For a homogeneous continuous-time Markov chain, the holding time in a living state before the next transition has survival probability , where . Indeed, conditional on still occupying that state, the probability of leaving in the next is , so its survival function satisfies and . Integrating gives the mean holding time from a transition intensity matrix:
This is the mean time until any allowed exit from that state, not necessarily the patient's remaining lifetime.
For confidence limits, use the supplied standard error of the corresponding diagonal generator estimate. Changing its sign does not change its standard error, so it is also the standard error of . The delta method, with derivative , gives
The resulting approximate 95% Wald confidence intervals are
The diagonal standard errors already incorporate the covariance among outgoing rates. They should not be replaced by the square root of a sum of squared off-diagonal standard errors, which would silently assume those rate estimates independent.
Alternatively construct a positive rate confidence interval and apply the confidence interval for an inverse rate transformation. Here every normal rate interval has a positive lower endpoint, giving
These approximate intervals are, respectively, , , and years. They are asymmetric because inversion is nonlinear; positive log-rate or likelihood-based intervals could also be inverted. The symmetric delta intervals and the inverted-rate intervals are two legitimate first-order approaches and need not have numerically identical endpoints.
The death state has zero exit rate, so its holding time is infinite. There is no finite mean-sojourn estimate or ordinary finite confidence interval for this structurally absorbing state. All intervals above concern the mean parameter, not a prediction interval for one patient's realized holding time.
The permitted transitions form the following diagram. Each arrow is labelled by its fitted transition intensity in units of inverse years; the absence of an arrow is a structural restriction, not an estimated small effect.
Figure 1.
Five-state model: permitted transitions and fitted rates per year
. Details.
State 1 can move directly to 2, 3 or 5; state 2 can move to 4 or 5; state 3 can move to 4 or 5; and state 4 can move only to 5. There are no recovery transitions, and state 5 is an absorbing state. The rates of leaving the four living states are the sums of their outgoing arrows:
The diagonal generator entries are their negatives, so every row of sums to zero. These diagonal entries are not arrows or negative event rates. For example the direct rate is per year, while death after reaching another state can occur at a much larger rate. The printed fit has no covariates on the intensities, so it estimates one pooled rate system and contains no treatment-effect comparison, despite the trial's treatment randomization. The reported describes the fitted likelihood level; by itself it is not a goodness-of-fit test without a reference or competing model.
Assume the bank account stays positive and write and . Dividing the time- rebalancing equality by gives
The discounted bank account has constant price one. This is exactly the self-financing equality in the discounted market. Equivalently, subtract the corresponding valuation at to obtain the discounted wealth equation in discrete time
This algebra uses only positivity of , and does not require it to be deterministic.
At time , the self-financing portfolio can be valued using the holdings about to be carried over the next period:
Subtracting this from gives the gains identity
Conversely, suppose the gains identity and the valuation hold. Rearranging the identity gives . Comparing with the valuation using shows that rebalancing at costs nothing. Applying this at each rebalancing time recovers the self-financing condition.
A previsible strategy selects using only , before the price changes from time to time occur. Thus these holdings cannot exploit future information.
The self-financing portfolio condition values both the old and newly rebalanced holdings at the same time- prices:
Their equality says that rebalancing uses only the proceeds of selling existing assets: there is no external deposit or withdrawal. In particular, the changes in holdings have zero net cost at the current prices. The holdings for the following period may use the newly available information in .
Define a symmetric bilinear form by pairing with and with , each with value one, and setting all other pairings of basis vectors to zero. Its Gram matrix in the order is
The determinant is one, so this is a nondegenerate bilinear form.
For invariance, put . The nonzero values on distinct basis triples are generated by
and the reversed triples have value minus one. Every value involving , or a repeated basis vector, vanishes. Thus is an alternating trilinear form, explicitly . In particular . By symmetry of , this reads , the defining identity for an invariant bilinear form on a Lie algebra.
Suppose a finite-dimensional Lie algebra representation realized this form as . The Lie theorem says that every finite-dimensional representation of a complex solvable Lie algebra admits a basis in which all representing matrices are upper triangular. A commutator of upper triangular matrices has zero diagonal, hence is strictly upper triangular. Therefore is strictly upper triangular, and its product with any representing matrix still has zero diagonal. It follows that
This is the general fact that trace forms of solvable Lie algebras annihilate the derived algebra. Here , so such a trace form would have , contradicting the constructed value one. Thus the nondegenerate invariant form exists, but no finite-dimensional representation has it as its trace form. Finite dimensionality is implicit in the ordinary representation trace; no trace on arbitrary infinite-dimensional endomorphisms is being assumed.
For this diamond Lie algebra, every bracket lies in , and each of these three vectors occurs as a bracket. Thus its derived algebra is exactly . Inside that subalgebra the only nonzero bracket is a multiple of , so . Centrality of then gives . Hence
In particular it is a solvable Lie algebra, although its lower central series of a Lie algebra does not terminate: . Solvability does not imply nilpotence.
The weakly nonlinear, unsteady and dispersive core terms must enter at the same order. Axial nonlinearity first contributes at , while unsteadiness contributes and transverse-inertia pressure variation contributes . Thus take the distinguished limit
Equivalently, , and the wall-layer condition becomes . These orderings imply the initially stipulated long wavelength, low Strouhal number and large Reynolds number. In the core , so perturbation viscous terms are beyond the retained order.
Subtract the undisturbed fully developed state and scale pressure by . The inviscid core equations are
Put and . At first order and
The wall's normal movement first enters at second order in this scaling, so at both walls. Taking the regular wall limits, where and , gives . The arbitrary constant pressure perturbation can be set to zero.
Define the first-order axisymmetric stream function by and . The axial equation becomes , or . Consequently after absorbing an -independent profile into the background. This proves the annular inviscid-core displacement
It gives exactly the stated core expansion without requiring an explicit calculation of . The factors arise from cylindrical mass conservation.
Scale axial distance with and normal velocity with , while the dimensionless axial velocity has scale . Let ; keep fixed on the asymptotic scales. In the core, the ratio of transverse viscous terms to axial convective terms is of order . A small indentation and the associated displacement create tangential slip of order at the edges of the wall layers.
For a layer of relative thickness , that slip makes axial convection of order , while transverse viscous diffusion is of order . Balancing them gives
Unsteady diffusion gives the equivalent estimate when . Thus a consistent regime supporting thin viscous boundary layers and an inviscid core is
At a location where both imposed unsteadiness and slip vanish, a shear-dominated entrance balance can instead have thickness ; the same strict Reynolds-number condition keeps even that scale below . The reduction below assumes that no wall-layer thickening invalidates the stipulated small thickness. The normal flux displaced by a slip layer is of order , smaller than the retained core flux. Tangential no slip is imposed within these layers, not directly on the leading inviscid core.
Here the drift vanishes at the left endpoint. The outer equation is , giving after applying the right boundary value. The ordinary layer does not balance diffusion and drift: their balance selects instead.
For the square-root boundary layer at a vanishing drift, put . The inner equation is
Matching requires a leading inner amplitude of order , so an inner expansion with an everywhere order-one leading term would be incorrect. This can be seen directly by integrating the original equation once:
The right boundary value determines
In the inner variable the exact representation becomes
The first term enforces , while the second is zero there and matches for large . One would expand this integral in the overlap region, determine successive outer terms from the right boundary, and subtract their common expansion. The endpoint layer has width and an interior peak, while its value at the endpoint remains one. This distinguishes it from the ordinary exponential layers in the two preceding cases.
The negative drift moves the outflow boundary layer to . The first-order outer equation is . It must satisfy the left boundary condition, giving . This tends to two at the right endpoint.
Use . The leading inner equation is , and impose and on matching. Thus , and a leading uniform asymptotic approximation is
For higher accuracy, expand the drift as in the inner equation, solve the successive inhomogeneous equations, and match to outer corrections satisfying zero left endpoint data. There is no need for a left endpoint layer. Choosing the growing exponential at the wrong endpoint would prevent matching and is the reason the layer location matters.
The extension must be compared with the actual contour length, . For the illustrative force and the persistence-length-corrected chain, and . Both are small, so the small-force Langevin function expansion and entropic-extension approximation are consistent. Although the mean extension greatly exceeds the unforced millimetre-scale coil size, it remains far below the maximum contour length; that does not violate the model.
The material axial elongation at this force would be only , illustrating that most of the predicted coil extension is orientation and straightening rather than stretching the backbone. Thus the order-of-magnitude entropic response is internally reasonable within the ideal-chain assumptions, but its numerical optical-force prediction is not unique. Solvent-dependent excluded volume, the unusually large stated contour length, actual trap geometry, and surface interactions all matter to an experimental interpretation.
An optical tweezers force requires the change in optical momentum. Define the optical momentum efficiency by , with all ray geometry and medium-index factors absorbed in and the vacuum light speed. The specified relative refractive index does not determine without bead size and the beam's convergence, waist, and ray directions. A unique exact force is therefore not supplied by these data.
Retaining the entropic stiffness from part (a), the parameterized answer is
Using the persistence-length-corrected worm-like chain instead gives in its small-force regime.
For a definite scale estimate, take the weak-contrast optical momentum change to be . This gives , for part (a)'s model, or for the corrected chain. These are estimates with an explicitly chosen ray-momentum efficiency, not a universal formula for a transparent trapped sphere.
Another illustrative optical model makes the uncertainty visible: normal-incidence Fresnel reflectance is . An effective reflector with in the simple momentum convention gives and extensions or , respectively. A refracting bead in a focused beam is not just that reflector; entry and exit rays also transfer momentum. Neither estimate eliminates the missing optical geometry.
The smallest admissible axial stretch is , where the two branches merge and . The current unit fibre vectors are . Their dot product is
At the minimum, both terms in parentheses equal , so
Hence the two families are orthogonal at the maximum possible contraction. There is also a geometric proof of the bound: their reference parallelogram area is , and its current area is , because the in-plane area stretch is . Two unit vectors span area at most one, with equality precisely when perpendicular. This gives and the same equality condition without solving the quadratic. At the minimum is one, so no axial contraction is possible and the fibres are already orthogonal.
For and , the discriminant is strictly positive. The two roots have positive sum and positive product , so both roots are positive and distinct. Each gives exactly one positive and hence a different right stretch tensor. If , neither tensor is the undeformed identity because its third diagonal entry is . Thus two distinct deformed configurations are possible. Excluding removes the case in which one of the two configurations is the undeformed body; it is not needed just for positivity of the roots.
For any trigonometric polynomial of degree at most , reproduction from (a) and the operator norm bound from (b) imply
Taking the infimum over gives
This is the polynomial reproduction error bound with ; attaining the best uniform approximation is not needed for this inequality.
Subtracting the two initial averages of Fourier partial sums gives
because and . The positive normalized Fejér kernel gives the uniform-norm contraction of Fejér summation, namely . The triangle inequality therefore gives
For a trigonometric polynomial , orthogonality of the exponential Fourier modes gives whenever . Every term in the de la Vallée Poussin sum has such an index, so
Here and below .
For a relaxed cluster, galaxy motions act as tracers of its gravitational potential. The virial theorem gives a dynamical mass of order
with a profile-dependent coefficient and a projection correction because the observed velocity dispersion is usually only the line-of-sight component. For an isotropic uniform-sphere estimate using its one-dimensional dispersion, and give . Measured dispersions require much more gravitating mass than the luminous galaxies provide, hence large cluster mass-to-light ratios. Interlopers, orbital anisotropy and departures from equilibrium are systematic uncertainties, so the independent gas and lensing measurements matter.
Let have symplectic basis . Fix and define a symmetric bilinear form on by . The pairings between complementary basis bivectors split this six-dimensional space into three hyperbolic planes, so has signature .
The symplectic group preserves volume and the bivector , obtained from the inverse symplectic form, up to its fixed sign convention. Since , its orthogonal complement has dimension five and signature . On use , which has signature . This constructs the exterior-square double cover of SO0(3,2).
If an element acts trivially on , it also fixes , so its action on the entire exterior square is the identity. Every decomposable bivector then shows that its two-plane is preserved. A line is the intersection of two such planes; hence every line is preserved, and the matrix is scalar. Its exterior-square action forces its scalar square to equal one, giving precisely .
The derivative is injective by the same infinitesimal argument: zero action on forces an infinitesimal scalar, whose induced scalar there is twice its value and therefore zero. The symplectic Lie algebra has dimension , from blocks with symmetric . The orthogonal Lie algebra in five dimensions also has dimension ten. Thus the image is open. Real symplectic polar decomposition has connected compact factor and a contractible positive symplectic factor, so is connected and its image is exactly the identity component:
As in the preceding noncompact cases, this does not identify the quotient with the disconnected full .

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact