For one electromagnetic normal mode, and are the annihilation operator and creation operator, with commutator . Their action on normalized number states is
They remove or add one photon, whose energy is . The vacuum state is normalized and obeys . It has no photons, but retains zero-point energy for the quantum harmonic oscillator Hamiltonian . The coherent state is a displaced vacuum state.
For a symmetric confocal optical resonator, the mirror separation equals either mirror's curvature, , so its symmetric fundamental Gaussian beam has
The same optical mode matching calculation applies, now with . Keeping the example's gives and , compared with for the nonconfocal target. With , the two branches become
Again only the positive- branch fits the stated downstream geometry. The confocal target's smaller Rayleigh range means a smaller fundamental beam waist at the same wavelength and a less stringent minimum .
A confocal optical resonator also has transverse normal mode degeneracies: in the ideal paraxial spectrum, increasing transverse order by two shifts the resonance by one longitudinal spacing. Such a cavity can transmit combinations of higher transverse normal modes at a fundamental resonance, so transmitted power alone is a weaker diagnostic of pure fundamental optical mode matching. The degeneracy does not remove the complex beam parameter matching requirement if the objective is specifically the symmetric fundamental Gaussian beam.
The source optical resonator has Rayleigh range
The symmetric target optical resonator has its fundamental Gaussian beam beam waist halfway between the mirrors. At distance from that beam waist, wavefront curvature is . Thus
Here , so b gives two real branches:
Only the first branch has the target beam waist downstream of the optical lens. It is also geometrically accessible: the optical lens is beyond the source output mirror, and the target input mirror is beyond the optical lens. The total separation between beam waists is .
Propagate from one beam waist to the other, using the optical lens ray transfer matrix:
Optical mode matching requires to transform to . Multiplying the denominator across gives
Equating real and imaginary parts and multiplying by yields
Set . The second equation gives . Substituting this into the first cancels the terms :
Consequently the two algebraic branches are
Equivalently, . The signs in and are the same. Real solutions require ; a converging optical lens therefore needs . At equality . For the stated arrangement, additionally require and that the chosen optical lens position is accessible outside both optical resonators. A negative is an algebraic virtual-waist solution, not a downstream beam waist.
Use the complex beam parameter convention
Here is the wavefront curvature, distinguished from the mirror curvature . In an unfolded propagation coordinate, a concave mirror has the ray transfer matrix : a ray at height changes direction by . The return to the original plane is therefore
The Gaussian beam transformation gives
For , and . The returning Gaussian beam consequently has a beam waist at the same plane, with
This alone does not make it the same Gaussian beam; equal Rayleigh ranges require .
Adding the plane mirror requires a self-consistent optical resonator normal mode, . Since , the fixed-point equation reduces to , giving
For a finite stable Gaussian beam, . The same formula remains valid at , where self-consistency selects . At the geometrical hemispherical limit it predicts ; that marginal boundary has no finite-width stable fundamental Gaussian beam. Thus the source's word “hemispherical” is used for the plano-concave family, including the near-hemispherical case below.
In second-harmonic generation, the quadratic nonlinear polarization contains products of pairs of comb components. Their angular frequencies are
including when . Original comb components have angular frequencies , hence
When the doubled low-frequency region overlaps the original high-frequency region, choosing gives the beat at . More generally the nearest positive beat has angular frequency
which is for the stipulated small offset. For it is , provided the corresponding teeth are in the overlap.
In comb self-referencing, overlap the doubled red part and the original blue part on a photodiode. The beat measures the carrier-envelope offset frequency. Feedback on an intracavity dispersion control or pump setting can set modulo , giving . A phase-sensitive lock or calibrated approach to zero resolves the sign ambiguity of an unsigned beat measurement.[ref]
The coherent optical spectrum must span an octave, , with sufficient overlapping spectral strength after second-harmonic generation. This calls for very short broadband optical pulses, or coherent external spectral broadening. The two branches must preserve optical coherence, overlap in time and polarization, and have adequate phase matching; bandwidth alone does not guarantee a detectable beat.
Put and . At the peak time, , so the exact comb sum becomes
For many occupied normal modes, , replace the sum by an integral with density . Setting and evaluating the Fourier transform of a Gaussian gives
Thus the isolated-optical pulse approximation has
The optical pulse has a Gaussian function envelope and no chirp. Its carrier angular frequency is , and its light intensity full width at half maximum is . Successive envelope maxima have different carrier-envelope phases, consistent with b.
