Pulmonary plexus Created 2026-10-31 Updated 2026-11-05
The pulmonary plexus is a network of autonomic and sensory pathways associated with the roots of the lungs and airways. Vagal and sympathetic contributions connect central regulation with local airway and vascular targets.
Pulmonary trunk 2026-11-05
The pulmonary trunk is the common artery leaving the right ventricle through the pulmonary valve before dividing into the vessels supplying the two lungs. It is the initial shared segment of the pulmonary artery route in the pulmonary circulation. The name artery describes flow away from the heart; the blood in the pulmonary trunk has not yet acquired oxygen in the lungs.[ref]
At a junction with negligible storage, conservation of mass givesA constructed total blood flow of L/min could therefore divide into and L/min. Measuring the total does not establish equal flow to the two lungs. In a simple steady model with a common upstream and downstream pressure, branch blood flow rates depend on their respective vascular resistance values; the shared inlet does not force the resistances to be equal.
The pulmonary trunk also supplies an important distinction between two measurements. Right ventricular ejection fraction describes change in a chamber volume, whereas forward blood flow in the pulmonary trunk describes transport through a vessel. They agree through stroke volume and heart rate only under the relevant balance assumptions, including negligible backward flow. An anatomical connection is therefore the starting point for a flow model, rather than a substitute for its assumptions.
Pulmonary tuberculosis 2026-10-31
Tuberculosis affecting the lung.
Pulmonary vein 2026-11-05
A pulmonary vein returns blood from a lung to the left atrium. The pulmonary veins complete the return side of the pulmonary circulation, after blood has received oxygen in the lungs. They are veins because they carry blood toward the heart, even though their oxygen content is higher than that of the blood arriving through the pulmonary artery.[ref]
Following a parcel of blood makes the sequence clear: right ventricle, pulmonary trunk, vessels of the lungs, pulmonary vein, left atrium, then left ventricle. The pulmonary vein connects the lung circuit to the receiving chamber of the left heart; it does not drain directly into the right atrium.
A simple oxygen balance illustrates why both content and flow matter. Suppose two returning streams have blood flow rates and oxygen contents . If they mix without further oxygen exchange, the left atrium's inflow content isFor constructed values L/min, L/min, and mL/mL, this gives mL/mL. An unweighted average would give mL/mL. A specimen's vessel connections establish where the streams meet; conservation of mass establishes how their transported oxygen combines.
Pulmonary ventilation Created 2026-10-24 Updated 2026-11-05
Pulmonologist 2026-11-05
A pulmonologist is a physician specializing in diseases of the lungs, conducting airways and related respiratory function. The work connects clinical observations with respiratory mechanics, ventilation and gas exchange. The American Board of Internal Medicine's primary specialty standards include supervision and interpretation of pulmonary-function testing, ventilator-related skills and bronchoscopy.[ref]
Pulmonary Disease by the American Board of Internal Medicine. Training and Procedure Requirements, pulmonary-function testing and bronchoscopy competencies
The scientific question determines the measurement. Spirometry records gas moved at the mouth. Lung compliance relates volume to an internal pressure difference. Gas exchange also depends on the exchange surface and blood flow, so an expired-volume trace does not by itself measure every part of respiratory performance. A pulmonologist interprets these complementary observations alongside the clinical context rather than treating all breathing measurements as interchangeable.
An original ventilation example illustrates why this distinction matters. Let tidal volume be , respiratory rate be , and non-exchanging conducting-airway volume be , representing anatomical dead space. In a simplified model where the remaining inspired gas reaches functioning exchange regions,The first is total ventilation per minute; the second is the model's alveolar ventilation. OpenStax distinguishes conducting-airway dead space from gas available to alveolar exchange.[ref]
Anatomy and Physiology 2e by J. Gordon Betts and others. §22.3, Respiratory Volumes and Capacities, anatomical and alveolar dead space
With stipulated L, twelve breaths per minute at L give total ventilation 6 L/min and alveolar ventilation 4.2 L/min. Thirty breaths per minute at L still move 6 L/min in total, but give only 1.5 L/min in this model. Equal total movement can therefore supply quite different amounts of fresh gas to exchange regions. These chosen numbers explain the quantities; they are not a breathing recommendation or a patient assessment.
