For a clean spherical gas bubble with negligible internal dynamic viscosity and thermal conductivity, a weak temperature gradient produces the displayed migration velocity, where . The exterior Papkovich–Neuber representation can use only the scalar potential . Its surface normal velocity equals , and its tangential traction balances minus the surface surface tension gradient from the temperature dipole around an insulating sphere. For the usual the bubble moves toward warmer liquid. Small Reynolds number, Péclet number, capillary number, and fractional surface-tension variation justify the approximation; surfactants can oppose the temperature-driven Marangoni stress.
The lower bound makes internal vertical velocity variation negligible; the upper bound makes internal in-plane extensional stress negligible compared with ambient traction. Both are needed for an ambient-controlled interfacial plug current.
Viscous force 2026-10-18
The viscous force on a fluid region is the resultant of the traction supplied by the viscous stress tensor . With the outward unit normal of the region, its surface contribution is the displayed surface integral. For an incompressible Newtonian fluid, , where is dynamic viscosity and is velocity. A force scale is for a body of size moving at speed , while the inertial force scale is ; their ratio is the Reynolds number. Total hydrodynamic drag on a body includes both viscous traction and the pressure traction induced by the flow. For example, the full Stokes drag law gives for a no-slip sphere, rather than just the viscous-traction part alone.
Viscous stress tensor Created 2026-09-28 Updated 2026-10-14
The viscous stress tensor is the part of the Cauchy stress tensor associated with deformation rates. For an isotropic Newtonian fluid in incompressible flow,
Here is pressure, is the identity matrix, is dynamic viscosity, and is the strain-rate tensor. The convention is ; denotes transpose and denotes trace. Across a plane with unit normal vector , the viscous traction is . The tensor makes this rule work for any plane orientation. [ref]
In the worked Couette flow, , so
In particular, while the shear rate is ; the factor in recovers . On the upper face of a fluid slice, gives viscous traction ; on the lower face it is . Constant stress can therefore transmit a force between the plates even though its divergence, and the net viscous force on each slice, vanish.
Compare planar extension with solid-body rotation :
Extension changes lengths and produces viscous normal stresses . Rotation preserves distances and gives zero viscous stress, despite its nonzero velocity gradient and vorticity . For and , extension gives and ; rotation gives zero. A rotating fluid may still have a pressure gradient supplying its centripetal acceleration.
Figure 1.
Deformation produces Newtonian viscous stress; rigid rotation does not
. Blue arrows show instantaneous velocity. The dashed square is a material patch at ; its orange outline at is obtained from the exact trajectories of planar extension and solid-body rotation, with . The marked corner makes rotation visible. Both motions preserve area, but only extension changes the patch's shape. Details.
For an isotropic Newtonian fluid in three-dimensional compressible flow, separate shape change from volume change:
The first term is deviatoric stress, with zero trace; is volume viscosity, also called bulk viscosity. For uniform expansion , and , so the shear contribution vanishes and the viscous stress is . Thus dynamic viscosity and volume viscosity describe distinct responses, and incompressible flow removes only the volume-change term. [ref]
For a Newtonian fluid and a flat wall with , the Navier slip boundary condition is equivalent to a tangential wall-on-fluid traction
The sign expresses resisting friction: uses the inward unit normal, whereas the wall-on-fluid traction uses the outward unit normal of the fluid domain. The irreversible loss of mechanical energy per unit wall area and time is
For two tangential directions replace by the squared Euclidean norm of relative tangential velocity. At a moving wall this relative-velocity loss must be distinguished from the power supplied by the wall's motion. Bulk viscous dissipation also remains present. A finite slip length models reduced interfacial resistance, without declaring every boundary ideal or removing dynamic viscosity.
The limiting loss depends on how the flow is driven. In Couette flow with a slipping lower wall,
It tends to zero for both and at fixed and . At impose the no-slip boundary condition directly, rather than dividing by zero. In planar Poiseuille flow with equal wall slip at fixed , each wall instead dissipates , which grows with because relative velocity grows. The bulk loss per unit width is ; adding both wall losses gives , the pressure work per unit channel length and width. This energy balance shows why small friction coefficients do not guarantee small losses under every driving constraint.
Wall shear stress 2026-10-14
For a stationary flat plate in a Newtonian fluid, the streamwise shear stress exerted by the fluid on its upper face is
The sign here is positive when the fluid pulls the plate downstream; the plate exerts the opposite tangential traction on the fluid. In a Blasius boundary layer, . A growing boundary layer thickness therefore accompanies decreasing local wall shear stress, because its near-wall velocity gradient becomes gentler. The formal divergence as is integrable, but that leading-edge limit lies outside the thin-layer hypothesis.[ref]
At zero frequency the graded-layer transfer equation integrates to , where . Eliminating the outgoing wave amplitude at the left endpoint gives the displayed incoming-to-outgoing scattering matrix. It is real orthogonal, so it preserves total incoming and outgoing flux. It coincides with continuity of velocity and traction at a sharp seismic impedance interface; the profile between the endpoints enters at nonzero frequency.