Past exam of the physics B course of the University of Cambridge / 2018 / Paper 2 / Section B / B6

Magnetic field and force. A steady electric current produces a magnetic field. In vacuum the Biot-Savart law givesThe Lorentz force on the charge carriers transfers force to the material carrying them. The resulting force on a current element of another circuit is $d{\mathbf{F}}_2=I_{2}d{\mathbf{\ell }}_2\times {\mathbf{B}}_1$, or, for a continuous current distribution, the magnetic force per unit volume is $\mathbf{f}=\mathbf{J}\times \mathbf{B}$.

For two long parallel straight wires a distance $r$ apart, Ampère's law gives $B_1={\mu }_0{I}_1/(2\pi r)$. ThereforeThe force is attractive for parallel currents and repulsive for opposite currents, by the cross product rule. Its units are $\mathrm{N}{\mathrm{m}}^{-1}$. This approximation neglects wire thickness and end effects; a complete circuit includes its return current. Element-by-element forces need not form an isolated Newton's-third-law pair, but complete stationary circuits have balanced mutual forces when the entire system is included.

Energy description. For two linear coupled circuits the magnetic energy isHere $q$ is a mechanical coordinate and $M$ the signed mutual inductance. At prescribed currents, the generalized force is $I_1{I}_2\partial M/\partial q$ if the self-inductances do not vary. This positive derivative is obtained from magnetic coenergy, or by including the electrical sources' work; differentiating $W_B$ with a minus sign at fixed currents would omit that source work. At prescribed flux linkages the force instead equals the negative derivative of stored magnetic energy with those linkages fixed. The geometry thus determines both inductance and mechanical force.

Integral conservation. Electric charge cannot be created by ordinary transport. For a fixed volume $V$, outward current reduces the enclosed charge:Here ${\rho }_e$ has units $\mathrm{C}{\mathrm{m}}^{-3}$ and $\mathbf{J}$ has units $\mathrm{A}{\mathrm{m}}^{-2}$. Applying the divergence theorem to an arbitrary volume gives the local continuity equationIt is local charge conservation: a net outflow must be accompanied by depletion. In a steady state, $\nabla \cdot \mathbf{J}=0$. Integrating over a small circuit junction then gives Kirchhoff's current law. During a transient the junction can accumulate charge and the incoming and outgoing conduction currents need not yet match.

Consistency with Maxwell's equations. In vacuum, take the divergence of the Ampère-Maxwell equation:Gauss's law, $\nabla \cdot \mathbf{E}={\rho }_e/{ϵ}_0$, reproduces the continuity equation. The displacement current term makes these equations consistent for time-dependent charge distributions, such as a charging capacitor. It is not a stream of free charges across the insulating gap. In matter, $\nabla \cdot \mathbf{D}={\rho }_f$ and $\nabla \times \mathbf{H}={\mathbf{J}}_f+{\partial }_t\mathbf{D}$ give the analogous conservation law for free charge; total charge also includes bound charge.

An electrical transformer transfers alternating electrical power between windings through a shared changing magnetic flux. A core with large magnetic permeability confines most of the flux, so both windings link approximately the same flux $\Phi (t)$. Faraday's law gives induced electromotive forcesFor an ideal electrical transformer, negligible winding resistance and leakage flux imply the terminal-voltage magnitude ratioThe relative phase depends on the winding sense and terminal convention. At a loaded secondary, Lenz's law makes the secondary current oppose the flux change. The primary draws an additional current which approximately cancels the secondary magnetomotive force: $N_p{I}_p\simeq N_s{I}_s$ in magnitude when the magnetizing current is negligible. Consequentlyfor a resistive load, using root mean square values. More generally the ideal device conserves instantaneous power, with the appropriate current signs. A load impedance $Z_L$ appears at the primary as $Z_{\mathrm{in}}=(N_p/N_s{)}^2{Z}_L$, enabling impedance matching and electrical isolation.

For sinusoidal flux, $\Phi ={\Phi }_{\max }\sin \omega t$ gives $V_{\mathrm{rms}}=\omega N{\Phi }_{\max }/\sqrt{2}$. At a given supply voltage, reducing frequency increases the required peak flux and can drive the core into magnetic saturation. Real losses include winding Joule heating, magnetic hysteresis, eddy currents and leakage flux; a laminated core suppresses eddy-current loops. A steady direct current produces no continuing secondary electromotive force, while its small winding resistance can allow a damaging primary current after switching transients.

The absence of magnetic monopoles is expressed by $\nabla \cdot \mathbf{B}=0$. In a regular simply connected region, a magnetic vector potential may be introduced so thatIts units are $\mathrm{T}\mathrm{m}=\mathrm{Wb}{\mathrm{m}}^{-1}$. It is not unique: adding a gradient leaves the magnetic field unchanged because $\nabla \times \nabla \chi =0$. In time-dependent electromagnetism,is a gauge transformation preserving both physical fields. Stokes theorem gives ${\oint }_C\mathbf{A}\cdot d\mathbf{\ell }={\int }_S\mathbf{B}\cdot d\mathbf{S}={\Phi }_B$ for a contour bounding an appropriate surface.

For localized steady currents, choose the Coulomb gauge $\nabla \cdot \mathbf{A}=0$. Substitution into Ampère's law and the curl-of-curl identity givesBoundary conditions are needed in addition to the gauge choice. For a uniform magnetic field one convenient choice is $\mathbf{A}=\frac{1}{2}\mathbf{B}\times \mathbf{r}$. For a magnetic dipole, $\mathbf{A}={\mu }_0\mathbf{m}\times \mathbf{r}/(4\pi r^3)$ outside its source. The magnetic vector potential simplifies field calculations and appears directly in the Lagrangian of a charged particle, $L=\frac{1}{2}m{v}^2+q\mathbf{v}\cdot \mathbf{A}-q\varphi$. In multiply connected regions, a field-free region can retain nontrivial circulation of $\mathbf{A}$, relevant to the Aharonov-Bohm effect; a local gauge argument cannot remove every global circulation.