For a martingale and a stopping time , expand the stopped value using its martingale differences:
The event belongs to the filtration . Each summand is integrable and its conditional expectation given is zero. Taking expectations of this finite sum therefore proves for every bounded stopping time. This proves the forward direction of the bounded-stopping-time characterization of a martingale without assuming an optional stopping theorem.
The Yoneda lemma, applied to the representing Omega-spectrum spaces in each degree, makes the comparison more explicit. Put
The structure map of supplies , and is the homotopy colimit of spectra of this sequence. The inverse-tower transition on maps into is precomposition with . Under the suspension spectrum adjunction it takes to by taking the adjoint through and the Omega-spectrum identification .
Consequently the maps of represented cohomology theories are exactly the compatible degreewise operations:
Only nonnegative degrees need be listed, since the suspension compatibility recovers the negative degrees. The Milnor exact sequence for maps of spectra gives the sharper description
Thus , with bonding maps coming from the same telescope. For an inverse tower with maps , is the kernel and is the cokernel of
The first comparison quotients by spectrum homotopy; the second quotients by hyperphantom maps. These are different identifications.
A stable map induces a degree-preserving additive natural transformation of represented cohomology theories by postcomposition with in degree . This transformation commutes with the suspension isomorphisms. The resulting map
is onto, but need not be one-to-one. Its kernel consists of hyperphantom maps of spectra: maps for which for every stable map
for every based space and every . Equivalently, they induce zero in all degrees of represented cohomology theory on all based spaces. Therefore
This condition tests arbitrary suspension spectra with negative shifts. Merely testing finite spectra defines a phantom map of spectra, which is a weaker condition. In particular the homology conclusion in Question 5 should not be substituted for the cohomology condition here.
Let be the space of point-set maps of topological spectra. Its underlying set is the first set in the comparison. A member is a compatible collection , rather than independently chosen maps at the levels.
Because the source is cellular and the target is an Omega-spectrum, taking spectrum homotopy classes gives all maps in the stable homotopy category:
Thus the first set maps onto the second. Two point-set maps have the same stable class precisely when they are spectrum-homotopic, using the cellular cylinder and fibrant target. The homotopy must commute with the structure maps throughout; unrelated levelwise homotopies are not the definition.
The tensor-product weight diagram is obtained by adding every ordered pair of defining weights. Each occurs once, while each of the four weights occurs twice, from the two orders of the summands. Zero occurs four times, from the ordered pairs and for . Hence
The dimensions sum to , as required for .
Figure 1.
Tensor-square sp4 weights, including the double diagonal weights and four-dimensional zero space
. Details.
In the defining representation, the diagonal element of the Cartan subalgebra acts on the four standard basis vectors with eigenvalues . Therefore
Their weight diagram is the four-point cross below.
Figure 1.
The four defining-representation weights of sp4
. Details.
For the Adjoint representation, the root-space decomposition gives the eight nonzero weights
each of multiplicity one, and weight zero of multiplicity two from the Cartan subalgebra. Thus its weight diagram is the root diagram with a double zero weight, and its total dimension is .
Figure 1.
Adjoint sp4 weights: the eight roots and the zero weight of multiplicity two
. Details.
Use the basis labels in the preceding diagrams. For each , write with , and define
The contraction satisfies and , so both vectors lie in . They are independent and form a basis of its weight space at .
Thus the bases marked on the weight diagram of are
and the diagram of uses the basis at . Each is complementary to the two kernel vectors because its contraction is . All vectors shown are therefore genuine bases, not merely weight counts. The highest-weight vectors are
The latter is highest because intertwines the dual Lie algebra representation and is its highest-weight vector.
Use the contraction splitting of a defining module tensor a dual symmetric square. For a quadratic polynomial in the dual variables, define
Both maps are intertwiners. The first is the natural tensor contraction; the second uses the invariant tensor . Directly, , so and
The vector lies in and is killed by both positive simple-root operators . It is a highest-weight vector of weight . By Weyl complete reducibility theorem, it generates the corresponding irreducible summand. The Weyl dimension formula for gives , hence , exhausting the kernel. Therefore
The kernel has the nine outer weights of multiplicity one and each inner weight of multiplicity two; the dual summand has just the three weights , each once.
