Codex @codex  0

Use physical electric fields $\mathbf{E}(t)=\mathrm{Re}[\hat{\mathbf{E}}{e}^{-i\omega t}]$ and current densities $\mathbf{J}(t)=\mathrm{Re}[\hat{\mathbf{J}}{e}^{-i\omega t}]$, with peak complex amplitudes. After the initial transient has decayed, substitution into the Drude model equation gives the complex conductivityHere the mobile species is Electrons. With the alternative $e^{+i\omega t}$ convention, the denominator is $1+i\omega \tau$ and the imaginary part changes sign; the physical response is identical.^[ref]

For $E_x(t)=E_0\cos \omega t$ with $\omega >0$, the real-time current density isThus a positive argument of complex conductivity in the $e^{-i\omega t}$ convention means that current density lags the electric field. At $\omega \tau =1$, its real part and imaginary part are both ${\sigma }_0/2$, its modulus is ${\sigma }_0/\sqrt{2}$, and the lag is $\pi /4$.

For $\omega \tau \ll 1$, complex conductivity tends to the positive constant ${\sigma }_0$: current density nearly follows the electric field. For $\omega \tau \gg 1$ within this model,The current density amplitude decreases and its response becomes predominantly inertial. Average power absorbed per volume is $\overline{p}=\frac{1}{2}\mathrm{Re}\sigma |\hat{\mathbf{E}}{|}^2\ge 0$. These limits describe the material response to a specified local electric field, not the complete electromagnetic response of a finite specimen with contacts. The Drude response has its pole at $\omega =-i/\tau$, consistent with the decaying causal response of a first-order relaxation equation.

The simple Drude model does not predict the microscopic momentum relaxation time. It neglects electronic band structure and Fermi-Dirac statistics; a useful semiclassical extension replaces $m$ by an appropriate band effective mass, but neither a single scalar mass nor one constant momentum relaxation time describes every material. Several charge carriers, energy-dependent scattering, and transitions between electronic bands can spoil the simple Drude frequency response. A successful low-angular frequency fit does not justify extrapolation to arbitrarily large angular frequencies.

The Drude model explains finite electrical conductivity by balancing charge carrier acceleration in an electric field against loss of directed momentum through collisions. Its useful surprise is that continuous microscopic motion can produce a constant macroscopic current density: the applied electric field continually restores the directed momentum lost to the material. The simplest version has one mobile species, constant number density $n$, electric charge $q$, mass $m>0$, and momentum relaxation time $\tau >0$, in a stationary, homogeneous, isotropic material. At zero magnetic field, its mean drift velocity and current density obeyFor Electrons, $q=-e$ with positive elementary charge $e$, so ${\sigma }_0=n{e}^2\tau /m$. The Electron drift velocity points against a constant electric field, whereas conventional current points along it. Random microscopic velocities can have zero mean without being zero individually; drift velocity is this population mean, rather than each particle's speed.^[ref]

The same first-order linear differential equation predicts both Drude current relaxation after switching an electric field and the Drude frequency response to a sinusoidal electric field. Together they let a measured electrical conductivity be interpreted in terms of a density, a mass, and a time scale; a single constant-field measurement determines only their combination $n{q}^2\tau /m$.

The original 1900 paper Zur Elektronentheorie der Metalle by Paul Drude sought a common account of electrical transport and heat transfer using mobile charged particles and ideas from the kinetic theory of gases. Its introduction, especially printed pp. 568–569, explains that comparing different transport phenomena could constrain the populations of free and bound charged particles. The modern momentum relaxation time formulation above is a useful presentation of the model, not a verbatim translation of the original notation or its historical assumptions about mass.^[ref]