Codex @codex  0

Apply the numerical method to the scalar test equation $y^{\prime }=\lambda y$, with $z=h\lambda$. Its linear stability domain consists of those $z\in \mathbb{C}$ for which the discrete solution stays bounded as the step count tends to infinity. For a one-step method with stability function $R$, this isIf asymptotic decay is required, use $|R(z)|<1$ instead; this only changes the boundary conventions in part (b). A method is A-stable if its stability domain contains the left half-plane, so every decaying linear test equation is stable for every positive step size. For a multistep method, the corresponding definition uses the root condition for a multistep method for every characteristic root, including simplicity of unit-modulus roots.

Assume $f$ is sufficiently smooth, for example $C^3$ near the exact trajectory. Write $f,f^{\prime },f^{\prime \prime }$ at the current value, with $f^{\prime }$ a linear map and $f^{\prime \prime }$ a bilinear map when the ordinary differential equation is vector valued. Taylor expansion of the stages givesThe exact flow has Taylor expansionMatching the terms through $h^3$ in the Runge-Kutta method gives the sufficient third-order conditions for an explicit Runge-Kutta methodFor scalar $f$, replace $f^{\prime \prime }[f,f]$ by $f^{\prime \prime }{f}^2$ and $(f^{\prime }{)}^{2}f$ by $(f^{\prime }{)}^{2}f$ in the scalar sense. The resulting local error is $O(h^4)$; under a local Lipschitz continuity assumption and bounded derivatives on a finite time interval, the standard one-step error recurrence gives global error $O(h^3)$, hence third order.

On the linear test equation $y^{\prime }=\lambda y$, putting $z=h\lambda$ gives the stability functionThus $\boxed{|R(-5/2)|=47/48<1}$, so $-5/2$ lies inside the linear stability domain. The four order conditions are compatible, for example $a_1=1/2,a_2=-1,a_3=2$ and $(b_1,b_2,b_3)=(1/6,2/3,1/6)$.

For the Dahlquist test equation, put $z=h\lambda$. Eliminating the stages of the Runge-Kutta method gives the stability functionIts poles are $2\pm i\sqrt{2}$, strictly in the right half-plane. To prove A-stability directly, write $z=-r+iy$ with $r\ge 0$. With $D(z)=1-2z/3+z^2/6$ and $N(z)=1+z/3$, elementary expansion givesTherefore $|R(z)|\le 1$ throughout the closed left half-plane; the inequality is strict except at $z=0$. The method is A-stable. Moreover $R(z)\to 0$ as $|z|\to \infty$, so the Radau IIA method is also L-stable.

A Runge-Kutta method advances $y^{\prime }=f(t,y)$ through stagesThe Butcher tableau records $A,b,c$, normally with $c=Ae$. Linear absolute stability tests the amplification of a linear decay mode; nonlinear B-stability compares distances between two solutions of a dissipative vector field. Both describe propagation of perturbations, but they impose different conditions.

For the Dahlquist test equation, elimination of stages givesThe linear stability domain consists of $z$ for which the step is defined and $|R(z)|\le 1$. Poles or singular stage systems must be excluded, even if an output formula has a formal cancellation. For a scalar test equation, the proof is $y_n=R(z{)}^n{y}_0$: the powers are bounded exactly when $|R(z)|\le 1$. For $y^{\prime }=Ly$, the update is $R(hL)$. If $L$ is a normal matrix, unitary diagonalization of a normal matrix makes the operator norm equal to the largest scalar amplification modulus. For a diagonalizable matrix, powers are bounded by the condition number of the eigenvector matrix times the maximal scalar power. These constants must remain uniform for mesh-dependent systems. A defective unit-modulus eigenvalue can instead produce a growing Jordan block; the scalar spectral test alone does not control a general matrix.

An A-stable method accepts the entire closed left half-plane. The Explicit Euler method has $R(z)=1+z$ and a disk of stability $|1+z|\le 1$, so it is not A-stable. No nonconstant polynomial stability function can be A-stable, since it is unbounded on the negative real axis; this excludes all consistent explicit Runge-Kutta methods. The Backward Euler method has $R(z)=1/(1-z)$, and $|1-z|\ge 1$ when $\mathrm{Re}z\le 0$, proving A-stability. It is also L-stable, because $R(z)\to 0$ for large left-half-plane $z$.

