Write the instantaneous electrical conductance as . Here is the maximal electrical conductance of the recorded membrane, is the activation variable, is inside-minus-outside membrane potential, and is the potassium Nernst equilibrium potential. The factor is the electrochemical driving voltage; positive conventionally denotes outward positive charge. For an electric current density, must instead be an electrical conductance per area.
In the Hodgkin-Huxley model, four equivalent independent activation gates must all be permissive, each with probability , so their joint opening probability is . At fixed voltage each gate obeys
The model assumes approximately Ohmic open-channel conduction, a well-defined population-average electrical conductance, and an almost constant potassium reversal potential during a brief recording. Four phenomenological gates should not be mistaken for a proof of four physically independent molecular transitions. The simple delayed-rectifier description also omits ion-channel inactivation.
Reducing the available electrical conductance can weaken repolarization, broaden an action potential and alter repetitive firing. Depending on channel class and tissue, excess excitability or impaired recovery can follow; persistent depolarization can also reduce voltage-gated sodium channel availability. Cardiac potassium-current reductions can prolong the action potential and contribute to Long QT syndrome. These are conditional physiological consequences, not a claim that every potassium-current reduction has the same clinical effect.
The intracellular recording by Alan Hodgkin and Andrew Huxley shows the membrane voltage rising from a negative resting value to a positive overshoot, with the outside held at zero reference. The action potential therefore does more than transiently abolish a resting polarization: it reverses the sign across the membrane. A simple hypothesis that excitation only makes an otherwise potassium-dominated membrane equally leaky cannot explain that positive overshoot.
The result helped motivate a transient, selective change in membrane permeability, later resolved into rapid inward sodium current followed by outward potassium current. The positive sodium equilibrium potential calculated above makes the overshoot physically plausible, while potassium conductance favours a negative resting voltage and repolarization. The 1939 voltage trace itself did not identify individual channel proteins or establish the full later voltage-dependent gating mechanism; those conclusions required ionic substitution and voltage-clamp evidence.[ref]
Panel B steps the membrane from approximately to and holds it there. The sodium current becomes inward, peaks rapidly, and decays almost to zero despite maintained depolarization. At the sodium driving force is negative, consistent with the negative current convention. A conductance description is
where is channel number, single-channel conductance and the open probability. The trace requires rapid voltage-dependent activation followed by slower inactivation, rather than a passive pore whose only response is an instantaneous constant current. Recovery normally requires repolarization, helping produce a refractory period and directional propagation of excitation.
A typical eukaryotic voltage-gated sodium channel contains four homologous membrane-spanning domains in one large pore-forming protein. Charged S4 helices sense voltage; pore-associated regions form a selective pathway and activation gate. Fast inactivation involves intracellular machinery coupled to the pore, classically the interdomain III–IV region, and should not be identified automatically with the tethered potassium-channel blocker. The pore permits rapid downhill electrochemical transport while maintaining selectivity against other ions.
Evidence separates these properties: clamp-step experiments distinguish voltage dependence and activation from decay at a fixed voltage; changing extracellular sodium shifts reversal potential; selective blockers isolate sodium current; patch-clamp records resolve stochastic single-channel openings; and mutations of sensors, filter residues or the fast-inactivation machinery alter the corresponding function. A single macroscopic trace alone cannot uniquely determine all microscopic rate constants.
Add an unavailable nonconducting inactivated state to the two-state gating scheme, for example
The probabilities obey
Depolarization increases activation, initially raising ; subsequent transfer to reduces current while voltage is held constant. Slow recovery at the depolarized voltage permits most channels to become unavailable. Repolarization promotes recovery and deactivation. More closed states and closed-state inactivation may be needed for quantitative data, but this minimal extension already explains the rise followed by decay that fixed-rate gating cannot produce from a closed population.
The original Panel A is readable: the baseline is roughly and the peak about , giving a voltage excursion near . Using the specific membrane capacitance and surface area,
A coarser spike estimate gives ions, illustrating the precision appropriate to the graph. These are the net monovalent charges needed to charge the capacitor if sodium supplies the inward charge; simultaneous opposing currents can make the actual sodium influx larger.
The cell contains intracellular sodium ions. The capacitive estimate adds only about , or . Thus a spike does not equilibrate bulk concentrations. The sodium-potassium ATPase maintains the gradients over many spikes, exporting three sodium ions per two potassium ions imported per ATP; the estimated sodium load alone corresponds to at least about pump cycles. Rapid repolarization itself comes mainly from changing channel conductances, while sustained fast firing requires adequate energy supply and gradient restoration. The small stated volume and large area are used as supplied, without assuming a particular cell geometry.
At the initial negative membrane potential, most voltage-gated potassium channels have a closed activation gate. Depolarization moves charged residues in each voltage-sensing domain, particularly the S4 helices, through the electric field. Coupling between the voltage-sensing domains and the pore opens the intracellular gate. A classical voltage-gated potassium channel has four subunits, each with six transmembrane helices; S5, the pore loop and S6 contribute to the central pathway and selectivity filter. The rising open probability produces increasing outward potassium electric current, since the imposed positive membrane potential is above the potassium Nernst equilibrium potential. Here outward electric current is positive: , where is channel number and is single-channel electrical conductance.
The electric current subsequently falls because the rapidly inactivating Shaker form exhibits ball-and-chain inactivation. An intracellular N-terminal domain, tethered to the channel, blocks the open pore. The ion channel can therefore stop conducting while the membrane potential remains depolarized and the activation machinery remains activated. This is ion-channel inactivation, rather than reversal of the voltage step, loss of the ionic driving force, or ordinary gate closure. Repolarization favors removal of the block and recovery of channel availability. Slower C-type inactivation involving the outer pore can coexist, but is not the principal explanation of the rapid decay described here.
Several independent observations connect this functional explanation to structure. Small transient gating electric currents report movement of sensor electric charge before ionic conduction; charge-neutralization studies of S4/S2 change the measured gating charge and activation. Structural studies resolve separate sensor and pore regions.[ref][ref] Historical N-terminal removal abolished rapid ion-channel inactivation while preserving activation, and the corresponding free peptide restored block from the cytoplasmic side. These results separate the activation gate from the tethered blocker and identify which side of the cell membrane contains the blocking domain.[ref][ref]
Source-gap TODO: the supplied PDF's figure invokes an undefined image object, so its actual pulse duration, pulse sequence, current scale, peak amplitude, decay time and any tail-current waveform cannot be read. The account above uses only the stated change from to and the stated rise and rapid decay; no numerical kinetic fit or reconstruction of the missing trace is claimed.
Add a nonconducting inactivated state to the continuous-time Markov chain:
For example, and . Depolarization first increases , then transfers population into by ball-and-chain inactivation. A small recovery rate during the pulse permits a sustained decline of . Repolarization favors recovery, eventually restoring the closed but available population. Several sequential closed states can represent the cooperative movements of four voltage-sensing domains; three states are the minimal explanation of rise followed by decay, rather than a quantitative fit to the missing trace.
Loss of outward potassium electric current weakens repolarization and can broaden an action potential. Reduced residual potassium electrical conductance can reduce the subsequent hyperpolarization and permit faster repeated firing. Conversely, prolonged depolarization can maintain sodium ion-channel inactivation, delay recovery and lower the maximum firing frequency or cause depolarization block. The sign of the frequency change depends on the other ion channels and recovery kinetics; rapid potassium ion-channel inactivation alone does not fix it.
In a classical action potential, delayed activation of voltage-gated potassium channels supplies outward electric current that drives repolarization. In the Hodgkin-Huxley model, for example, and . Increasing the opening rate at depolarized membrane potential, other properties fixed, recruits outward electric current earlier: the action potential generally becomes narrower and may have a smaller peak. Slower opening delays repolarization and broadens the action potential.
Slower closing after repolarization retains excess potassium electrical conductance, lengthening the after-hyperpolarization and often the interval of reduced excitability. Faster closing shortens this tail and permits earlier recovery. If activation or the available electrical conductance is insufficient, normal repolarization may fail; changing rates can also change the steady open fraction. Duration is therefore determined by the whole balance of inward and outward electric currents, not by a closing rate in isolation.
An ion channel can disturb cellular electrical activity by changing unitary electrical conductance, open probability, gating kinetics or the number delivered to the cell membrane. A useful organizing relation is
Here outward electric current is positive. Altering one channel's biophysical behavior changes the balance governing membrane potential and hence the timing or recurrence of action potentials.
Long QT syndrome, type 3. Certain disease-associated SCN5A variants impair fast ion-channel inactivation of the cardiac voltage-gated sodium channel NaV1.5. Instead of vanishing promptly after the upstroke, a small persistent inward sodium electric current remains during the plateau and repolarization. Because in this phase, the residual electric current is inward and opposes the outward electric currents that would terminate the cardiac action potential. The ventricular action potential lasts longer, extending the QT interval on the electrocardiogram. Excessively prolonged or uneven repolarization permits early afterdepolarizations and dangerous ventricular rhythm disturbances.
Genetic association identifies the channel, while voltage clamp distinguishes defective ion-channel inactivation from a mere increase in channel abundance. Recordings of disease-associated channels show persistent or bursting openings; coupling measured mutant sodium electric current into an otherwise modeled cardiac membrane through dynamic clamp tests whether that kinetic defect prolongs the action potential. The phenotype is variant-specific: not every SCN5A variant increases late electric current or causes long QT syndrome.[ref][ref]
Myotonia congenita. CLCN1 encodes the skeletal-muscle ClC-1 chloride channel, which normally supplies a large resting stabilizing electrical conductance. Because the chloride reversal potential is near the resting membrane potential, that pathway resists small depolarizing disturbances. Loss of functional channels, reduced electrical conductance, or a shift in opening toward more positive membrane potential reduces the resting electrical shunt. Potassium accumulation in the transverse-tubule space during activity can then produce larger depolarizing afterpotentials and trigger further muscle action potentials after the intended stimulus has ceased. Continued electrical firing sustains contraction and delays relaxation: this is myotonia, rather than a primary inability of the contractile apparatus to relax.
Patient-family linkage and variant analysis connect the disease to ClC-1. Functional recordings of disease-associated channels demonstrate shifted voltage dependence and reduced availability near resting membrane potential; single-channel and noise measurements also resolve two conductive protopores and their gating behavior. Different variants can act through different mechanisms, so a gating shift is an example rather than an explanation of every case.[ref][ref][ref]
These examples connect contrasting current defects to their consequences: persistent inward sodium electric current prolongs cardiac action potentials, whereas loss of stabilizing resting chloride electrical conductance permits repetitive skeletal-muscle action potentials. Both causal chains require functional channel measurements in addition to a disease-associated sequence change.