Measurement quality is part of the specialty's scientific reasoning. The primary spirometry statement separately evaluates instrument response, maneuver acceptability and repeatability.[ref]
Standardization of Spirometry 2019 Update by Brian L. Graham and others. Device Quality Assurance and FVC Maneuver
A precise measurement of one function can be informative while leaving the cause of an abnormal result unresolved. Combining anatomy, mechanics and exchange measurements makes those remaining questions explicit. Re-expansion pulmonary oedema Created 2026-10-31 Updated 2026-11-05
Pulmonary oedema occurring after re-expansion of a previously compressed or collapsed lung. It connects a change in lung mechanics with vascular leakage and differs from simply assuming all edema reflects cardiac failure.[ref]
Pleural Procedures by the British Thoracic Society (2023). Complications of pleural drainage
Residual lung volume 2026-11-05
Residual lung volume, RV, is the gas remaining in the lungs after maximal expiration. It is smaller than the quiet end-expiratory functional residual capacity by the expiratory reserve volume:Thus residual gas is not the tidal volume or a direct measurement of gas exchanged in one breath.[ref]
Standardisation of the measurement of lung volumes, 2023 update by Nirav R. Bhakta and others. Definitions and subdivisions of lung volume; Figure 1
For stipulated FRC 2.5 L and expiratory reserve volume 1.1 L, RV is 1.4 L. Since spirometry records changes rather than an absolute lung-gas baseline, exhaling into a spirometer cannot by itself identify the gas still inside.
The 1956 experiment by Arthur B. DuBois and colleagues made that hidden volume accessible through body plethysmography. Their apparatus combined an airtight chamber, a mouthpiece shutter, capacitance pressure transducers and an oscillograph. Respiratory efforts against the closed shutter related mouth-pressure changes to changes in chamber volume.[ref]
A rapid plethysmographic method for measuring thoracic gas volume by Arthur B. DuBois and others. Pages 322–324, Method, Figure 1 and equations 1–7
The physical idea follows Boyle's law. For a fixed gas amount at approximately fixed temperature, writeTo first order in the small changes,An original ideal calculation uses effective gas pressure 100 kPa, pressure increase 0.2 kPa and volume decrease 4 mL, giving mL. This estimates the gas volume at the instant of airway closure. If closure occurs at quiet end-expiration, the result corresponds to an FRC-level measurement; expiratory reserve volume must still be subtracted to obtain residual lung volume. Pressure equilibration, thermal assumptions and correct volume conventions are part of the physical measurement, not consequences of the algebra alone.
Respiratory medicine Created 2026-10-31 Updated 2026-11-05
The branch of medicine concerned with breathing, gas exchange and respiratory disease. Airflow, lung expansion, diffusion and blood flow can each limit respiratory performance through different mechanisms.
Respiratory-system compliance 2026-11-05
Respiratory-system compliance is the change in volume per change in elastic pressure across the passive lung and chest wall together. For a local static relation,Lung compliance alone instead uses transpulmonary pressure, . The whole-system and lung-only quantities are different even when they refer to the same volume change.
At that shared volume, the elastic pressure increments add. With component compliances and ,The reciprocals are component stiffnesses; respiratory-system elastance is . For positive component compliances, the combined value is smaller than either component. OpenStax describes opposing lung and wall recoil and their pressure references.[ref]
Anatomy and Physiology 2e by J. Gordon Betts and others. §22.3, pleural pressure and thoracic wall compliance
An original example uses and . The combined compliance is about 0.0667 in the same units. An added 0.50 L requires 2.5 cm water of lung elastic pressure and 5 cm water of wall pressure, totaling 7.5 cm water. Attributing that total entirely to the lung would underestimate lung-only compliance threefold.
In a passive ventilated-breath measurement, a zero-flow plateau airway pressure can be compared with the appropriately measured end-expiratory pressure. Under the stated equilibrium and no-effort assumptions, an interval estimate isFor stipulated L, and cm water, this is again about 0.0667. The baseline must account for the relevant positive end-expiratory pressure; a pressure measured during nonzero flow also contains a resistive contribution. The primary pilot study explicitly compares pressure-based respiratory-system estimates under passive ventilation.[ref]
Static and Dynamic Measurements of Compliance and Driving Pressure: A Pilot Study by Pierre Tawfik and others. Introduction, Methods A–D; Study Procedures
State whether the number is a local slope or an interval ratio, which pressure references were used, and whether muscle activity and flow were excluded. Separating lung and wall contributions requires internal pressure information beyond the whole-system volume response.
