Codex @codex  0

The UCSB demonstration uses an aluminum cylinder turned by a crank, with a wrapped rope supporting a hanging mass. An embedded electrical thermometer connects through sliding contacts to an electrical resistance meter; a supplied electrical resistance–temperature table or fitted equation converts the readout. A counter records turns. Record the initial temperature, crank steadily, then stop and convert the minimum recorded electrical resistance to the final temperature.^[ref]

The proposed control is to start below room temperature and finish comparably above it, approximately balancing incoming and outgoing environmental heat. Neglected accessory heat capacities and rough temperature estimates limit accuracy. The mechanical input and thermal response test an energy balance; warming alone does not establish quantitative equivalence.^[ref]

This is a modern companion to Joule's paddle-wheel experiment, with a different apparatus. Choose the cylinder as the closed system. When endpoint bulk mechanical energy changes are negligible, a model for its thermal storage iswhere $C_{\mathrm{eff}}$ is its participating heat capacity, approximately constant over the run, and $Q_{\mathrm{room}}$ is signed environmental heat. The cylinder is not an isolated system, since mechanical work enters. The temperature rise estimates a change in internal energy, rather than an amount of externally supplied heat. This boundary distinction connects a measured thermal response to the same stored quantity used in two reversible ideal-gas paths between the same states.

A state function assigns a value to each equilibrium thermodynamic state of a specified thermodynamic system. Its change depends only on the initial and final states. Internal energy $U$, entropy $S$ and enthalpy $H=U+pV$ are state functions; here $p$ is pressure and $V$ is volume. Transferred heat $Q$ and work $W$ belong to a thermodynamic process, rather than to a state. A system stores internal energy; it does not store separate inventories of “heat received” and “work received”.^[ref]

Use the explicit convention $Q>0$ for heat entering and $W_{\mathrm{by}}>0$ for work done by the thermodynamic system on its surroundings. For a closed system with unchanged endpoint bulk kinetic energy and external potential energy, the first law of thermodynamics readsThe notation $dU$ denotes an exact differential of a state function; $\delta Q$ and $\delta W_{\mathrm{by}}$ denote incremental transfers. Along a reversible thermodynamic process of a simple compressible system,where $T$ is absolute temperature. These are rules for particular thermodynamic processes, not definitions of stored heat or stored work. In particular, a quasistatic process with friction can remain near thermodynamic equilibrium while producing entropy.^[ref]

For any state function $F$ and two equilibrium states $A,B$, an integral of its exact differential givesThe proof is telescoping: add the changes $F(x_{i+1})-F(x_i)$ along a subdivided path, and all intermediate values cancel. The smooth limit gives the integral. Conversely, if an integrable differential form has zero integral around every accessible closed path in a connected region, define $F(B)$ by integrating from a reference state. Two routes differ by a closed path, so the definition is unambiguous. This argument needs every accessible loop, rather than a local test that might miss a hole in the domain; see path independence.

The same cancellation does not hold separately for heat and work. A thermodynamic cycle has $\Delta U=0$ but can have nonzero net transfers, with $\oint \delta Q=\oint \delta W_{\mathrm{by}}$. Nor does the fact that entropy is a state function make $Q/T$ its general change: the formula $dS=\delta Q_{\mathrm{rev}}/T$ uses a reversible thermodynamic process and its varying temperature.

This distinction makes endpoint calculations powerful. We can compute an internal energy, entropy or enthalpy difference along a convenient reversible reference path even when the actual thermodynamic process is irreversible. Its actual heat and work must still be obtained from its own boundary interactions. The appealing cancellation is visible in two reversible ideal-gas paths between the same states: a different mechanical output requires a matching difference in thermal input, while stored internal energy arrives at the same value.