Shear velocity Created 2026-10-05 Updated 2026-11-05
The shear velocity is the velocity scale associated with a shear stress in a fluid of mass density . It is a stress scale, not automatically the actual local fluid velocity at a grain.
Shields parameter Created 2026-10-05 Updated 2026-11-05
The Shields parameter is , comparing bed shear stress with a grain-scale submerged weight per area. Its critical value depends on the assumed drag coefficient, static friction, lift, and contact geometry.
Single-crystal plastic deformation is irreversible shape change of a single crystal, often through dislocation motion on particular slip systems. A slip system specifies a crystallographic plane and a direction within it. Applied loading resolves into a shear stress that drives slip, making the response depend on crystal orientation.[ref]
Under uniaxial stress , the resolved stress on a slip system is , where is the angle between the loading axis and plane normal and the angle to the slip direction. For compatible -degree angles, . Slip begins when the relevant resistance is reached; subsequent deformation can rotate the lattice and change which systems carry further strain.[ref]
Slip-line field theory Created 2026-10-14 Updated 2026-11-05
Slip-line field theory solves certain two-dimensional problems of plastic deformation by constructing two orthogonal families of characteristic curves, called slip lines. Its classical assumptions include plane strain, negligible inertia and body force, and a rigid, perfectly plastic material. The curves are aligned with the directions of maximum in-plane shear stress, rather than the principal stress directions.[ref]
The curve network encodes both the stress field and constraints on admissible velocity. Indentation of a thick workpiece by a rigid flat punch provides a motivating application: the construction predicts a plastic flow region and the load needed to sustain that flow. It is useful because geometry can turn coupled field equations into relations integrated along curves. A slip line is a continuum characteristic, however, not necessarily a microscopic crystal slip system or the actual path of a moving material particle.
Solid Created 2026-10-14 Updated 2026-11-05
A solid resists sustained changes of shape on the timescale being considered. It can support a static shear stress, whereas an ordinary liquid continues to deform under sustained shear. Small loads often produce recoverable elastic deformation; larger loads can cause plastic deformation or fracture.
A solid need not be a crystal. A crystalline specimen has long-range structural order, while an amorphous solid such as ordinary glass lacks the same repeating lattice arrangement. The mechanical classification and the structural classification answer different questions. Applying a small lateral load to the top of a block while holding its base fixed tests shear resistance; a finite shear displacement at static balance is a solid-like response. At long times some solids also creep, so the observation interval and applied stress matter when comparing a material's response with an ideal elastic model.
Stokes's law Created 2026-10-14 Updated 2026-10-20
For an isolated rigid sphere of radius moving at velocity relative to a distant uniform Newtonian fluid, the drag force exerted by the fluid is
The assumptions are steady incompressible flow, constant dynamic viscosity , an unbounded surrounding fluid, the no-slip boundary condition, and a small diameter-based particle Reynolds number, . Integrating the surface traction in translating-sphere Stokes flow gives the factor : the disturbance pressure contributes to the drag magnitude and the viscous shear stress contributes . See Richard Fitzpatrick, Axisymmetric Stokes Flow Around a Solid Sphere, equations 10.120–10.129.
The result is linear drag: doubling doubles the drag force, and doubling at fixed also doubles it. The required power is , all supplied to viscous dissipation. Density enters the check of the particle Reynolds number, although it does not appear in the leading drag formula.
Nearby walls or other particles change the hydrodynamic resistance matrix and invalidate the isolated-sphere coefficient, even at very small Reynolds number. Finite Reynolds number introduces inertia corrections; the Oseen approximation resolves the distant region where the leading Stokes flow approximation ceases to be uniform. A clean gas bubble has tangential slip and instead obeys clean-bubble Stokes drag, with coefficient in its spherical, negligible-internal-viscosity limit. See H. K. Moffatt, Six Lectures on General Fluid Dynamics, section 3.4 for the sphere solution and its small-Reynolds number limitation. The continuum mechanics and boundary assumptions must also remain valid as the particle becomes very small.
Balancing this Stokes drag law against gravity and buoyancy gives the Stokes settling velocity of an isolated rigid sphere.
Strain energy density Created 2026-10-14 Updated 2026-11-05
A strain energy density measures stored elastic energy per unit volume. The volume convention must be specified. For a hyperelastic material, write per unit volume of the reference configuration, where is the deformation gradient. The total stored elastic energy is
with the first Piola-Kirchhoff stress tensor. If , the density per current volume is . At controlled temperature, the corresponding isothermal description uses a suitable free energy.
In uniform small shear strain , a linear elastic material with shear modulus stores . Differentiating with respect to gives the shear stress . Integrating over the specimen gives the work recoverable on elastic unloading. The same construction turns a local material law into a problem in the calculus of variations for a bent or stretched body, subject to its boundary conditions.
Stress Created 2026-09-24 Updated 2026-11-05
Stress describes how internal forces are transmitted across imagined surfaces within a material. Dividing a small contact force by the cut's area gives the traction, a vector that depends on surface orientation. The Cauchy stress tensor collects that dependence through , where is the oriented unit normal vector.
The part of traction perpendicular to a cut is normal stress; its tangential part is shear stress. For uniform axial loading, stress is , measured in pascals, but a general three-dimensional state needs the full tensor. A fluid at rest has in the tension-positive convention, whereas a stretched bar has a preferred loading direction. Changing the orientation of the imagined cut changes its traction without changing the physical loading. This is why one scalar pressure cannot represent every solid stress state.
Stress-driven stagnation-point boundary layer Created 2026-10-25 Updated 2026-11-05
For a fluid occupying , match an outer stagnation point flow to a flat impermeable interface with dimensionless shear stress . With boundary layer thickness , inner variable and , the leading boundary-layer equation admits and . Incompressibility is automatic, and tangential momentum conservation gives the displayed ordinary differential equation, with , and at . The sign of this far-field endpoint is fixed by the fluid domain. This is a prescribed-traction interface; it does not impose a no-slip boundary condition.
Stress relaxation Created 2026-10-14 Updated 2026-11-05
Stress relaxation is decay of stored stress after a deformation is imposed and then held fixed. It probes a material's memory through its relaxation modulus. An instantaneous generalized Newtonian fluid has no stored shear stress once the shear rate is zero and cannot describe a nontrivial relaxation tail.
Stress transformation Created 2026-10-25 Updated 2026-11-05
Resolution of a stress tensor onto differently oriented planes. For two compression-positive principal stresses, the resolved normal stress and shear stress trace a Mohr circle as the plane normal rotates, with double the physical rotation angle.
Suspension rheology Created 2026-09-24 Updated 2026-11-05
Suspension rheology relates particle concentration, particle pressure, shear stress, deformation rate, and fluid migration in a mixture of particles and a liquid.
A tissue-engineering scaffold is a material structure that supplies an initial architecture and local environment for cells in a tissue construct. It can provide attachment surfaces, mechanical support and paths for transport while cells form extracellular matrix. Some designs undergo scaffold degradation; others are intended to persist. A scaffold is therefore part of a developing cell–material system rather than merely a mould shaped like an organ.
Important design variables include material chemistry, biocompatibility, pore geometry, mechanical response and transport. Porosity measures the fraction of volume occupied by voids, but scaffold pore connectivity determines whether those spaces form communicating paths. For example, of solid in a envelope gives porosity . The same porosity could describe connected channels or isolated cavities; the two structures need not admit the same fluid flow or access for cells.
Under an ideal Darcy law model for steady flow through a saturated scaffold slab,
where is the intrinsic permeability, the area normal to flow, the thickness and the fluid’s dynamic viscosity. Taking illustrative , , , and gives . Doubling halves the predicted flow at fixed pressure difference. These chosen parameters are a transport example, not a measured scaffold or a biological operating limit.
The Darcy law calculation averages over the pore network. It does not reveal local shear stress, dead-end pores or gradients of oxygen within the construct. A useful experiment therefore combines measurements of geometry and flow with spatial observations of cell viability and matrix formation, instead of inferring all these properties from porosity alone.
The primary report of functional arteries grown in vitro provides a motivating example of evaluating a constructed tissue by both mechanical and biological criteria.[ref] As the cells add matrix and the starting material changes, the mature construct can differ substantially from its initial scaffold. Scaffold design and bioreactor design must consequently be assessed together: geometry affects transport, and the culture conditions affect the tissue that develops.
Torque reversal of a linear Oldroyd fluid Created 2026-10-14 Updated 2026-11-05
In an inertialess cone-and-plate rheometer, reverse a steady torque from T to -T at time zero. The polymer shear stress remains continuous while the positive solvent viscosity allows the rate to jump. The linear stress equation gives and the displayed velocity for t>0, where . The transient backward speed exceeds the final backward speed because stored polymer stress initially retains its former sign.
A circular elastic layer of thickness bonded between rigid faces develops shear strain under a relative twist . Integrating the shear stress times its moment arm gives . A small relative tilt produces longitudinal strain ; when lateral deformation is constrained, the corresponding normal traction gives . The polar second moment of area is and the diametric second moment of area is . Edge relaxation limits this thin-layer approximation, especially in a nearly incompressible material.
Torsion of a solid circular shaft Created 2026-10-18 Updated 2026-11-05
A circular shaft twisted uniformly through small end angle over length has local engineering shear strain at radius . Its shear stress is , so the integrated torque is , using the polar second moment of area. The restoring torque has the opposite sign to the imposed twist. The stored elastic energy is . The circular cross-section is important: general noncircular sections can warp and have a different torsion constant.
Traction Created 2026-10-05 Updated 2026-11-05
Traction is the force per unit area transmitted across an oriented surface. For unit normal vector , the stress tensor gives . Its normal component is normal stress, and its tangential component is shear stress.
Tresca yield criterion 2026-10-25
The Tresca yield criterion bounds the largest resolved shear stress, expressed through the principal stresses. In spherical symmetry, the two tangential principal stresses coincide, so . Here is a shear yield stress; the corresponding uniaxial yield strength is .
Write the Cauchy stress tensor in the local fibre frame as . The compatible geometry has , and . With zero body force, force balance becomes and . For specified shear stress , the first equation determines along fibres, then the second determines along transverse curves. Pressure and fibre tension supply these two normal constraint reactions. This is a local stress construction; boundary tractions must be chosen consistently with its integration data.
Two-layer Couette flow Created 2026-10-03 Updated 2026-11-05
In two-layer Couette flow, each Newtonian-fluid layer has a linear velocity profile. Continuity of velocity and shear stress at the interface makes the velocity drop across each layer proportional to its thickness divided by its dynamic viscosity.