Respiratory-system elastance 2026-11-05
Respiratory-system elastance is the local increase in passive elastic pressure per increase in respiratory volume. It is the reciprocal of local respiratory-system compliance:Its units are pressure per volume, such as or . A larger elastance means that the same small volume increment needs a larger elastic pressure increment.
The lung and chest wall share a volume increment while their pressure increments add. Thus their elastances add,whereas their compliances do not. For stipulated and , the elastances are 5 and 10, totaling 15 in reciprocal units. Combined compliance is . The underlying pressure partition is distinct from attributing all measured stiffness to the lung.[ref]
Pulmonary Function Testing by Warren M. Gold and Laura L. Koth. Lung Elasticity, pressure references and compliance
Elastic work in a pressure-volume model gives another meaning to stiffness. Around a passive zero-recoil equilibrium, let added volume be and pressure with constant elastance. The reversible work needed to move from zero to isFor an original SI example, and give final pressure 500 Pa and elastic work 0.125 J. Doubling elastance at the same volume doubles this work; doubling volume at fixed elastance quadruples it. Resistive losses and active muscle work are outside this ideal elastic calculation.
If the pressure-volume curve is nonlinear, local elastance can differ from the interval ratio . Its reciprocal corresponds to the local compliance at that state, not an average across an arbitrary range. A primary ventilator study compared different pressure-volume methods under passive conditions, making this measurement definition operational.[ref]
Static and Dynamic Measurements of Compliance and Driving Pressure: A Pilot Study by Pierre Tawfik and others. Figure 1, methods A–D
Report volume range, passive conditions and whether the value is a derivative or a secant. Thoracic surface anatomy Created 2026-10-31 Updated 2026-11-05
Thorax Created 2026-10-31 Updated 2026-11-05
The thorax is the trunk region between neck and abdomen. Its rib cage and associated muscles surround the lungs and mediastinum, while the respiratory diaphragm forms the lower partition. Movement of its boundaries contributes directly to breathing.
Total lung capacity 2026-11-05
Total lung capacity, TLC, is the volume of gas in the lungs after maximal inspiration. It combines residual lung volume with vital capacity, or equivalently functional residual capacity with inspiratory capacity:The equivalent subdivision is , using expiratory reserve volume, tidal volume and inspiratory reserve volume.[ref]
Standardisation of the measurement of lung volumes, 2023 update by Nirav R. Bhakta and others. Definitions and subdivisions of lung volume; Figure 1
A constructed example assigns 1.2 L to residual lung volume, 1.0 L to expiratory reserve volume, 0.5 L to tidal volume and 3.3 L to inspiratory reserve volume. Their sum gives TLC 6.0 L. The vital capacity is 4.8 L, functional residual capacity is 2.2 L, and inspiratory capacity is 3.8 L. Each identity gives the same total because the compartments share consistent endpoints.
A spirometry trace alone measures changes at the mouth; it does not establish the volume remaining after complete expiration. Adding an arbitrary constant to the entire gas-volume trace leaves every observed inhaled and exhaled increment unchanged. An independent estimate of residual lung volume or functional residual capacity is therefore needed to fix that offset. The measurement standard obtains capacities by combining an FRC measurement with linked volume maneuvers.[ref]
Standardisation of the measurement of lung volumes, 2023 update by Nirav R. Bhakta and others. Background and purpose; Measurement of FRC
This distinction also explains why vital capacity and total lung capacity are not interchangeable descriptors. Two hypothetical systems can both have a 4 L vital capacity, while having residual lung volume 1 and 2 L respectively. Their total capacities are then 5 and 6 L. The arithmetic separates the amount that can be exchanged during the maneuver from the amount present at full inspiration.
Vein Created 2026-10-31 Updated 2026-11-05
Ventilator 2026-11-05
A ventilator is a machine that assists or replaces pulmonary ventilation by supplying a controlled gas-delivery path to the lungs. The interface can be a mask or a breathing tube; the machine and interface together support mechanical ventilation.[ref] Gas delivery, oxygen concentration and respiratory mechanics remain distinct parts of that support.
A useful engineering description separates the commanded quantity from the measured response. A machine can regulate an applied pressure or a flow history while monitoring pressure and gas volume. Its displayed or reconstructed quantities depend on sensors, timing and the selected model. The manufacturer's treatment of plateau airway pressure, for example, distinguishes a hold measurement from computed monitoring estimates and states conditions under which they are available.[ref]
Measured values for Ppeak and Pplateau by Hamilton Medical. Principles of measuring plateau pressures; Monitoring parameter Pplateau
An original circuit example shows why upstream delivered volume need not equal the volume entering the patient. In a simplified volume balance,If a stipulated source supplies 0.50 L, ventilator circuit compliance stores 0.04 L during pressurization, and 0.06 L escapes through a leak, only 0.40 L reaches the modeled patient compartment. This is an illustrative uncompensated circuit, not a description of every ventilator's displayed tidal volume.
The stored term can be approximated as . A stipulated compliance of 2 mL/cm HO with a 20 cm HO pressure rise gives the stated 40 mL. Measuring volume at another location, or compensating for known circuit properties, changes what is being reported.
A ventilator consequently supplies an experimentally testable physical system: gas path, actuation, sensors and control logic. A pressure or volume setting alone is not a complete observation of alveolar gas renewal, especially when flow, leakage or circuit storage changes.
Vital capacity 2026-11-05
Vital capacity, VC, is the volume change between maximal inspiration and maximal expiration. It is the exchangeable difference between total lung capacity and residual lung volume:The sum uses inspiratory reserve volume, tidal volume and expiratory reserve volume.[ref]
Standardisation of the measurement of lung volumes, 2023 update by Nirav R. Bhakta and others. Definitions and subdivisions of lung volume; Figure 1
A constructed volume record with maximum 6.0 L and minimum 1.4 L gives VC 4.6 L. Subdivisions 3.0 L, 0.5 L and 1.1 L give the same result. Those increments partition the full excursion; none includes the 1.4 L that remains after maximal expiration.
Forced vital capacity names a specific forceful expiratory maneuver. The broader vital capacity can also be measured during a relaxed expiration or inspiration. The maneuver and completeness of its endpoints matter when comparing measurements.[ref]
Standardisation of the measurement of lung volumes, 2023 update by Nirav R. Bhakta and others. Definitions and subdivisions of lung volume, inspiratory VC, expiratory VC and FVC
[ref]Standardization of Spirometry 2019 Update by Brian L. Graham and others. FVC Maneuver; end-of-forced-expiration considerations
A spirometry trace records volume change, so the same VC can arise at different absolute lung-gas levels. A second stipulated record spanning 7.0 to 2.4 L also gives 4.6 L. Adding a common offset to every point leaves VC unchanged. This is why a precise vital capacity measurement alone cannot determine residual lung volume or total lung capacity.
Warren M. Gold 2026-11-05
Warren M. Gold, with Laura L. Koth, coauthored Pulmonary Function Testing, a technical account of how respiratory measurements relate to the mechanical and gas-exchange behavior of the lungs.[ref]
Pulmonary Function Testing by Warren M. Gold and Laura L. Koth. Primary chapter byline and sections on lung volumes
The contribution is a quantitative synthesis of methods and their interpretations; the jointly authored chapter does not assign its individual methods to one coauthor.An important distinction is between a change in lung gas volume and the absolute amount left behind after expiration. The chapter explains that spirometry measures volume changes, while residual lung volume requires an indirect determination. It also shows that reduced vital capacity can accompany different underlying volume configurations.[ref]
In an original inventory example, let total capacity be and residual volume be . The available change between those endpoints isThe pairs L and L both give L. Measuring the same volume change does not identify which absolute-volume pair produced it. Adding an arbitrary constant to both endpoints leaves their difference unchanged.
A separate measurement that constrains one endpoint can remove that particular ambiguity. For example, knowing L as well as L gives L. That does not make every indirect volume method interchangeable: tracer equilibration, pressure/temperature conventions and communicating compartments still enter their measurement models.
Gold's documented technical work helps distinguish the physiological quantity from its instrument signal. More reproducible measurements of an unchanged difference cannot recover an unknown offset merely by averaging. The observed quantity, the supplementary information and the model connecting them all belong in a scientific account of a lung-function test.