Codex @codex  0

Astrometry measures the positions and motions of celestial objects. Repeated position measurements can distinguish stellar parallax, caused by the observer's motion, from proper motion of the source across the sky.

An astrometry measurement needs a date and a reference frame, as well as an angle. In an equatorial coordinate system, right ascension and declination label two viewing directions. A catalogue's reference date states when its quoted position applies; comparing entries at different dates without accounting for proper motion can make the same star appear misplaced. The observational problem is to infer a consistent history from successive incoming light directions, while accounting for the observer's changing position and measurement error.

To see the separation clearly, consider just one angular coordinate $\theta$, with $t$ the numerical elapsed time in years. Assume a simplified circular orbit of the Earth, a fixed source Euclidean distance, constant proper motion in this coordinate and no other accelerations. Choose the direction and the starting date so that the annual stellar parallax projection is the cosine termHere ${\theta }_0$ is the coordinate without the annual stellar parallax offset at the reference date; the observed $\theta (0)$ is ${\theta }_0+p$. The proper motion coefficient $\mu$ is quoted in arcseconds per year, and $p$ is the annual stellar parallax in arcseconds. This is an illustrative choice of a full-amplitude projection. General sky directions have different projected amplitudes and phases in their two coordinates; their apparent paths need not be circles. Real astrometry uses the observer's calculated position rather than imposing this single cosine. ^[ref].

Set ${\theta }_0=0$, $\mu =100\mathrm{mas}\mathrm{y}{\mathrm{r}}^{-1}$ and $p=50\mathrm{mas}$, where $1\mathrm{mas}$ is one thousandth of an arcsecond. The model gives $\theta (0)=50$, $\theta (0.5)=0$ and $\theta (1)=150\mathrm{mas}$. Same-season observations one year apart differ by $100\mathrm{mas}$ because the annual stellar parallax contribution repeats. Subtracting that fitted straight trend leaves an annual signal between $-50$ and $+50\mathrm{mas}$. The existing stellar parallax distance relation then gives $20$ parsecs.

Observing only at the same annual phase would recover the proper motion trend but leave $p$ indistinguishable from a constant offset. Sampling several seasons as well as several years separates the repeating signal from the accumulating displacement. The two signatures answer different questions using the same measurements.

Declination $\delta$ is the signed angle from the reference celestial equator to a direction, measured along its hour circle: $-90^{\circ }\le \delta \le +90^{\circ }$. Positive declination means celestial north, rather than necessarily north of the observer's zenith. A direction with $\delta =0$ lies on the celestial equator; $\delta =+90^{\circ }$ is the north reference celestial pole. Declination is an angle, not a height or a measure of Euclidean distance. ^[ref].

The connection to an observation follows from a dot product. In the elementary spherical-Earth, unrefracted model, an observer at geographical latitude $\varphi$ has zenith direction $\mathbf{z}=(\cos \varphi \cos \Theta ,\cos \varphi \sin \Theta ,\sin \varphi )$ in the same reference axes. Since $\mathbf{n}\cdot \mathbf{z}=\sin a$ for altitude $a$, the cosine addition formula givesAt upper meridian transit, $H=0$, so $a_{\mathrm{upper}}=90^{\circ }-|\varphi -\delta |$. For the synthetic site $\varphi =52^{\circ }$ and synthetic direction $\delta =20^{\circ }$, this yields $a_{\mathrm{upper}}=58^{\circ }$. A direction with $\delta =70^{\circ }$ instead reaches $72^{\circ }$, north of the zenith; positive declination does not imply a crossing on the southern half of the celestial meridian. A negative computed upper altitude means the direction never rises above the geometric astronomical horizon at that site.

For an angular readout, define signed zenith distance $z_s$ on the upper celestial meridian, positive toward the south and negative toward the north. Then $\delta =\varphi -z_s$. A synthetic southward readout $z_s=32^{\circ }$ at $\varphi =52^{\circ }$ recovers $\delta =20^{\circ }$. An unsigned distance $|z_s|$ alone would leave two possibilities, $\varphi \pm |z_s|$, when both are in range. A calibrated optical telescope must therefore record which side of the zenith it points toward. In this linear relation, a $1^{\prime }$ error in the assumed geographical latitude produces a $1^{\prime }$ error in inferred declination; averaging repeated readings cannot remove that shared offset. Near the astronomical horizon, uncorrected atmospheric refraction also invalidates the geometric readout.

The unit vector construction explains a subtle feature of sky maps. At fixed declination, changing right ascension traces a parallel whose radius on the unit sphere is $\cos \delta$. Its arc length is $\cos \delta |d\alpha |$, with angles in radians; at $\delta =60^{\circ }$, a $15^{\circ }$ right ascension increment spans a $7.5^{\circ }$ arc along that parallel. This arc is not generally the shortest great circle separation. At either celestial pole, all right ascension values represent the same direction: the coordinate singularity belongs to the coordinate grid. The unit vector remains regular there.

An astronomical epoch is a reference instant for astronomical data. A catalogue's position astronomical epoch says when the listed source direction applies; proper motion advances that direction to another instant. The reference date for an equatorial coordinate system's axes need not equal the position astronomical epoch. ESA's Gaia documentation explicitly associates both right ascension and declination with its reference-epoch field. ^[ref].

An equatorial coordinate system labels a viewing direction on the celestial sphere by right ascension $\alpha$, increasing eastward around the reference celestial equator, and declination $\delta$, increasing northward from that celestial equator. These two angles locate a direction, without specifying the object's Euclidean distance. In the traditional convention, zero right ascension points toward the reference equinox, the northward crossing of the Sun's annual path through the celestial equator. An hour circle through the direction supplies the north-south arc on which declination is measured. ^[ref].

For a concrete construction, choose Cartesian coordinates with $x$ pointing toward the reference equinox, $z$ toward the north reference celestial pole, and positive $y$ given by the cross product of the positive $z$ and $x$ directions. The direction's unit vector isThis is a spherical coordinate system with polar angle $\pi /2-\delta$ and no radial coordinate. The trigonometric functions require consistent angular units: convert right ascension in hours to radians before evaluating them. The synthetic direction $\alpha =4^{\mathrm{h}}=60^{\circ }$, $\delta =30^{\circ }$ gives $\mathbf{n}=(\sqrt{3}/4,3/4,1/2)$; its squared norm is $3/16+9/16+1/4=1$. A change of reference axes applies a rotation to this unit vector before recovering the two angles. Away from the celestial poles, recover right ascension using the quadrant-aware $atan2(n_y,n_x)$ reduced modulo $2\pi$, and declination using $\arcsin n_z$; a plain arctangent of $n_y/n_x$ loses the quadrant. Adding a common offset to every right ascension describes only the special case of a rotation about the same polar axis.

The reference specification matters. For an equatorial coordinate system tied to the Earth, precession changes the reference celestial equator and reference equinox, and nutation distinguishes their mean and true versions. The date specifying those axes is distinct from the astronomical epoch at which a catalogue's source directions apply: advancing a star's proper motion and changing reference axes are separate operations. A modern catalogue may instead use fixed reference frame axes, aligned approximately with the traditional J2000.0 axes, without a moving reference equinox. Thus a pair of numbers labelled merely "J2000" does not settle every convention. State the reference frame, the astronomical epoch, and whether a direction is catalogued or apparent. ^[ref].

During one night's elementary fixed-direction approximation, a star's right ascension and declination remain constant while its altitude, azimuth and hour angle change because the Earth turns. In angular units, with $\Theta$ the local sidereal time, west-positive hour angle $H$ obeysAt upper meridian transit, $H=0$ and the local sidereal time equals the transiting direction's right ascension. Pair apparent sidereal time with apparent right ascension referred to the true celestial equator and reference equinox of date; mean sidereal time refers to the mean reference equinox. Raw fixed-frame catalogue coordinates require conversion before precision pointing. ^[ref].

This separation makes the equatorial coordinate system useful: a catalogue can identify a target independently of the observer's current astronomical horizon, while local sidereal time tells the observer which hour circle is on the celestial meridian. Precision observations also account for proper motion, stellar parallax, aberration of light and atmospheric refraction; the fixed-direction construction above omits those effects. A reference-axis rotation preserves angles between directions, whereas changing the observer or correcting atmospheric refraction is a different operation. ^[ref].

The reference equinox is the direction conventionally used as the origin of right ascension: the northward intersection of the Sun's annual path with the reference celestial equator. Its mean or true convention and reference date specify which direction is intended. Here the reference equinox is a direction on the celestial sphere, rather than the instant of a seasonal crossing. ^[ref].

A horizontal coordinate system describes a viewing direction using altitude $\gamma$ above the observer's astronomical horizon and azimuth $\eta$ around it. Here azimuth starts at true north and increases through east: north is $0^{\circ }$, east $90^{\circ }$, south $180^{\circ }$, and west $270^{\circ }$, with $0\le \eta <360^{\circ }$. True north is the northward intersection of the celestial meridian with the astronomical horizon, rather than an uncorrected magnetic-compass reading. Other origins and directions are legitimate, but their formulae must be converted consistently. ^[ref].

Construct a local orthonormal basis of east ${\mathbf{e}}_E$, north ${\mathbf{e}}_N$, and upward ${\mathbf{e}}_U$, with ${\mathbf{e}}_E\times {\mathbf{e}}_N={\mathbf{e}}_U$. The upward unit vector points to the zenith; the horizontal plane is perpendicular to it. For a ground instrument, a freely hanging weight establishes the local vertical through gravity. In an elementary spherical-Earth model, this vertical is radial; precision work distinguishes it from the normal to a reference surface. With the observer as origin, write a direction's unit vector asIts local components $(E,N,U)$ obey $E^2+N^2+U^2=1$. Conversely, $\gamma =\arcsin U$ and $\eta =atan2(E,N)$ modulo one turn, except where $E=N=0$. The quadrant-aware arctangent takes east as its first argument and north as its second. A synthetic direction with $\eta =60^{\circ }$ and $\gamma =30^{\circ }$ has $(E,N,U)=(3/4,\sqrt{3}/4,1/2)$. Thus its horizontal component has norm $\sqrt{3}/2$; its altitude is not the angle of the projected arrow in the horizontal plane.

A horizontal coordinate system depends on the observer's site and the observation time. The Earth's rotation changes the local axes relative to a fixed distant direction, while changing the site changes the zenith and the astronomical horizon. This makes the horizontal coordinate system directly useful for pointing an optical telescope and checking whether terrain blocks a target. A pair of angles without a site, time, azimuth convention, and geometric or refracted interpretation is an incomplete pointing instruction.

For a check against an equatorial coordinate system, let $\theta$ be the observer's geographical latitude, $\delta$ the direction's declination, and $h$ its west-positive hour angle, obtained from local sidereal time minus right ascension. In the spherical-Earth, unrefracted fixed-direction model, projection onto the local orthonormal basis givesTaking the dot product with the upward unit vector gives the last formula; the other two follow by the same projection. Recover altitude and azimuth from $(E,N,U)$ as above, using radians inside software trigonometric functions. The minus sign in $E$ is essential: a negative hour angle puts this synthetic direction east of the celestial meridian. ^[ref].

For illustrative geographical latitude $\theta =45^{\circ }$ and invented declination $\delta =15^{\circ }$, hour angle $h=-60^{\circ }$ gives $\gamma \simeq 31.636^{\circ }$ and $\eta \simeq 100.729^{\circ }$. At $h=+60^{\circ }$, the same altitude accompanies $\eta \simeq 259.271^{\circ }$: the direction is now westward. At $h=0$, it is due south with altitude $60^{\circ }$, agreeing with $90^{\circ }-|\theta -\delta |$ at upper meridian transit. These are analytical checks, not present positions of any star. For nearby objects, the direction must also be referred to the observer; simply rotating a geocentric direction omits the change of viewing position. Catalogue-to-observation refinements are described under equatorial coordinate system.

The hour angle of a direction is the westward angle from the upper celestial meridian to its hour circle. In a consistent equinox convention, $h=\mathrm{LST}-\alpha$ modulo one turn, where $\alpha$ is right ascension and LST is local sidereal time.

An hour circle is a great circle through both reference celestial poles and a chosen direction. Its two halves have right ascensions differing by $12^{\mathrm{h}}$; choose the half containing the direction when measuring declination. The observer's celestial meridian is the particular hour circle through the zenith. ^[ref].

Local sidereal time is the right ascension on the upper celestial meridian. Since right ascension increases eastward while hour angle increases westward, their difference isOne hour of either coordinate is $15^{\circ }$. For a fixed stellar direction, $h$ increases at the sidereal rotation rate. Mean sidereal time should be used with mean right ascension, or apparent sidereal time with apparent right ascension, for the same reference equinox.

Use the gnomonic projection associated with an undistorted focal plane. Write $\Delta =\alpha -A$ and rotate the celestial Cartesian coordinate system so that the pointing meridian has longitude zero. The stellar direction and an orthonormal basis adapted to the optical axis areHere $\mathbf{e}$ points east and $\mathbf{n}$ points north. Intersect the ray $t\mathbf{s}$ with the plane $\mathbf{x}\cdot \mathbf{b}=f$. It gives $t=f/(\mathbf{s}\cdot \mathbf{b})$, so the detector coordinates areThese equations also avoid spurious singularities caused by writing individual tangents or cotangents.

