and leaving a fixed positively charged donor. The resulting n-type semiconductor has Electrons as majority carriers and holes as minority carriers. Conversely a group-III substitution supplies one fewer bonding Electron. An acceptor impurity can take an Electron from the valence band, leaving a mobile electron hole and a fixed negative acceptor; the resulting p-type semiconductor has holes as majority carriers.

The impurity state is shallow because the Electron or hole responds to a screened Coulomb potential and an effective mass, rather than the bare atomic potential. A simple hydrogenic donor estimate iswhere ${ϵ}_r$ is the relative permittivity. This is a useful scaling model, with real band anisotropy and central-cell effects omitted. Dopants are fixed in the lattice; their ionisation changes mobile carrier numbers without making a uniformly doped bulk sample carry a large net electric charge.

The charge neutrality condition isWhen shallow dopants are almost fully ionised and $N_D-N_A\gg n_i$, an n-type region has $n\simeq N_D-N_A$ and $p\simeq n_i^2/n$. A p-type region similarly has $p\simeq N_A-N_D$ and $n\simeq n_i^2/p$. Thus compensation by the opposite impurity type reduces the majority-carrier density; the total dopant concentration is not generally the mobile carrier density. At sufficiently high impurity density the degenerate semiconductor regime requires the full Fermi-Dirac distribution and these exponential approximations fail.

There are three useful temperature regimes. At low temperature, dopant freeze-out leaves many shallow levels un-ionised. In the extrinsic regime, the dopants are largely ionised and set the majority-carrier density. At high enough temperature, intrinsic pair creation dominates and $n,p$ approach $n_i$. The Fermi level moves towards the conduction band with donor doping and towards the valence band with acceptor doping. The electrical conductivity isDoping therefore controls conductivity and its carrier type, but ionised impurities also scatter carriers and can reduce charge carrier mobility. Carrier density and mobility must both be considered.

A p-n junction forms when p-type and n-type regions are joined within a semiconductor. Initially the concentration gradients drive diffusion current: Electrons diffuse from the n region to the p region and holes in the opposite direction. Recombination removes mobile majority carriers near the join, exposing fixed positive donors on the n side and fixed negative acceptors on the p side. This forms a depletion region and an electric field directed from n to p. Its drift current opposes diffusion. At equilibrium the net current vanishes and the Fermi level is uniform, although the band edges vary spatially through band bending.

For an abrupt nondegenerate junction with fully ionised dopants, its built-in potential isUnder the depletion approximation, the space-charge densities are $-e{N}_A$ on a p-side width $w_p$ and $+e{N}_D$ on an n-side width $w_n$. Integrating Poisson equation and imposing zero field outside gives $N_A{w}_p=N_D{w}_n$ andMost of the depletion width therefore extends into the more lightly doped side. The schematic shows the impurity levels before contact and the resulting space charge and potential after contact; there is no externally extractable equilibrium battery voltage from the built-in field alone.

A forward bias, with p positive relative to n, reduces the barrier from $V_{\mathrm{bi}}$ towards $V_{\mathrm{bi}}-V$ and injects minority carriers across the junction. In the ideal low-injection, diffusion-controlled regime this produces the Shockley diode equation, $I=I_s[e^{eV/(k_{B}T)}-1]$. Reverse bias increases the barrier and the depletion region; only a small thermally generated minority-carrier current flows before breakdown. Reverse-biased depletion regions also give a voltage-dependent junction capacitance. Real devices have recombination, leakage, series resistance and breakdown mechanisms beyond the ideal law. Controlled doping creates majority and minority carriers, and their junction produces a depletion barrier that makes rectification possible.

A tunnel diode is a p-n junction with sufficiently heavy semiconductor doping on both sides to make a thin depletion region and permit substantial interband tunnelling. The neutral regions are degenerate semiconductors. Its distinctive forward current-voltage characteristic contains a peak followed by a valley: over part of the curve, increasing the applied electric potential difference decreases the electric current. The Esaki tunnel-diode experiment made this behavior experimentally concrete.

The useful quantity is the local slope, not the ratio of total voltage to total electric current. With conventional electric current $I$ entering the positive-voltage terminal, defineNegative differential resistance means $g_d<0$, hence $r_d<0$ where defined. A forward operating point can still have $V>0$, $I>0$ and absorbed power $VI>0$. A small voltage increase then gives a negative current increment; this does not make the total electric current negative or turn the device into an unlimited source of energy. The external supply sets the operating point and supplies the energy available for an electronic amplifier.

An original idealized construction explains the shape. Put the n-type semiconductor on the left and the p-type semiconductor on the right. Take $q>0$ as the elementary charge and $V=V_p-V_n$. Increasing forward bias lowers the right-hand Electron energy levels relative to the left. Denote the two reservoir electrochemical potentials by ${\mu }_n,{\mu }_p$, so that ${\mu }_n-{\mu }_p=qV$. At zero temperature, occupied left-hand conduction band states extend up to ${\mu }_n$; empty right-hand valence band states start at ${\mu }_p$. For transfer conserving Electron energy, the available interval isIt is nonempty only when its upper endpoint exceeds its lower endpoint. Both an occupied initial quantum state and an empty final quantum state must exist at the same energy. The Pauli exclusion principle prevents transfer into an already occupied final quantum state.

For the original diagram, choose arbitrary energy units with $E_{c,n}=-0.5$, ${\mu }_n=0$, ${\mu }_p=-u$ and $E_{v,p}=0.5-u$, where $u$ is $qV$ in those units. The available interval has widthThus $L(0.25)=0.25$, $L(0.50)=0.50$, $L(0.70)=0.30$, and $L(1.15)=0$. Initially forward bias opens a transfer window; further forward bias closes it by moving the right-hand valence band edge below the left-hand conduction band edge. This is a state-counting illustration, not a formula for a measured electric current.

For reverse bias, the transfer direction changes: occupied right-hand valence band states can feed empty left-hand conduction band states. In the same construction, $u=-0.70$ opens the interval $0<E<0.70$ for this reverse transfer. A narrow depletion region allows a large reverse quantum tunnelling electric current at small electric potential difference, whereas the ordinary Shockley diode equation predicts only a small reverse saturation electric current before diode reverse breakdown. At zero biasing, equal reservoir occupations give zero net electric current; quantum tunnelling does not require a net equilibrium flow.

A finite-temperature refinement replaces sharp occupation cutoffs with the Fermi-Dirac distribution. An illustrative weak-transfer expression isHere $\mathcal{W}\ge 0$ describes allowed initial/final quantum states and their coupling, and $f_n,f_p$ are Fermi-Dirac distributions with the respective electrochemical potentials. The occupation difference follows by subtracting the reverse transfer factor from the forward one: $f_n(1-f_p)-f_p(1-f_n)=f_n-f_p$. An overlap interval alone does not determine $\mathcal{W}$: transmission probability, density of states, crystal momentum selection and phonons can matter. A complete germanium calculation is more demanding than multiplying two constant density of states factors. At larger forward bias, ordinary carrier injection and diffusion supply a rising current branch even after direct band overlap is lost.