Scattering vector Created 2026-10-20 Updated 2026-11-05
The scattered minus incident wavevector. In elastic optical scattering, for scattering angle , refractive index and vacuum wavelength . A dilute diffusing-particle field correlation decays at rate in the single-scattering limit.
SLAC-MIT spectrometer readout and corrections Created 2026-10-18 Updated 2026-10-20
A movable magnetic spectrometer selected scattered electrons by momentum and scattering angle. Magnetic fields dispersed momenta at the focal plane. With relativistic electrons, the inferred momentum determines outgoing energy . Commissioning included steering the beam through the spectrometer at zero angle to check its optics and accepted solid angle. Counters sorted events into momentum and angle bins. The acceptance entered the conversion from counts to differential scattering cross-sections.[ref]
Figure 1. . Original schematic, not an engineering drawing. The magnetic spectrometer measures the outgoing electron; the inclusive final hadron state is unobserved. Details.
Radiative corrections matter because photon emission can move events from an elastic scattering peak into lower outgoing-energy bins. The analyses subtracted the elastic radiative tail before unfolding inelastic radiation. Independent MIT and SLAC procedures provided a check. An uncorrected low- tail alone therefore cannot establish deep inelastic scattering.[ref]
Small-angle neutron scattering Created 2026-10-20 Updated 2026-11-05
Small-angle neutron scattering probes structure using a neutron beam deflected through small scattering angles. For elastic scattering at wavelength , if is the full angle between incident and scattered beams, the transferred wave vector has magnitude
The corresponding structural length scale is roughly , so a small angle accesses larger structures than an atomic-scale diffraction angle at the same wavelength.[ref]
A collimated neutron beam with selected wavelength passes through the sample; a distant position-sensitive detector records the angular distribution. Comparing different sample-to-detector distances accesses different ranges. The measured intensity depends on neutron scattering length density contrast, shape and spatial correlations, rather than giving a direct photograph. Subtracting background and specifying the measured range are essential to interpreting a fitted size or correlation length.[ref]
Thomson electron transmission diffraction experiment Created 2026-10-18 Updated 2026-10-20
Alongside the 1927 Davisson–Germer experiment, George Paget Thomson developed an independent transmission test. Alexander Reid first used celluloid; Thomson used thin metal films. A narrow electron beam crossed a film about thick, reaching a photographic plate perpendicular to the beam. Rings appeared. Accelerating voltages of – set the de Broglie wavelengths; metal structures known from X-ray diffraction allowed quantitative comparison. A downstream magnetic field deflected ring-forming electrons like those passing through holes, identifying the carriers as electrons rather than X-rays. Celluloid's uncertain structure limited its quantitative interpretation.[ref]
The Davisson–Germer experiment uses crystal reflection and angular electric current scans; this transmission camera records a spatial pattern behind the specimen. Both probe interference in electron diffraction, with different specimen preparations and readouts. A developed photographic plate records accumulated detections, not a direct image of the wavefunction.
Why rings? In an ideal film containing many small crystals with uniformly distributed orientations, a family of lattice planes with spacing can satisfy Bragg's law at every azimuth about the incident beam. First-order elastic scattering then forms a cone of opening half-angle , where . A flat detector a distance downstream cuts this cone in a circle:
The last expression requires small scattering angles. It explains a useful control: hold the specimen and camera distance fixed, increase accelerating voltage, and the ring radii should shrink with the electron accelerating-voltage wavelength. It predicts positions, not intensities: preferred crystal orientations, film thickness and repeated quantum scattering can alter a real pattern.
For a chosen example, take and . The exact relativistic electron accelerating-voltage wavelength gives at and at . The corresponding exact ring radii are and . These are calculated examples with chosen spacings and camera distance, not Thomson's measurements. The higher voltage lies outside the range quoted from his lecture, deliberately illustrating a prediction rather than reconstructing his data.
Figure 1.
Calculated electron diffraction rings shrink as accelerating voltage increases
. Original transmission geometry and calculated first-order ring positions for chosen plane spacings and at camera distance . Both detector views have identical scales. Exact relativistic de Broglie wavelengths and determine the radii; ring brightness and width are drawing choices. The geometry sketch exaggerates the scattering angles. No experimental data or borrowed diffraction photograph is plotted. Source. Details.
Consider one chosen model at a fixed total energy, with two open scattering channels, no absorption and no omitted outgoing modes. Channel 1 leaves the target unchanged; channel 2 excites it. Let and . For the same projectile mass, conservation of energy then requires a target excitation . These are hypothetical parameters, not a fit to a particular atom. Each incoming or outgoing mode is normalized to unit probability current; the outgoing modes will have the angular profiles specified below.
Choose the S-matrix
This phenomenological unitary matrix specifies the channel conversion; it is not derived here from an interaction potential energy. For incidence in channel 1, its first column gives the outgoing flux amplitudes
To recover ordinary wave coefficients relative to an incident coefficient one, undo the velocity normalization:
Thus is allowed: channel 2 travels more slowly. Its outgoing probability current fraction is , not . Renormalizing the unweighted squares would give and , the wrong probabilities. More generally the ordinary coefficient map is , with ; it obeys . The conserved quantity is the squared coefficient norm weighted by velocity, which represents probability current.
Now specify an original angular realization of these two outgoing modes, with scattering angle and no azimuth dependence:
The first normalization follows from , where . These angular profiles define the modes of this model; they are not asserted to follow from Born's approximation or an atomic potential energy. The joint directional probability densities are
Figure 1.
Complex angular amplitudes become channel-resolved scattering intensity
. Original two-channel model. Left: arrows in the complex plane show , the angular factor of . Right: the joint directional probability densities , per solid angle, retain the channel flux weights and . The shaded interval is the cone ; its probability requires the measure , not the area under a curve against degrees. These are chosen amplitudes, not historical measurements. Source. Details.
Suppose a detector accepts the cone , with full azimuth and unit efficiency. Its angular fractions within the channels are
Multiplying the angular fractions by the outgoing flux weights gives
For independent incident events, the expected values are therefore and accepted detections, compared with and over all directions. The remaining expected events fall outside the cone. The chosen incident number makes the expectations integers; actual counts fluctuate. Conditional on a detection inside the cone, the channel probabilities are and , rather than and . Angular acceptance changes the observed channel proportions even with equal detector efficiencies.
Figure 2.
Velocity weighting and angular acceptance determine expected channel counts
. Original model with incident events. Left: raw squared wave coefficients and become conserved outgoing flux fractions and after multiplying by . Right: all-direction expectations and become and inside the cone. Bars show calculated expected values, not a generated sample or experimental counts. Source. Details.
The final atomic states are orthogonal, so ignoring the atomic readout adds the two channel intensities; it does not produce . Coherent paths that reach the same final state can instead interfere, as the existing probability amplitude and quantum superposition examples demonstrate. The distinction is physical distinguishability of final states, not whether the detector operator chooses to display their labels. Flux normalization and angular integration make the scattering interpretation useful: they turn complex outgoing waves into conserved event weights and then into the statistics of a specified detector.
In a nonrelativistic elastic collision of incident mass at speed with initially stationary mass , the centre-of-momentum frame moves at . The projectile's outgoing velocity in that frame has fixed magnitude . Its laboratory velocity tips lie on a circle of radius centred at . For , a tangent from the origin gives the largest laboratory scattering angle, . This geometrical result follows from Galilean velocity addition and conservation of energy.