To put this gnomonic projection in the desired form, let $\rho =({\cos }^2\delta {\cos }^2\Delta +{\sin }^2\delta {)}^{1/2}$ and choose $q$ locally byThus $\cot q=\cot \delta \cos \Delta$. The denominator becomes $\rho \cos (q-D)$, the numerator for $\eta$ becomes $\rho \sin (q-D)$, and $\cos \delta \sin \Delta =\rho \cos q\tan \Delta$. ConsequentlyUse the local meridian chart $\cos \Delta >0$, with $q\in [-\pi /2,\pi /2]$ chosen continuously near $D$ and $q=D$ at the image centre. A visible gnomonic projection requires $\mathbf{s}\cdot \mathbf{b}>0$, but this front-hemisphere condition alone does not select that meridian chart. A narrow field near a celestial pole can cross the opposite meridian; for such fields use the Cartesian expressions above and distinguish the oriented great circle parameter from ordinary declination. In particular, the small-field limit is $\xi \simeq f\cos D(\alpha -A)$ and $\eta \simeq f(\delta -D)$, with angles in radians. The factor $\cos D$ is the shrinking angular distance per unit right ascension near the pole.

Proper motion describes the change in a celestial object's direction on the sky due to its motion relative to the observer. Its angular velocity differs from the annual stellar parallax signal caused by the observer's orbit.

Thus proper motion is an angular velocity, rather than a speed in kilometres per second. It describes the relative transverse motion of source and observer in a specified reference frame. A star moving towards us can have little proper motion, while a nearer star can show larger proper motion than a faster but more distant one. In the example above, the observed coordinate actually decreases over the first half-year, although $\mu$ is positive: the annual stellar parallax excursion temporarily outweighs the steady drift. A short observed displacement alone therefore need not estimate proper motion well.

Real catalogues give two proper motion components. For right ascension $\alpha$ and declination $\delta$, the angular velocities in perpendicular directions on the local sky areThe cosine factor accounts for the shorter east-west arc associated with a given right ascension increment away from the celestial equator. ESA's Gaia DR3 fields pmra and pmdec already contain these two components; pm is their total proper motion. Do not multiply pmra by another cosine. Components of $60$ and $80\mathrm{mas}\mathrm{y}{\mathrm{r}}^{-1}$, for example, give total proper motion $100\mathrm{mas}\mathrm{y}{\mathrm{r}}^{-1}$. ^[ref].

For nearby stars in the ordinary nonrelativistic approximation, Euclidean distance $d$ converts total proper motion into transverse speed $v_{\perp }$:The small-angle approximation gives transverse speed as Euclidean distance times angular velocity in radians per unit time. With arcseconds and parsecs, the parsec convention turns their product into astronomical units per year. One astronomical unit per Julian year of $365.25$ days is approximately $4.74047\mathrm{km}{\mathrm{s}}^{-1}$. The coefficient is a unit conversion, rather than a property of a particular star.

Taking the model's $100\mathrm{mas}\mathrm{y}{\mathrm{r}}^{-1}=0.100\mathrm{arcsec}\mathrm{y}{\mathrm{r}}^{-1}$ as the total proper motion, with the other component zero, gives $v_{\perp }=4.74047\times 0.100\times 20\simeq 9.48\mathrm{km}{\mathrm{s}}^{-1}$. At the same total proper motion, Euclidean distances of $10$, $20$ and $100$ parsecs instead give transverse speeds of $4.74$, $9.48$ and $47.40\mathrm{km}{\mathrm{s}}^{-1}$, respectively. Their stellar parallax values are $100$, $50$ and $10\mathrm{mas}$. The same annual angular displacement can therefore describe quite different journeys through space.

The transverse speed still omits the line-of-sight velocity, which can be measured through the Doppler effect in spectral lines. Combining these measurements permits a three-dimensional velocity estimate in a consistent reference frame. ^[ref].

Historically, Edmond Halley's 1718 paper compared contemporary and ancient stellar directions and argued that some supposedly fixed stars had moved. Its title, "Considerations on the change of the latitudes of some of the principal fixt stars", captures the conceptual surprise: long-separated measurements could reveal motion invisible in an ordinary night's watching. Modern astrometry retains that insight, using repeated precise measurements to turn the apparently static sky into a record of changing positions. ^[ref]. ^[ref].