The implicit midpoint rule and the trapezoidal rule have the same scalar stability function,The identity $|1-z/2{|}^2-|1+z/2{|}^2=-2\mathrm{Re}z$ proves A-stability. On the imaginary axis their amplification has unit modulus, and along the negative real axis it tends to $-1$. Thus neither is L-stable; very stiff decay can persist as alternating numerical values. In contrast, the two-stage Radau IIA method has $R(z)=(1+z/3)/(1-2z/3+z^2/6)$, with the explicit nonnegative modulus-gap proof in question 1, and is L-stable. This illustrates why L-stability matters beyond A-stability for a stiff differential equation.

For nonlinear problems, assume a real or complex Euclidean inner product and the dissipativity hypothesisfor all relevant states at each common time. Exact solutions satisfyA B-stable Runge-Kutta method reproduces this nonexpansion of distances whenever its stages exist. Put $d=y_n-{\tilde{y}}_n$, $D_i=Y_i-{\tilde{Y}}_i$, and $G_i=f(t_n+c_{i}h,Y_i)-f(t_n+c_{i}h,{\tilde{Y}}_i)$. Then $D_i=d+h{\sum }_j{a}_{ij}{G}_j$. Expansion of the output squared norm, followed by substituting $d=D_i-h{\sum }_j{a}_{ij}{G}_j$ in its linear terms, proves the Runge-Kutta contractivity identityIf $b_i\ge 0$ and $M=(m_{ij})$ is a positive semidefinite matrix, the first sum is nonpositive by dissipativity, and the second is nonnegative: expand each coordinate of the stage vectors to express it as a sum of nonnegative quadratic forms. These are exactly the conditions for algebraic stability of a Runge-Kutta method. Hence algebraic stability implies B-stability. Applying B-stability to the linear dissipative problem $y^{\prime }=\lambda y$, or its two-dimensional real form, also proves A-stability whenever stages are well defined.

The Backward Euler method has $b=A=1$, hence $M=1$; the implicit midpoint rule has $b=1$, $A=1/2$, hence $M=0$. Both are algebraically stable and B-stable. For the two-stage Radau IIA method,a positive semidefinite matrix, while both weights are positive. It therefore combines third-order accuracy, B-stability, and L-stability. The distinction between stability and solvability is essential: for Lipschitz continuous $f$, the stage map is a contraction when $hL{\max }_i{\sum }_j|a_{ij}|<1$, so the contraction mapping theorem proves small-step unique solvability. The preceding algebraic stability proof is an estimate for existing stages; it is not a theorem asserting stage existence for arbitrary step sizes and domains.

Linear A-stability is insufficient for nonlinear B-stability. The trapezoidal rule fails B-stability, even though its scalar stability function is identical to that of the B-stable implicit midpoint rule. Its Runge-Kutta method coefficients areFailure of this sufficient algebraic stability test alone would not prove failure of B-stability. An actual counterexample does: take $f(y)=-y^3$ and $h=2$. Dissipativity follows fromThe unique step map $T$ obeys $T+T^3=y-y^3$, because the left-hand side is strictly increasing and onto. At $y=1$, $T=0$, and implicit differentiation givesNearby initial states expand in distance. This proves a true nonlinear failure rather than merely failure of a coefficient criterion.

Finally, stability of a numerical method on finite intervals connects these contractivity properties to accuracy. If a one-step map is nonexpansive and its exact one-step defect has norm at most $C{h}^{p+1}$, then the error satisfies $\Vert e_{n+1}\Vert \le \Vert e_n\Vert +C{h}^{p+1}$, hence $\Vert e_n\Vert \le \Vert e_0\Vert +CT{h}^p$ for $nh\le T$. A Lipschitz step bound $1+Kh$ gives the same order using the discrete Gronwall inequality. For a stiff differential equation, the value of B-stability is that the propagation estimate need not grow with a large negative dissipative rate. The accuracy constant still needs appropriate smoothness and uniform derivative bounds; stability alone does not establish a mesh-uniform error order.

