Express the position vector in the suggested orthonormal basis as . Then
This orthogonal transformation preserves and has Jacobian determinant of absolute value one, so . The basis actually reverses orientation; the absolute value of the Jacobian determinant is why no minus sign enters the volume integral. Also , so the half-space becomes .
At each fixed , the section is the disk , of area . Its reflection symmetry in makes the integral of vanish. Hence the required triple integral is
The negative sign is also consistent with the cap lying in the direction , where its average coordinate is negative.
For multivariable Newton iteration, use the Jacobian matrix
At , direct evaluation gives
With , the required linear system is therefore
After solving this linear system, form . To get the second iterate, evaluate both the Jacobian matrix and the residual anew at , solve
and set . Reusing the initial Jacobian matrix would define a different iteration. The requested linear system has deliberately been left unsolved.
To find a critical point, apply multivariable Newton iteration to the gradient, rather than to the scalar value . The gradient and Hessian matrix are
Write the correction as . At , Newton's method in optimization requires
Subtracting the second equation from the first gives , so and . Hence
The gradient there is
A critical point has not been found after one iteration.
At the alternative starting point , the Hessian matrix and gradient are
The correction would need to satisfy and simultaneously. This linear system is inconsistent. The standard iteration cannot take even its first step: the Hessian matrix is a singular matrix, and the required correction does not exist. This is a Newton correction compatibility condition failure, not merely an ambiguity between several corrections.
The greatest common divisor of and is , which divides . Divide the linear Diophantine equation by to obtain
Reducing modulo gives , so . Substitution gives the complete family of integer solutions
Every such pair satisfies the equation, and every solution must have this residue for , so none are omitted. Positivity requires and . For integer these are exactly . Thus the pairs with both entries positive are
An equilibrium point has and . Since , the linearized displacement satisfies
Thus gives a stable equilibrium, while gives an unstable equilibrium point. More generally, a strict local minimum of is sufficient for stability by the conserved first integral in b. When , the second-derivative test alone is inconclusive, and the local shape of must be examined.
For the specified ellipse, put . Direct differentiation gives
Consequently, with and ,
Two equilibria always occur at . Any further equilibria must satisfy
To decide exactly when this is possible, view the equation as with . Its derivative is positive on , and it takes endpoint values and . Since implies , the complete list is:
  • If , there are four distinct equilibria modulo : , , and . For the additional positive angle lies in ; at the additional pair is ; for it lies in .
  • If , the additional pair merges with , leaving two distinct equilibria, and .
  • If , there are only the two equilibria and . In particular, does not introduce a missing case: the undivided bracket is then the positive constant , so there is no extra root.
These are positions of the bead at rest relative to the rotating hoop. No stability classification of the particular ellipse is needed.
Continue with and . The tangent vector to the hoop is . Smooth contact means that the hoop's normal force has zero dot product with this tangent vector. The remaining applied force is , whose dot product with is .
Since , the Coriolis force is perpendicular to the hoop's plane and hence to . Also
Take the dot product of the rotating-frame Newton's second law with , substitute a, and divide by :
Define
Then and , so
Expanding the squares makes the cancellation of the mixed terms explicit:
The strict inequality follows from . Here is the rotating-frame effective potential per unit mass. Multiplication of the equation by gives the useful first integral .
All time derivatives in this part are taken relative to the rotating reference frame, so its basis is held fixed during differentiation. Put and . The chain rule and product rule give
Explicitly,
The separate Coriolis force and centrifugal force terms in the stated equation account for the motion of the basis relative to an inertial observer.
Initially also gives . Thus the initial velocity is azimuthal, with . By conservation of energy, the supplied mechanical energy divided by gives
The first term is nonnegative. Consequently
For a positive launch speed , introduce twice the radial effective potential on a surface of revolution per unit mass,
It satisfies
so it is a strictly convex function. Also as . To justify the other endpoint carefully, convexity gives for . This supplies a finite lower bound near , and the positive term consequently forces there.
Thus has a unique minimum at some . Its derivative is strictly increasing and zero there, so decreases to and increases afterwards. Its sublevel set is a single interval , with . If , the two boundary equations have distinct solutions; if , both boundaries are . The conservation of energy identity therefore proves
The two radii coincide exactly when , equivalently . This gives
The equation in b then has the constant solution , with : this is a circular orbit.
A positive inner bound requires . If zero launch speed is allowed, and the displayed inequality only gives because is strictly increasing; one may take the limiting inner bound . For example, satisfies all the stated hypotheses but permits inward motion from rest all the way towards the excluded axis. The two-positive-turning-radii argument therefore uses the natural interpretation of “launched with speed ” as .
For a smooth surface the friction force vanishes. The component of Newton's second law then gives , constant. Along the constraint , the chain rule gives
The acceleration in cylindrical coordinates is
Take the dot product of Newton's second law with the tangent vector . The normal force disappears, while the gravity term is . Dividing by gives
Using yields
On the surface of revolution, a normal vector is proportional to . Thus the normal force and gravity have no component. The component of Newton's second law, using the given linear drag force, is
Multiplication by therefore gives
The printed target equation omits the factor . The matching original PDF, page 5, gives both and , so this is a source inconsistency. If its in the target equation is intended to mean the drag coefficient per unit mass, put and write . Equivalently, if the intended force was , the requested convention gives
These formulas determine once is known; they do not assume a constant radius.
Write . Differentiating the angular momentum and applying Newton's second law gives
The central force contributes no torque, because it is parallel to . The angular momentum direction is fixed whenever it is nonzero; the motion is consequently planar. In the plane's polar coordinates, , so
For the mechanical energy, use the chain rule, Newton's second law, and :
Thus
For a trajectory on a time interval, both and are each a constant of motion precisely when or the velocity vanishes throughout that interval. Under the stated strictly attractive central force at a regular point , a permanently stationary trajectory is impossible by Newton's second law. For the stated attractive motion, both are conserved if and only if . An isolated instant of zero speed only makes the derivatives vanish at that instant. A radial trajectory has even with quadratic drag, but its mechanical energy still decreases whenever it moves.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact