Independence of the segment vectors makes the end-to-end distribution an -fold convolution. Use the characteristic function convention . For a three-dimensional isotropic freely jointed chain, the radial delta function fixes , and angular integration gives
The characteristic function of a sum of independent variables therefore gives . In the central large- scaling, , so
Inverting this Gaussian Fourier transform yields
This Gaussian limit of the end-to-end distribution of a freely jointed chain is normalized with respect to , has and , and is valid on the coil scale . If a density of the scalar distance is wanted instead, it is . The Gaussian approximation does not describe the nearly fully stretched tail or the exact finite-chain cutoff at .
For the scattering calculation, radial single-segment distributions together with the given independent-segment assumption imply rotational invariance of the whole chain. Therefore each pair separation has a uniform direction conditional on its magnitude . The same angular average gives
Averaging its magnitude and then summing the pairs proves the required expression for the polymer scattering function:
The ratio has value one at zero separation, including every diagonal term .
The printed gyration formula leaves unsummed. The intended radius of gyration must use a double pair sum, equivalently the mean square distance from the chain's center of mass. To establish that equivalence, put and expand both sides of
Thus the consistent definition is . Expanding gives
Therefore the general small- result is
This Guinier expansion of a polymer scattering function requires isotropy and finite pair moments, but not Gaussian distributions.
For a Gaussian chain, each pair difference across links has variance and characteristic function . Using exactly the scattering sites in the printed double sum, the finite-chain expression is
The closed expression is understood by continuity at , where it equals . The factor counts pairs with , with the prefactor two supplying their reversed order. In this finite-site convention,
This also holds for a freely jointed chain because its link covariances give the same mean square pair distances.
To obtain the complete long-chain scaling function, set and replace contour sums by integrals, keeping fixed as . With ,
The requested Debye scattering function for a Gaussian chain is consequently
exactly for the continuous Gaussian contour convention , and asymptotically for the long discrete chain. Its small- expansion is , agreeing with the general gyration result, and at large . In the continuum coil range this gives . At still larger , the discrete expression instead tends to the self-scattering value one.
There is a harmless finite-size convention in the source: links have endpoints, whereas its scattering sum counts sites. The formulas above retain its scattering normalization; if all endpoints are counted, replace the site count by in the finite formulas. The large- Gaussian distribution and Debye scaling function are unchanged to leading order.
Write the reaction term as and assume . At , multiply the stationary travelling-wave reduction of a reaction-diffusion system by and integrate once. Since at both asymptotic phases and , the integration constant is zero:
The boundary orientation selects . Separating variables gives the logistic front of a bistable cubic equation, with arbitrary center :
The arbitrary translation is expected from translation invariance.
To develop the requested perturbation theory, let with signed , introduce slow time , and put . Seek
where . The explicit derivative of is second order. Since , the first-order equation is
Differentiation of gives . The self-adjoint differential operator has this decaying translation mode, and at both ends because the phases remain exactly and . Multiplying the first-order equation by and integrating by parts makes its left side zero. Therefore the translation-mode solvability for a bistable front requires
Both integrals can be evaluated without a special-function formula. The decreasing profile takes from to and has , so
and
The resulting speed is
This derives the velocity by the Fredholm solvability condition, rather than substituting a guessed speed.
With this value, the forcing actually cancels pointwise: . Thus . The decaying kernel is only the translation direction: an independent solution is , which grows at at least one infinity. Fixing the center by consequently gives . In this particular bistable cubic reaction-diffusion equation the absence of shape deformation holds to all orders. Indeed , and the exact moving-frame equation has left side . Therefore
is the exact front for every . For , and the phase advances to the right; for the phase advances to the left. The small-bias speed is consistent with the prescribed scaling.
The homogeneous fixed point must satisfy . The singular point is outside the domain of the reaction term, so substitution in the other equation gives the unique regular spatially homogeneous equilibrium
This is the basally forced quadratic activator-inhibitor model. The linearization of its reaction terms gives the Jacobian matrix
Put , so . Its trace and determinant are and , and its eigenvalues are
Since , both eigenvalues have negative real part exactly when . Hence
For the equilibrium is always strictly linearly stable. For , equality is an oscillatory threshold with ; the nonlinear qualification at this threshold is proved below.
Now insert a perturbation proportional to . The diffusion terms subtract from . With the mode trace and determinant are
For a strictly stable homogeneous state, makes for all . A nonzero Fourier mode can therefore grow only if , in which case its two real eigenvalues have opposite signs. The determinant parabola has its minimum at , and that minimum is . The two-species Turing criterion is consequently derived here as
These force , hence . Equivalently, solving for gives
Thus the inhibitor in a reaction-diffusion system must diffuse sufficiently fast. Inside this region, the growing wavenumbers obey
At onset, the minimum touches zero and the two determinant roots coalesce. Therefore
Here is evaluated on the onset surface. These are the Turing threshold of a basally forced quadratic activator-inhibitor model and its continuum critical wavelength. On a finite or domain with periodic boundary conditions an admissible nonzero spatial mode must additionally fall in the stated band. Equality in the diffusion criterion is marginal onset, while is the distinct homogeneous oscillatory threshold.
For completeness, the weak focus at the Hopf threshold of a basal activator-inhibitor model resolves the nonlinear homogeneous stability when . Let , , , and set , , , . Expanding the rational reaction term to cubic order gives
where
Write , and evaluate these homogeneous polynomials on the unit circle. If , , and , division of the radial and angular equations gives
The angular integral of is zero because it changes sign under . Iterating its quadratic term once over a full cycle contributes the square of this zero integral, so the first nonzero return map term is cubic. Using , and the corresponding sixth moments gives and . The Poincaré map is
Because , sufficiently small positive radii decrease on every return. The equilibrium at is therefore nonlinearly asymptotically stable, with weak rather than exponential attraction, despite its neutral linear eigenvalues. The strict inequalities above describe the ordinary diffusion-driven instability from a strictly linearly stable homogeneous state.
Take positive in the snail's direction of travel, and let measure height above the rigid plane. The wave moves at laboratory velocity . In the wave frame the plane's horizontal velocity is and the foot's is . The foot is stationary as a shape, so its material velocity is tangent to : to leading lubrication theory order its components are . Apply the no-slip boundary condition to both surfaces.
The leading Stokes flow equations are and . Their solution is the local Couette-Poiseuille flow
The normal-velocity condition on each steady surface and incompressibility make the wave-frame flux independent of . Integrating the velocity gives
Put . Periodicity of pressure gives , and hence
The shear traction exerted by the fluid on the plane, positive in the direction, is
The snail is force-free horizontally: its gait consists of internal motion and it has no externally applied horizontal drive. Uniform locomotion therefore requires zero net horizontal fluid force on the foot per wavelength. The stresses on opposite periodic fluid faces cancel, so horizontal momentum balance also makes the net force on the plane zero. Thus
Substitution of proves the lubrication model of a crawling snail:
The Cauchy-Schwarz inequality applied to and gives , with equality exactly for a uniform gap. Thus the denominator is positive, and a nonuniform waveform gives forward motion; the flat gap gives .
For the sinusoidal shape, the given integrals yield
Therefore and
For small amplitude, : the leading locomotion is quadratic, and there is no propulsion from a flat foot. As , , so the wave becomes nearly stationary in the laboratory frame while the snail advances relative to it. However, the minimum gap tends to zero; finite speed in this limit does not imply finite dissipation, and itself is excluded by the noncontact model.
For the general waveform, use the mechanical work identity for viscous dissipation. Pressure does no boundary work because the boundary motion is tangential in the wave frame. The plane's velocity is constant, and its total force is zero, so it contributes zero net work. The upper boundary supplies, at leading lubrication order,
The zero plane-force relation is . Consequently
As a direct check, integrating the squared shear rate gives , which reduces to the same result using the force-free speed relation. Zero horizontal force on the foot does not mean zero gait work: the tangential material velocity along its sloping surface includes vertical motion.
For prescribed speed and sinusoidal shape, eliminate to obtain
Writing , the logarithmic derivative of the amplitude-dependent factor is
The only root in is . The dissipation diverges at both endpoints, so this is the global minimum and gives the optimal sinusoidal waveform for viscous snail locomotion:
The magically driven flat glider has simple Couette flow in the laboratory frame, and dissipation per wavelength. Hence
The comparison is at the same , mean thickness and wavelength ; the flat glider is externally propelled, whereas the snail must power its internal waveform.
Let the undisturbed water surface be , the oil's upper surface and its lower surface , so . Leading hydrostatic pressure in the nearly inviscid water is relative to atmospheric pressure; in the oil it is . Equality at the interface gives , hence
Thus the horizontal hydrostatic driving gradient is
This reduced gravity accounts for most of the oil thickness being below the undisturbed water level.
Because the oil is much more viscous than the water and air, tangential tractions on both faces are negligible. In a thin layer, the leading horizontal velocity is consequently independent of depth: the floating extensional viscous gravity current is a plug, rather than the parabolic profile of a no-slip gravity current. Integrating incompressibility between the moving material boundaries, and using their kinematic boundary condition, gives conservation of oil volume,
To derive the factor in the extensional balance, incompressibility gives . The Newtonian fluid stress tensor has . Normal-stress balance relative to the hydrostatic part therefore requires . The horizontal stress then satisfies
Thus the longitudinal tensile force in an oil slice, relative to its hydrostatic pressure, is per unit width. Balancing its difference across the slice with the horizontal driving force yields
The coefficient is the planar extensional Trouton ratio, arising from both the direct horizontal strain and the pressure correction required by the transverse normal-stress condition.
Using the pressure gradient above, integration in gives
The stated nose stress condition sets , not an arbitrary imposed inlet tension. Consequently
For a material slice injected at time , let be its age. The thickness equation along its Lagrangian trajectory is , with at injection. Define
Then . The slice injected during has volume per unit width, so at fixed observation time ,
Since a newly injected slice has , integration and subsequent differentiation along a material slice give the constant-flux floating extensional gravity current:
The oldest slice forms the nose. Measuring time from the start of injection, there, so
Its speed is exactly the material velocity at the nose, as required.
For a fixed position behind the nose, the age needed to reach it is determined by , independently of the observation time. Hence both thickness and velocity become stationary there once the nose has passed. Eliminating gives
Their product is , so the steady profile carries precisely the inlet volume flux; integrating it to gives the total injected volume .
The length
is the horizontal distance over which reduced-gravity driving causes an order-one change in inlet speed and thickness by viscous extension. The associated age is ; the exact profile contains . It is an extensional adjustment length, not a shear-diffusion scale. The result applies while the stated thin-layer and negligible-inertia approximations remain valid.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact