Two-layer falling film of equal-density viscous fluids Created 2026-10-14 Updated 2026-10-18
Let the lower fluid have thickness and viscosity , and the upper fluid thickness and viscosity , with common density . For steady flow down a plane inclined at angle , set , . The common hydrostatic pressure is . No slip at the wall, continuous velocity and shear stress at , and zero upper surface shear give and . These follow by integrating in each layer. The stress applied to the lower fluid equals the downslope weight of the upper layer, independent of its viscosity; the upper viscosity affects its shear rate but not that transmitted stress.
For and , the displayed formula retains both inner transverse shear stress and outer normal-velocity resistance. When , almost immobile tangential interfaces create a pressure-driven parabolic flow and . When , the exterior's normal viscous dissipation dominates and . The exact symmetric three-layer Stokes flow dispersion relation isThe term proportional to in its denominator prevents extrapolating a fixed- long-wave expansion uniformly to every large- scaling.
Velocity profile Created 2026-10-05 Updated 2026-11-05
A velocity profile records the variation of velocity across a spatial coordinate, for example across a parallel viscous layer. Its derivative sets the tangential shear stress in a Newtonian fluid, while its integral gives the volume flux.
Viscoelasticity Created 2026-09-24 Updated 2026-11-05
Viscoelasticity combines recoverable elastic response with dissipative and time-dependent response. Two specimens may react similarly to a rapid pull but behave differently when the same load is maintained. In a material creep test, constant stress produces evolving strain; in a stress relaxation test, fixed strain produces evolving stress.
The Maxwell model makes the distinction explicit by placing an elastic spring and viscous element in series. In simple shear strain it obeysAfter a small step to fixed , its shear stress decays as with viscoelastic relaxation time . Under constant shear stress , it instead continues to deform, with . These are predictions of this particular model: a Kelvin-Voigt model has bounded creep and different short-time behavior. Small-amplitude oscillatory shear measures the same competition through storage modulus and loss modulus, rather than assuming that one constant dynamic viscosity characterizes the material.
Viscometric flow Created 2026-10-14 Updated 2026-11-05
A viscometric flow has the local relative deformation history of steady simple shear flow, up to rigid changes of frame. For an isotropic simple fluid, symmetry leaves one shear stress and two independent normal-stress differences. The corresponding viscometric functions depend on the magnitude of the shear rate, while pressure supplies the isotropic part.
Viscous fluid flow Created 2026-09-24 Updated 2026-11-05
Viscous fluid flow includes the transfer of momentum by internal viscous stresses. For an incompressible Newtonian fluid with constant dynamic viscosity , the extra stress is proportional to the rate-of-strain tensor:Combining this relation with momentum conservation gives the Navier-Stokes equation. Other constitutive equations, including those for non-Newtonian fluids, give different stress responses.
A simple example is Couette flow between plates separated by , with one fixed and the other moving at speed . A steady linear profile produces uniform shear stress . The moving plate supplies power per area , which becomes viscous dissipation. [ref]
The Reynolds number compares advective momentum transport with viscous transport. Small values motivate Stokes flow; large values can still require thin viscous boundary layers near solid walls. Viscous flow therefore includes both smooth laminar flow and turbulent flow.
Viscous number Created 2026-09-24 Updated 2026-11-05
Wall shear stress 2026-10-14
For a stationary flat plate in a Newtonian fluid, the streamwise shear stress exerted by the fluid on its upper face isThe sign here is positive when the fluid pulls the plate downstream; the plate exerts the opposite tangential traction on the fluid. In a Blasius boundary layer, . A growing boundary layer thickness therefore accompanies decreasing local wall shear stress, because its near-wall velocity gradient becomes gentler. The formal divergence as is integrable, but that leading-edge limit lies outside the thin-layer hypothesis.[ref]
For the stress-driven stagnation-point boundary layer on , a regular perturbation gives satisfying , and . Reduction of order with the known solution givesIndeed, writing gives ; decay at fixes the lower endpoint and fixes . The integral at zero is , as follows by differentiating the antiderivativeHere is the error function. Thus positive imposed outward shear stress increases the outward surface velocity by the displayed first-order factor. Replacing decay at by decay at while leaving the equation and wall derivative unchanged reverses this coefficient and describes a different problem.
Weissenberg–Rabinowitsch equation Created 2026-09-29 Updated 2026-11-05
The Weissenberg-Rabinowitsch equation recovers the wall shear rate of a generalized Newtonian fluid from a measured pressure-drop versus flow-rate curve. For steady fully developed flow in a horizontal circular pipe with radius , length and no slip, define positive wall shear stressIf is the volumetric flow rate, the wall shear rate isThe derivative samples the local slope of the measured flow curve.
To derive it, momentum balance gives . With and , integrating the velocity profile givesDifferentiating proves the formula. This assumes a local stress/shear-rate relation at the specified measurement conditions; elastic memory or wall slip requires additional modeling.
For a power-law fluid with , , one has andThe Newtonian case recovers . The correction is useful because a non-Newtonian wall shear rate cannot generally be inferred from the Newtonian expression alone.
Yield-stress fluid Created 2026-09-24 Updated 2026-11-05
A yield-stress fluid can sustain a finite shear stress without steady flow, but flows when the applied loading exceeds its yield stress. The ideal Bingham plastic treats the unyielded region as rigid and gives, after yield,Here is the shear rate, the yield stress and the post-yield dynamic viscosity. Real materials can undergo small elastic deformations below the flow threshold; an ideal rigid branch does not describe every part of their response.
A pressure-driven experiment makes the spatial distinction visible. Where the local shear stress is below threshold, a plug flow of a yield-stress fluid can move without internal shearing, while adjacent yielded layers deform. If every point remains below threshold and the walls have no wall slip, the ideal material does not flow. Slowly evolving microstructure and thixotropy make the apparent threshold depend on preparation, waiting time and the loading protocol.