Right ascension $\alpha$ is the eastward angle along the reference celestial equator from the reference equinox to a direction's hour circle, conventionally reduced to $0\le \alpha <24^{\mathrm{h}}$. Its hours label angles: $24^{\mathrm{h}}=360^{\circ }$, $1^{\mathrm{h}}=15^{\circ }$, $1^{\mathrm{m}}=15^{\prime }$ and $1^{\mathrm{s}}=15^{\prime \prime }$. Thus $6^{\mathrm{h}}30^{\mathrm{m}}=97.5^{\circ }=13\pi /24$ radians. A minute of right ascension differs from a minute of arc, and the actual arc on a fixed-declination parallel also contains the cosine factor described under declination.

The hours become useful through sidereal time. At local sidereal time $8^{\mathrm{h}}$, a synthetic direction of right ascension $6^{\mathrm{h}}30^{\mathrm{m}}$ has west-positive hour angle $1^{\mathrm{h}}30^{\mathrm{m}}=22.5^{\circ }$ and has passed its upper meridian transit. Conversely, at $5^{\mathrm{h}}30^{\mathrm{m}}$ it has hour angle $-1^{\mathrm{h}}$ and has yet to cross. Interpret these intervals in sidereal hours; ordinary civil hours are not interchangeable with them. The right ascension of the upper celestial meridian advances as the Earth turns, while the synthetic fixed target's right ascension stays unchanged.

An instrument makes this geometry tangible. DePauw University's description of McKim Observatory documents a meridian optical telescope with an angular circle, astronomical clocks and a chronograph. The circle measures zenith distance, and the crossing time supplies right ascension. Clock pulses and the observer's electrical key mark a rotating paper record, so crossing time is read relative to the clock marks. One clock kept sidereal time and another solar time. This apparatus separates two measured quantities: when a star crosses the celestial meridian, and at what angle from the zenith. ^[ref].

A teaching reconstruction would fix an optical telescope to sweep the celestial meridian, align its central sighting line, and observe a recognizable reference star followed by a target. Record each central-line crossing against a clock or timestamped camera, and read the angular circle at upper meridian transit. A short sequence shows the image moving across the stationary sighting line; the central crossing supplies a repeatable event. In the ideal model, successive upper crossings of a fixed direction recur once per sidereal day, and directions with increasing right ascension cross later in the same cycle. These are predictions for the reconstruction, rather than reported McKim measurements. Tatum derives the equality between local sidereal time and right ascension at upper meridian transit. ^[ref].

Calibrate the clock's zero by comparing its reference crossing readout $C_r$ with the reference star's predicted apparent right ascension ${\alpha }_r$ in the same date convention: the additive correction is $b={\alpha }_r-C_r$, modulo $24^{\mathrm{h}}$. Then infer target right ascension ${\alpha }_t=C_t+b$ if the clock rate is correct between crossings. In a purely synthetic example, ${\alpha }_r=6^{\mathrm{h}}00^{\mathrm{m}}00^{\mathrm{s}}$ and $C_r=6^{\mathrm{h}}00^{\mathrm{m}}20^{\mathrm{s}}$ imply $b=-20^{\mathrm{s}}$. A target readout $C_t=6^{\mathrm{h}}30^{\mathrm{m}}20^{\mathrm{s}}$ therefore gives ${\alpha }_t=6^{\mathrm{h}}30^{\mathrm{m}}00^{\mathrm{s}}=97.5^{\circ }$. The $20^{\mathrm{s}}$ clock offset is $300^{\prime \prime }$ in right ascension, while its local east-west angular effect at declination $60^{\circ }$ is approximately $150^{\prime \prime }$. The reference and target in this calculation are invented directions, with no claim about any current star's coordinates.

Controls give the inference its meaning. Use independently established geographical latitude and an angular-circle zero for declination; check sighting-line alignment against several reference stars, and bracket the target in time with references to reveal clock drift. Record north or south of the zenith, distinguish upper from lower meridian transit, and account for atmospheric refraction. Convert the observing timestamp to local sidereal time using the site's east-positive longitude correction, rather than a time-zone offset; precise conversion uses the Earth's measured rotation time. A reference star calibrates a zero only after its catalogue direction has been converted to the observation convention. Repeated crossings reduce random measurement error, while an incorrect clock rate, axis alignment or catalogue convention remains a systematic limitation. ^[ref]. These controls are requirements inferred from the geometric and clock model, not a claimed historical observing log.

Local sidereal time is the right ascension on the upper celestial meridian. A sidereal day is approximately $1436.07$ minutes; its angular rate is $2\pi /T_{\mathrm{sid}}$. Mean and apparent sidereal time must be paired with corresponding equatorial coordinate systems.