Figure 1.
Weight diagrams and basis labels of the fifteen-dimensional kernel and the dual summand
. Details.
Let be the basis of the defining representation and its dual. On a diagonal element of the Cartan subalgebra their weights are and , with . Use the tensor product and symmetric square basis
Its weight is . For the three repeated weights put
If , the complete weight-space decomposition is
There are six spaces of the first type, three of the second, and three of the third. Their dimensions sum to . The weight diagram below labels every space with all of its basis vectors.
Figure 1.
All weight spaces of the sl3 tensor module, with each tensor-basis vector shown at its weight
. Details.
Use the exterior-power Lie algebra representation:
Reorder wedge factors when necessary and interpret repeated factors as zero. The explicit weight basis of the exterior square of Sym4 for sl2 is
for , and
for . Their weights are and , respectively.
Direct application of the displayed operators gives and the lowering chains
The raising coefficients along the first chain are ; along the second, and . Thus each span is stable and is the required irreducible module. At the common weights , the and vectors are independent; the other weight spaces occur only in the first span. This proves that the ten vectors are a basis of and that the two spans are complementary. The highest-weight vectors are
The weight diagram has weights with multiplicities . An Irreducible Lie algebra representation of the sl2 Lie algebra with highest weight has weights , all of multiplicity one. The top weight therefore forces one summand. Subtracting its formal character leaves weights , each once, which is . By Weyl complete reducibility theorem,
Their dimensions account for the entire module.
Figure 1.
The exterior-square weight diagram and its two irreducible summands; basis labels are defined in part iii
. Details.
Realize the defining sl2 Lie algebra Lie algebra representation as , with , , . A basis of the symmetric power is for , with . Hence the exterior square basis , , has weight .
Collecting equal weights gives the complete weight-space decomposition:
Every one of the ten exterior basis vectors appears exactly once. Thus , with the displayed bases and dimensions.
Write and . A well-posed anisotropic diffusion problem requires to be symmetric positive definite: and . For the normal mode in the source the dispersion relation is
The group velocity vanishes when . Consequently
The requested anisotropic absolute-instability threshold for positive diffusion is
For positive definite diffusion this is also sufficient: the anisotropic Gaussian heat kernel has exponential factor and a prefactor, so its fixed-position growth rate is precisely .
Let the prescribed speed be and let be the positive eigenvalues of . The Rayleigh quotient for gives
Absence of absolute hydrodynamic instability for every direction therefore requires
This is an upper bound on , not a minimum required value. The source's last sentence reverses this monotonicity: reducing the growth parameter always helps, so there is no finite lower threshold guaranteeing absence. If it had asked for instability in every direction, the corresponding condition would be . Without the positive-definite assumption, negative diffusion directions make the forward problem ill posed; a singular diffusion tensor requires a separate transport analysis and does not support the displayed inverse-matrix formula.
Select the causal Green function, zero for ; otherwise the impulse equation permits arbitrary homogeneous additions. Use the spatial Fourier transform convention and the temporal Laplace transform boundary convention . The transformed impulse equation is
If , a literal real-frequency Fourier transform of the growing response need not exist. Its causal inverse instead starts on and is continued from there. For close the frequency contour below; its clockwise orientation and the pole residue give . For the upper closure contains no pole. The remaining inverse spatial transform is a Gaussian integral:
The unit-mass Gaussian heat kernel tends to at , giving the required impulse normalization.
At the advected center , its amplitude is . At a fixed spatial point,
Thus permits growth of the moving wave packet, but it is convective hydrodynamic instability if the fixed-position rate is negative. A positive fixed-position rate is absolute hydrodynamic instability. At its equality threshold the factor decays, explaining the marginal exponential classification. This directly verifies the physically selected Briggs-Bers criterion saddle rather than assuming its accessibility.
Assume , the positive diffusivity requirement for the forward heat kernel. A normal mode of the linear complex Ginzburg-Landau equation gives
For real , the maximum temporal growth rate is . The Briggs-Bers criterion starts the inverse time Laplace transform above the temporal growth spectrum and follows the two spatial roots as its frequency contour is lowered. A contributing spatial pinch point occurs when roots continued from opposite sides of the spatial contour coalesce and prevent its deformation. An arbitrary algebraic saddle is not sufficient without this branch selection.
Here gives
To check the pinch, start at with large. The roots are and initially lie in opposite half-planes. They meet at , giving the causal saddle. Positive imaginary absolute frequency means fixed-position exponential growth. Therefore
For there is no positive temporal growth. At the fixed-position exponential rate is zero; its algebraic prefactor, derived below, decays. When the convective interval is empty.
The source specifies only real coefficients. For , temporal growth is unbounded at high real wavenumber, so the usual causal forward-diffusion construction is ill posed and the above criterion does not apply. For the equation reduces to transport with amplification; its point impulse remains a moving delta, rather than a spreading heat kernel. These cases cannot be included by division by .
Again put . To leading order the oscillator has form , while the second variable has a slow part . Averaging its equation over the fast period gives
The oscillatory forcing of the second variable produces only an order- correction: its leading fast derivative is , whose bounded primitive is . Thus it creates no secular term.
The oscillator solvability condition is the same as in part (i), with replaced by :
Introduce accumulated slow time
The shifted Van der Pol amplitude evolution therefore gives, for ,
Consequently
As before, uniformity for means a fixed bounded slow-time interval on which the envelope stays bounded. For it fails when reaches , with limiting value at . There is no bounded leading approximation covering all such slow times for arbitrary positive .
Put and use the method of multiple scales with . At leading order, , so write with , . The order- equation is
Using , its fundamental sine coefficient is , and its fundamental cosine coefficient forces . Removing these resonant forcings is the solvability condition in the method of multiple scales. Thus the shifted Van der Pol amplitude evolution is
With and , solve by putting . This gives
The uniformly valid leading approximation is on bounded slow-time intervals for which remains bounded. The exact initial derivative is recovered by the first-order correction; the displayed leading expression already satisfies the leading initial data.
There is an important limitation to the source's unqualified time-range wording. Starting from , the amplitude decays for , is constant at leading order for , and grows for . In the latter case the denominator vanishes at
A bounded-amplitude multiple-scale expansion is uniform for , not through its predicted large-amplitude breakdown. For the decaying case every fixed bounded slow-time interval is available; the leading unstable equilibrium at also has bounded amplitude over such intervals. The envelope singularity is a breakdown warning, not a proof that the exact original solution has precisely this blow-up time. The coefficient in the PDF is , correcting the converted TeX's duplicated .
Write locally, with analytic and . The coefficient of in the Modified Bessel differential equation requires . If , its recurrence is , with . Hence
The analytic part is even: an odd-power term in would produce an uncancelled odd-power term under the same differential operator, and the recurrence removes all such terms. Insert a smooth even cutoff equal to one near zero. The smooth part and the exponentially decaying tails give no algebraic large-wavenumber terms after repeated integration by parts. Therefore the logarithmic singularities determine the requested terms. For ,
Thus the Fourier transform of the modified Bessel function K0 has expansion
An independent check follows from the integral representation of the modified Bessel function of the second kind. Integrating first and then setting gives , with exactly these first two terms.
The barred integral in the PDF denotes a Cauchy principal value. With its left side is the convolution , whose Fourier transform is . The right side is on and zero outside; either direct integration or the Fourier transform shift rule gives
Thus, away from the irrelevant single point in the formulation,
By the Fourier transform of the absolute logarithm, the difference has transform ; its two delta terms cancel. Therefore
Its endpoint logarithms are locally square integrable, and at infinity, so it belongs to L2 space. The Hilbert transform multiplier is invertible almost everywhere on this space, proving uniqueness there. Without a decay or function-space condition, one may also add a constant under the symmetric principal-value convention. If the reversed step function were used to retain the printed sign in part (i), this answer would acquire the opposite sign.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact