Genetic linkage 2026-10-13
Why can two individually fair allele transmissions fail to be independent? Genetic loci on the same chromosome can travel together through meiosis. This tendency is genetic linkage; in an ordinary two-locus model, detectable genetic linkage means a recombination fraction below . A genetic marker can therefore help track a neighboring genetic locus through a pedigree. See Clark, Douglas and Choi, Biology 2e: chromosomal theory and genetic linkage.
Take a diploid individual heterozygous at two genetic loci, with phase-known genotype : one homologous chromosome carries alleles , the other . The parental haplotypes are ; the recombinant haplotypes are . Assume fair Mendelian segregation, equal probabilities within each reciprocal pair of gametes, and no allele-dependent differences in gamete recovery. If the recombination fraction is , the gamete probabilities are in that order. Each genetic locus still transmits its two alleles equally, but exceeds : fairness at each genetic locus does not imply independence between genetic loci.
At , only the parental haplotypes occur, each with probability : this is complete genetic linkage. At , all four haplotypes have probability , giving independent assortment. A recombination fraction near alone cannot establish whether the genetic loci lie on different chromosomes or far apart on one chromosome.
Genetic linkage concerns joint transmission through meiosis. Linkage disequilibrium concerns haplotype frequencies in a population, while genetic association compares allele or genotype frequencies with a phenotype. These questions require different observations; pedigrees directly reveal co-transmission.
Genetic map 2026-10-13
A genetic map turns observations of inherited haplotypes into an ordered account of genetic loci along a chromosome. Its distances describe genetic recombination, which makes the map useful for locating a genetic locus relative to known genetic markers. A genetic map measures inheritance separation; separation measured in base pairs describes positions along DNA. Recombination hotspots help explain why equal numbers of base pairs need not give equal genetic map distances. See T. A. Brown, Genomes, 2nd edition (2002), chapter 5: Mapping Genomes.
Write for the expected value of the number of chromosomal crossovers encountered along one transmitted chromatid between the chosen genetic loci, measured in morgans; is the distance in centimorgans. This counts exchanges along that transmitted chromatid, rather than all exchanges in the four-chromatid meiotic bundle. For a short interval with very few multiple exchanges, the recombination fraction satisfies : about recombinant gametes then corresponds to about one centimorgan.
For a longer interval, hidden even numbers of chromosomal crossovers make that approximation inaccurate. Under the Haldane mapping function, morgans gives ; conversely gives morgans, or centimorgans. Applying the inverse formula to an already specified genetic map distance would confuse a count with a probability.
Genetic map distances add along ordered adjacent intervals because the total exchange count is the sum of its interval counts. For independent random variables describing counts in disjoint intervals of the Haldane mapping function model, the endpoint recombination fraction instead obeys
Exactly one interval must change parental origin. Thus gives , although the two genetic map distances add to approximately morgans. The simple composition formula requires the stated independence; crossover interference can invalidate it.
Genetic recombination 2026-10-13
Genetic recombination rearranges inherited genetic material into new combinations. In the meiosis example considered here, chromosomal crossover exchanges segments between nonsister chromatids of homologous chromosomes. A transmitted chromatid can consequently contain DNA from both parental homologues. This produces new haplotypes without requiring a new mutation at either scored genetic locus. See Meiosis.
For phase-known genotype , a single chromosomal crossover between the selected genetic loci can yield and on the participating chromatids; the other two chromatids can remain and . Thus an exchange in the four-chromatid bundle does not mean every resulting gamete is recombinant. Only a chromosomal crossover encountered along the transmitted chromatid within the selected interval affects its two-locus score.
Follow parental origin along the transmitted chromatid from the first genetic locus to the second. Each exchange switches that origin. An odd number of such chromosomal crossovers changes the endpoint combination; an even number restores parental phase. Two exchanges can therefore leave the scored haplotype as even though an internal segment came from the other parental homologous chromosome. Recombinant status is relative to the chosen genetic loci, not a complete record of exchanges along the chromosome.
This integer parity distinction connects the physical process of genetic recombination to the observed recombination fraction. It also explains why a long genetic map interval can accumulate many exchanges while its endpoint recombination fraction approaches in the Haldane mapping function model.
Haplotype estimation 2026-10-14
Haplotype estimation reconstructs which alleles share a chromosome from observed genotypes and other information, such as pedigrees. A doubly heterozygous genotype can be or ; a phase-known genotype distinguishes them. Uncertainty in that reconstruction must propagate to estimated haplotype frequencies and linkage disequilibrium.
Independent assortment 2026-10-13
Independent assortment means that transmission at different genetic loci has conditional independence given the parental genotype. With fair Mendelian segregation, a parent heterozygous at two genetic loci, , produces gametes with probability each. For example,
Here labels an allele combination; it does not assert that the two genetic loci lie on the same chromosome.
The physical model is stochastic orientation of different homologous chromosome pairs toward the two poles of the spindle apparatus in meiosis I. One pair's orientation does not determine another's. For two pairs, one division can send together and together; another can send together and together. See The Process of Meiosis (§11.1, Metaphase I and Figure 11.5: random orientation of chromosome pairs).
Figure 1. . Original schematic for two separate chromosome pairs, fair independent orientations, no chromosomal crossover, and symmetric divisions. Fixing at the left pole removes the duplicate obtained by reversing both poles. Each displayed orientation has probability . A single division gives two copies each of two complementary combinations; all four equally likely combinations appear across divisions. Details.
With distinguishable homologous chromosome pairs, there are choices of parental homologous chromosome origin for a product at a specified pole, each with probability under this model. For , enumerate , where M and P mark parental origins. Whole-pole reversal pairs complementary choices, leaving unordered partitions for . For there are four choices for a specified pole but only the two relative orientations drawn. This counts possible products across meioses, not eight different products of one division when . Identical alleles at scored genetic loci can also make different parental-origin choices observationally indistinguishable.
Independent assortment of different chromosome pairs does not imply independence of every pair of genes. Nearby genetic loci on the same chromosome can show genetic linkage. Chromosomal crossover can create new haplotypes, but does not automatically erase genetic linkage. See Laws of Inheritance (§12.3, Law of Independent Assortment and Linked Genes Violate the Law of Independent Assortment). In the ordinary fair two-locus model with parental haplotypes and recombination fraction ,
Thus gives only the two parental haplotypes, while gives four equal probabilities. A recombination fraction of alone does not establish that the genetic loci lie on different chromosomes.
A motivating experiment appears in Experiments in Plant Hybridization by Gregor Mendel (§9, “The Reproductive Cells of the Hybrids”). In peas, hybrids for round versus wrinkled seeds and yellow versus green seeds were crossed reciprocally with constant wrinkled-green plants. The readout was visible seed shape and color: hybrid seed parents gave 31 round-yellow, 26 round-green, 27 wrinkled-yellow and 26 wrinkled-green; the reciprocal cross gave 24, 25, 22 and 27.
The apparatus was controlled pollination: opening immature flowers, removing stamens with forceps, and applying selected pollen to the stigma. Two-year trials established constant parental characters; greenhouse pots checked interference from insects in outdoor beds. Reciprocal crosses tested both transmission directions. These procedures are described in Experiments in Plant Hybridization by Gregor Mendel (§§2–3).
With complete dominance at both genetic loci, this test cross makes each phenotype report one hybrid gamete combination. The ideal expected values are and per class. The observations support four transmitted combinations, approximately equally frequent. They do not directly image chromosome orientation or prove independence for all genes; failed development and seed germination also limit the inference, as §9 notes.
Linkage disequilibrium 2026-10-13
Linkage disequilibrium means that knowing an allele at one genetic locus changes the probability of an allele at another genetic locus in population haplotypes. It compares their joint probability distribution with the product of their marginal distributions. This is useful because a genetic marker can carry information about another genetic locus: tag SNPs exploit this redundancy, without establishing a causal genetic association.
Consider two genetic loci with alleles and . Sample one haplotype, rather than an unphased diploid genotype. Write its four haplotype frequencies as , summing to one, and set the marginal allele frequencies to and . The linkage disequilibrium coefficient is
The second expression follows by substituting . The entire two-locus joint probability distribution is then
Every row and column sum is unchanged when varies. Linkage equilibrium means : all four haplotype frequencies equal products of allele frequencies, so the two allele indicators are independent random variables. For , the conditional probability shows directly how positive enriches among copies carrying , while negative depletes it. Positive also enriches ; negative enriches and . Swapping the labels and reverses the sign of , so neither sign is intrinsically favorable.
For example, fix the allele frequencies at . At linkage equilibrium, the haplotype frequencies in the order are . Positive linkage disequilibrium instead gives , with ; negative linkage disequilibrium gives , with . Counting each allele separately would miss the difference.
Nonnegative haplotype frequencies constrain . Define the nonnegative bounds and . The four entries above give
Thus globally, but a particular pair of allele frequencies usually permits a smaller, asymmetric interval. The standardized linkage disequilibrium convention used here retains the sign:
This convention requires ; if either genetic locus has only one allele in the population, but normalized measures are undefined. Some presentations report only . At or , at least one of the four haplotypes has zero frequency; this alone does not prove that genetic recombination has never occurred.
For the indicator random variables and , their covariance is , and their variances are and . The allelic correlation measure is their squared correlation coefficient,
The subscript distinguishes it from the recombination fraction in linkage-disequilibrium decay under recombination. Squaring loses the association's sign. In the illustrated positive and negative examples, in both, whereas and , respectively. For another original example, take : then , yet . Every carries , but most copies carrying lack . The frequency constraints and the distinction between these normalizations are analyzed in Mathematical properties of the r² measure of linkage disequilibrium by Jenna M. VanLiere and others (sections 2.1 and 2.5, pp. 131–132 and 135–136).
Genetic linkage describes transmission through meiosis; linkage disequilibrium describes a population's haplotype frequencies. Nearby genetic loci on a chromosome can be in linkage equilibrium. Conversely, mixing populations can create linkage disequilibrium even between genetic loci on different chromosomes. For example, mix equal numbers of independently sampled haplotypes from two populations, each internally at linkage equilibrium, with in one and in the other. The pooled allele frequencies are , but , giving . This is a consequence of population stratification, not a measurement of the recombination fraction.
Measured haplotype frequencies also depend on the sample. Finite sample size, related individuals, genetic-study ascertainment, genotyping error and uncertain haplotype estimation can change an estimate. A missing rare haplotype can give empirical without demonstrating its absence from the population. Report the sample definition and allele frequencies alongside the association measure; a nonzero sample estimate alone does not establish nonzero population linkage disequilibrium.
A concrete dataset is the 2005 A haplotype map of the human genome by The International HapMap Consortium. The International HapMap Consortium used genotyping platforms including Illumina BeadArray to obtain SNP genotype calls from 269 DNA samples across four collections: 30 parent–offspring trios from Ibadan, 30 trios from Utah, 45 unrelated individuals from Beijing and 44 from Tokyo. Parent–offspring trios and the PHASE algorithm supplied haplotype estimation, rather than direct observation of every chromosome. In Figure 7, 36 SNPs resolve seven haplotypes in a chromosome 2 region in the Utah panel; seven tag SNPs capture the 36 SNPs at . The readout demonstrates reusable allelic correlation, not causal effects.
Controls required over 80% complete calls, at most one discordance among five duplicate genotypes, at most one Mendelian segregation error per trio panel, and a Hardy-Weinberg equilibrium test with ; blind reassessment checked performance. Minor allele frequencies of at least 0.05 were targeted, the collections were not population-representative, and inferred haplotypes retain phase uncertainty. These limits restrict extrapolation of linkage disequilibrium.[ref]
Meiosis 2026-10-13
Meiosis reduces two sets of chromosomes to one. In the ordinary diploid life cycle, this makes it possible for fertilization of two haploid gametes to restore the diploid state rather than double the number of sets in every generation. Its two divisions perform different tasks: meiosis I separates homologous chromosomes, whereas meiosis II separates sister chromatids. One round of DNA replication precedes both divisions; there is no second round between them. See [ref].
Two homologous chromosomes carry corresponding genetic loci, potentially with different alleles; two sister chromatids originate by DNA replication of one chromosome. After chromosomal crossover between nonsister chromatids, the sister chromatids need not carry identical alleles everywhere. Separating the two relationships explains why a haploid product of meiosis I still contains replicated chromosomes.
Figure 1.
One DNA replication followed by homologous chromosome separation and separation of sister chromatids
. Original simplified model with two homologous chromosome pairs, no chromosomal crossover, and symmetric divisions. The four final compartments represent haploid products, not four functional ova. Human oogenesis uses unequal divisions, retaining most cytoplasm in one developing ovum and producing polar bodies. Details.
The two divisions explain Mendelian segregation; variable orientation of different homologous chromosome pairs connects it to independent assortment. Genetic recombination adds another source of allele combinations. These mechanisms reshuffle inherited material without requiring a new mutation.
The symmetric diagram is useful for counting, but human oogenesis produces one functional ovum rather than four. The polar bodies receive discarded chromosomes and little cytoplasm. See Human Reproductive Anatomy and Gametogenesis (§43.3, Oogenesis and Figure 43.13: unequal divisions and polar bodies).
Meiotic DNA content 2026-10-13
Ploidy counts sets of chromosomes; DNA amount counts material. Let be the number of chromosomes in one complete set and the DNA amount of one unreplicated set. For the ordinary diploid model, read each row per completed cell nucleus, not as a total across all products:
StagePloidyDNA amountChromosome organization
Before DNA replicationTwo unreplicated sets
After DNA replicationTwo sets; each chromosome has two sister chromatids
After meiosis IOne replicated set
After meiosis IIOne unreplicated set
In the illustrated example, the starting biological cell has four chromosomes. DNA replication gives eight chromatids, organized into four replicated chromosomes. Each product of meiosis I has two replicated chromosomes, hence four chromatids; each final product has two unreplicated chromosomes. Across completed products, after meiosis I and after meiosis II: division redistributes the replicated DNA. A haploid cell nucleus can therefore have without becoming diploid.