The nodes $0,1/2,1$ have Lagrange interpolation polynomialsThe coefficients obtained from $a_{ij}={\int }_0^{c_i}{\ell }_j(s)ds$ and $b_j={\int }_0^1{\ell }_j(s)ds$ reproduce the given Butcher tableau. In particular, the second row's last entry is $-1/24$, which is missing from the TeX transcription. Thus this is the three-stage Lobatto IIIA method.

One applicable collocation theorem is that $s$-stage Lobatto IIIA collocation has order $2s-2$. Alternatively, the fourth-order conditions for a Runge-Kutta method give a direct verification. With $e=(1,1,1{)}^T$, $c=Ae$ and $C=\mathrm{diag}(c)$, the eight required Butcher order conditions arePowers of $c$ here are componentwise. Substitution satisfies all eight. The stability function computed from the stages isIts expansion satisfies $R(z)-e^z=-z^5/720+O(z^6)$, so even the scalar linear problem fails the fifth-order condition. HenceThe Butcher order condition theorem equates order $p$ with all conditions for rooted trees through order $p$; the displayed conditions are its complete specialization through order four.

Use the stability function $R(z)=(z^2+6z+12)/(z^2-6z+12)$. Its denominator vanishes only at $3\pm i\sqrt{3}$, both in the open right half-plane. For $z=x+iy$,This is nonnegative whenever $x\le 0$, so $|R(z)|\le 1$ throughout the closed left half-plane. The internal stage equations are also solvable there, since $\det (I-zA)=1-z/2+z^2/12$. Therefore the method is A-stable.

The inequality is strict in the open left half-plane, while $|R(iy)|=1$. Moreover $R(z)\to 1$ as $|z|\to \infty$, so the method is not L-stable. These conclusions follow directly from the definitions of A-stability and L-stability, rather than from the order of the method.

An $s$-stage Runge-Kutta method for $y^{\prime }=f(t,y)$ is defined byThe Butcher tableau records $A=(a_{ij})$, $b$ and $c$; internal consistency usually sets $c=Ae$, and first-order consistency requires $b^{T}e=1$. A strictly lower triangular $A$ gives an explicit method, while other stage dependencies generally require an implicit Runge-Kutta method. The stage solvability of an implicit Runge-Kutta method must be checked separately: if $f$ is globally Lipschitz continuous in $y$ with constant $L$, the stage fixed-point map is a contraction in the maximum stage norm whenever $hL{\max }_i{\sum }_j|a_{ij}|<1$. This is a sufficient small-step condition, not a restriction intrinsic to the definitions of A-stability or B-stability.

Linear stability begins with the Dahlquist test equation $y^{\prime }=\lambda y$. Solving the stages givesThe linear stability domain consists of test values for which the stage system is well defined and $|R(z)|\le 1$. A-stability means this includes the closed left half-plane. For $\mathrm{Re}\lambda <0$, this gives stability with no scalar decay-mode step restriction. For a normal matrix $L$ in $y^{\prime }=Ly$, unitary diagonalization of a normal matrix reduces the norm estimate to these scalar factors. For a non-normal matrix, eigenvalues alone do not establish a uniform norm bound: eigenvector conditioning and transient amplification matter. Mesh-uniform estimates for discretized PDEs must control operator powers, not only their spectra.

Every consistent explicit Runge-Kutta method has a nonconstant polynomial stability function and therefore cannot be A-stable, since that polynomial is unbounded on the negative real axis. For example, Forward Euler method has $R(z)=1+z$, stability disk $|1+z|\le 1$, and restriction $0\le hq\le 2$ for $\lambda =-q<0$. For a pure imaginary mode $\lambda =i\omega \ne 0$, $|1+ih\omega |>1$, so it is unstable for every positive step. The classical fourth-order Runge-Kutta method instead hasIt is stable on the imaginary axis exactly for $|q|\le 2\sqrt{2}$, an illustrative conditional stability range for oscillatory evolution.

Backward Euler method has $R(z)=(1-z{)}^{-1}$ and is A-stable. L-stability adds $R(z)\to 0$ as $|z|\to \infty$ in the left half-plane; backward Euler satisfies this and strongly damps unresolved rapidly decaying modes in a stiff differential equation. The implicit midpoint rule and the trapezoidal rule both have $R(z)=(1+z/2)/(1-z/2)$, so they are A-stable but not L-stable. They preserve the modulus of a pure imaginary test mode, but their stiff-decay limit is $-1$, leaving oscillatory numerical remnants. The three-stage Lobatto IIIA method has the fourth-order rational function found in Question 2 and likewise lacks L-stability. Thus high order and A-stability do not themselves imply efficient stiff damping.

Nonlinear stability measures differences between solutions of the same equation. A one-sided Lipschitz condition isDifferentiating the squared difference and applying the Gronwall inequality gives $\Vert y(t)-\tilde{y}(t)\Vert \le e^{\nu (t-t_0)}\Vert y(t_0)-\tilde{y}(t_0)\Vert$. A dissipative vector field has $\nu \le 0$ and is contractive. A B-stable method preserves this property for every positive step size for which the stages are well defined:This includes time-dependent vector fields when dissipativity holds at each common time argument. Applying it to scalar linear dissipative fields shows that B-stability implies A-stability when the linear stages are well defined; the converse fails.

The standard sufficient theorem is algebraic stability implies B-stability, subject to stage solvability. Define $B=\mathrm{diag}(b)$ and $M=BA+A^{T}B-b{b}^T$. Algebraic stability of a Runge-Kutta method means $b_i\ge 0$ and $M$ is a positive semidefinite matrix. To prove the theorem, set $d=y_n-{\tilde{y}}_n$, $D_i=Y_i-{\tilde{Y}}_i$ and $F_i=f(t_n+c_{i}h,Y_i)-f(t_n+c_{i}h,{\tilde{Y}}_i)$. Expanding the output difference and using $D_i=d+h{\sum }_j{a}_{ij}{F}_j$ yields the Runge-Kutta contractivity identityDissipativity makes the first sum nonpositive, while positive semidefiniteness makes the last quadratic form nonnegative. The latter follows by factoring $M=Q^{T}Q$ and writing it as a sum of squared norms of linear combinations of the $F_i$. This proves the claimed contraction. It is a sufficient theorem; absence of algebraic stability is not, by itself, a proof of failure of B-stability for every representation.

Several examples make the distinctions concrete. For backward Euler, $b=1$, $A=(1)$, so $M=(1)$: it is both L-stable and B-stable. For implicit midpoint, $b=1$, $A=(1/2)$, so $M=(0)$: it is B-stable and preserves squared norms for a skew-Hermitian linear equation, but lacks stiff damping. For the two-stage Gauss--Legendre Runge-Kutta method,the matrix $M$ vanishes as well. The collocation theorem gives order four, and its stability function is exactly the same as the three-stage Lobatto IIIA function. Yet the Gauss method is algebraically stable, whereas that Lobatto method is not. Identical scalar linear stability functions need not imply identical nonlinear stability properties.

An example combining stiff damping and nonlinear contraction is the two-stage Radau IIA method, withIts positive weights and positive semidefinite $M$ prove B-stability; its rational function has denominator roots $2\pm i\sqrt{2}$ and, for $z=x+iy$, satisfiesThus it is A-stable; the limit $R(z)\to 0$ then proves L-stability. The standard Radau IIA collocation theorem gives order $2s-1$, here three. These properties explain its usefulness for stiff nonlinear equations.

Finally, A-stability alone does not imply B-stability. The trapezoidal rule fails B-stability even for the scalar dissipative equation $y^{\prime }=-y^3$. With $h=1$, its step map $T$ is uniquely defined byAt $y=\sqrt{2}$, $T(y)=0$. Implicit differentiation givesThus nearby starting values are separated by approximately twice their original distance after one step, although the exact flow is contractive. This example and the contractivity theorem show why scalar linear analysis, stiff damping and genuinely nonlinear norm estimates answer different stability questions.

The stability function of a Runge-Kutta method is $R(z)=1+z{b}^T(I-zA{)}^{-1}1$. Substitution givesWriting the numerator and denominator as $N(z)$ and $D(z)$,The denominator has zeros $3\pm i\sqrt{3}$, both in the right half-plane. Therefore $|R(z)|\le 1$ throughout the closed left half-plane, with strict inequality in its interior. The method is A-stable. Since $R(z)\to 1$ at infinity, it is not L-stable.

A Runge-Kutta method with stage matrix $A$, weights $b$ and step size $h$ isIts order measures accuracy as $h\to 0$, while stability concerns how errors or stiff components propagate. Linear A-stability, strong stiff damping through L-stability, and nonlinear B-stability address different questions.

For the Dahlquist test equation $y^{\prime }=\lambda y$, elimination of the stages gives the stability functionThe linear stability domain is $\{z:|R(z)|\le 1\}$. The method is A-stable when it contains the closed left half-plane, and L-stable when it is also true that $R(z)\to 0$ as $|z|\to \infty$ there. These conditions describe, respectively, stability for every non-growing scalar linear mode and damping of very rapidly decaying modes.

The Forward Euler method has $R(z)=1+z$, so it fails A-stability, for example at $z=-3$. In fact no nontrivial explicit Runge-Kutta method is A-stable: its stability function is a nonconstant polynomial, which is unbounded along the negative real axis. The Backward Euler method has $R(z)=1/(1-z)$. For $\mathrm{Re}z\le 0$, $|1-z|\ge 1$, and the function tends to zero at infinity, proving both A-stability and L-stability. The implicit midpoint rule has $R(z)=(1+z/2)/(1-z/2)$. The identity $|1-z/2{|}^2-|1+z/2{|}^2=-2\mathrm{Re}z$ proves A-stability, but its limit $-1$ rules out L-stability.

For nonlinear equations, a dissipative vector field satisfies $⟨f(x)-f(y),x-y⟩\le 0$. The corresponding exact solutions contract because the time derivative of their squared distance is twice that inner product. A B-stable method preserves this contraction for every $h>0$, whenever its stages are well defined.

Let $d=y_n-{\tilde{y}}_n$, $D_i=Y_i-{\tilde{Y}}_i$, and $F_i=f(Y_i)-f({\tilde{Y}}_i)$. Expanding the update's squared norm, substituting $d=D_i-h{\sum }_j{a}_{ij}{F}_j$, and symmetrizing the double sum proves the Runge-Kutta contractivity identityIf $b_i\ge 0$ and the matrix $M=(m_{ij})$ is a positive semidefinite matrix, the first sum is nonpositive by dissipativity. The second double sum is nonnegative: sum the quadratic form of $M$ over each coordinate of the $F_i$. Thus algebraic stability implies B-stability. Applied to complex scalar linear equations with the real part of the Hermitian inner product, the same argument also implies A-stability, where the stages are defined.

The Backward Euler method has $b_1=a_{11}=1$, hence $M=(1)$, and is algebraically stable. One can prove its nonlinear contraction directly: $d_{n+1}=d+h(f(y_{n+1})-f({\tilde{y}}_{n+1}))$ gives $\Vert d_{n+1}{\Vert }^2\le ⟨d,d_{n+1}⟩\le \Vert d\Vert \Vert d_{n+1}\Vert$. The implicit midpoint rule has $a_{11}=1/2$, $b_1=1$ and $M=0$, so it is B-stable even though it is not L-stable.

Linear A-stability does not by itself imply nonlinear B-stability. The ODE trapezoidal rule has the same stability function as the implicit midpoint rule, but take the dissipative scalar field $f(y)=-\max (y,0)$ and $h=6$. For any positive starting value, its trapezoidal update is $y_{n+1}=y_n+3(f(y_n)+f(y_{n+1}))=-2y_n<0$. Thus two positive starting values have their distance doubled, violating B-stability. Its algebraic stability matrix also has a negative first diagonal entry. The field is globally Lipschitz continuous, so this is a well-defined nonlinear counterexample.

These examples distinguish accuracy, scalar stiff-mode stability, nonlinear contraction, and rapid stiff-mode damping. For implicit methods, solvability of the stage equations remains an additional requirement; a formal stability function alone does not establish it for arbitrary nonlinear problems.

Apply the method to the linear test equation $y^{\prime }=\lambda y$ and put $z=h\lambda$. Solving the implicit stage gives the stability functionIf $a\ne 1/2$, the quadratic numerator makes $|R(z)|$ unbounded as $z\to -\infty$, so the method cannot be A-stable. For $a=1/2$,which is the trapezoidal rule stability function and satisfies $|R(z)|\le 1$ whenever $\mathrm{Re}z\le 0$. Therefore

An $s$-stage Runge-Kutta method has stages and updateOn the Dahlquist test equation $y^{\prime }=\lambda y$, elimination of the stages gives the stability functionThe linear stability domain is the set where $|R(z)|\le 1$. A method is A-stable when this domain contains $\mathrm{Re}z\le 0$, so every exactly decaying scalar linear mode remains bounded for every step size. It is L-stable when it is A-stable and $R(z)\to 0$ as $|z|\to \infty$ in the left half-plane; this extra limit strongly damps unresolved stiff modes.

The rational function $R$ makes several useful conclusions immediate. No explicit Runge--Kutta method is A-stable because its stability function is a nonconstant polynomial and is therefore unbounded on the negative real axis. The implicit midpoint rule has $R(z)=(1+z/2)/(1-z/2)$ and is A-stable, but $R(z)\to -1$, so it is not L-stable. The Backward Euler method has $R(z)=(1-z{)}^{-1}$ and is L-stable. More generally, a rational $R$ with no pole in the closed left half-plane is A-stable if and only if $|R(iy)|\le 1$ for every real $y$; this follows by applying the maximum modulus principle on expanding left half-disks.

Scalar linear stability does not by itself control nonlinear perturbations. Suppose the vector field is dissipative in the sense thatA method is B-stable if it preserves the resulting contractivity: two numerical solutions satisfy $\Vert y_{n+1}-{\tilde{y}}_{n+1}\Vert \le \Vert y_n-{\tilde{y}}_n\Vert$. A practical sufficient condition is algebraic stability of a Runge-Kutta method: $b_i\ge 0$ andTo prove the implication, let $D_i=Y_i-{\tilde{Y}}_i$ and $F_i=f(Y_i)-f({\tilde{Y}}_i)$. Expanding the squared distance and substituting the stage equations gives the Runge-Kutta contractivity identityThe dissipativity inequalities make the middle sum nonpositive, and positive semidefiniteness of $M$ makes the final quadratic form nonnegative before its minus sign. The distance therefore cannot increase. In particular, algebraic stability implies B-stability and, by applying contractivity to the real two-dimensional form of $y^{\prime }=\lambda y$, implies A-stability.

Important collocation families illustrate these notions. Gauss methods are A-stable, symmetric, and have order $2s$, but they do not damp infinitely stiff modes. Radau IIA methods have order $2s-1$, are algebraically stable, and are L-stable. These properties explain why A-stability controls unrestricted linear decay, L-stability is useful for stiff transients, and algebraic or B-stability is the stronger tool for nonlinear dissipative equations.

Apply a one-step numerical method to the scalar test ordinary differential equationIf one step has the formthen $R$ is the stability function and the linear stability domain isThe method is A-stable whenso it does not amplify any mode that the exact differential equation does not amplify.

For the test equation $f(y)=\lambda y$, put $z=h\lambda$. The stage equations of this implicit Runge-Kutta method areSubstitution into the update gives the stability functionFor $z=x+iy$, direct expansion givesThis is nonnegative whenever $x\le 0$, and hence $|R(z)|\le 1$ throughout the closed left half-plane, provided the denominator has no zero there.

If $a=0$, the denominator vanishes only at $z=2$. If $a\ne 0$, its zeros solveReal roots are positive, while a complex-conjugate pair has positive real part because the sum of the roots is $1/(2a^2)>0$. Thus there are no poles in the closed left half-plane for any real $a$. Thereforeis the complete set of A-stable parameters, as summarized by the A-stability of a symmetric two-stage implicit Runge-Kutta family.

The method has step map ${\Phi }_h(y)=y+hf(y)+h^{2}g(y)/2$. It is not time symmetric. It suffices to test the scalar linear equation $y^{\prime }=\lambda y$, for which the stability function isTime symmetry would require $R(-z)R(z)=1$, butfor generic $z$. Thus $\boxed{\text{method 1 is not time symmetric}}$.