Approximation in the printed assertion. A discrete optical frequency comb gives a train, not one exact isolated Gaussian pulse. Applying the Poisson summation formula to the ideal sum over all integers instead gives
Near , the term dominates when . The other terms are exponentially small but not identically zero. A single Gaussian function used globally would decay between and , whereas the exact light intensity has equal maxima there; this supplies a concrete reason the isolated form cannot be an exact global identity. The extension to negative frequencies is the usual narrow-positive-band analytic-field approximation when .
Use the complex electric field convention and take the locked wave amplitudes to be real and nonnegative after extracting their common phase. Linear superposition gives
The leading factor has unit modulus, so it does not change the light intensity. The triangle inequality bounds the remaining modulus by . Consecutive occupied normal modes attain this bound together at
There is also a peak at . The electric field obeys , although the light intensity is periodic.
The carrier-envelope phase specifies where the carrier oscillation lies relative to the maximum of an optical pulse's envelope. With and , the signed complex-field phase at the envelope maximum is . Consequently,
If instead the real electric field is written , then and the conventionally quoted slip is . These are the same physical shift with opposite phase definitions.
The carrier-envelope phase matters for few-cycle optical pulses, when the largest instantaneous electric field affects strong-field dynamics, for high harmonic generation, and for stabilizing an optical frequency comb. An ordinary cycle-averaged light intensity measurement does not determine it.
An ideal zero-photon number result projects onto the first term in part (b). Consequently
This is a product state, not an entangled success. The remaining ideal outcome has
and leaves . In particular, simply discarding the field outcome does not reproduce the pure heralded Bell state.
The practical requirements are strong coherent coupling of both atoms to the same optical normal mode with stable relative coupling phases, preparation of , and interaction timing on the scale before spontaneous emission or cavity loss destroys quantum coherence. The field must then be measured or extracted after halting the coherent exchange, with enough photon number resolution to distinguish one from two. Otherwise an inefficient detector can mistake a two-photon event for the desired herald. Even ideally the one-photon success probability is at most , so trials must be repeated.
“No photons detected” implies only for the ideal zero-number projection specified above. With loss or finite detector efficiency, no click also includes missed one- and two-photon events and generally leaves a conditional mixed state. Detecting a leaking photon during the interaction is also a different measurement protocol from the end-time projective measurement analyzed here.
Suppose the conditional atomic pure state were a product state
Comparing its four probability amplitudes with gives
The last two equations make all four factors nonzero, contradicting either of the first two. Equivalently, the coefficient matrix has determinant , while a product state has a rank-one coefficient matrix and zero determinant. Thus the atoms are entangled; indeed each reduced density matrix is , making the conditional state maximally entangled.
An ideal projective measurement of the field's photon number selects the coefficient of . Therefore
Whenever this probability is nonzero, normalization of the projected joint quantum state gives the atomic Bell state
up to a common global phase. The maximum heralding probability is , attained at . At a time with , that conditioning event is impossible, so a conditional state is not defined there. The interpretation is a photon number measurement at the selected time; continuous monitoring of escaping photons would instead change the dynamics and require a different model.
Use the resonant interaction picture and define by the one-atom Jaynes-Cummings model in part (a). Equal coupling to both atoms gives the Tavis-Cummings model
The initial state has two excitations and is symmetric under atom exchange. Excitation conservation and this symmetry confine the evolution to
The antisymmetric atomic spin singlet state is uncoupled and unpopulated. Applying the annihilation operator and creation operator gives
The first off-diagonal entry combines two indistinguishable atomic emission paths; the second also includes the enhancement for creating the second photon. Its eigenvalues are . Put and , so . Its exponential is
Applying this to yields
All three states have the same bare energy on resonance, so restoring the free Schrödinger-picture evolution adds only a common global phase. The expression starts at , has initial derivative , and its three squared probability amplitudes sum to one.
Quantize a single electromagnetic normal mode of angular frequency and represent one isolated atomic transition as a two-level system with raising operator . The bare Hamiltonian operator is
The first main approximation is the electric-dipole approximation: the field varies negligibly across an atom, , and the leading coupling is . For states of definite opposite parity, the relevant dipole part is off-diagonal. After choosing operator phases, this gives , with fixed by the transition dipole and the one-photon field wave amplitude.
In the interaction picture, and oscillate at the difference , whereas and oscillate at the sum . The second main approximation is the rotating-wave approximation: near resonance and for , the latter terms average away on the interaction time scale. The resulting Jaynes-Cummings model has
The two-level system and single-normal mode truncations are additional assumptions: other atomic transitions and optical normal modes must be sufficiently far off resonance or weakly coupled. Dissipation is neglected over the interaction time. The retained terms exchange one atomic excitation for one photon, conserving .
After the first Bell-basis measurement and the announced correction, the shared Werner state has visibility . Ideal quantum teleportation through that resource is the depolarizing channel
One way to see this is to separate the singlet branch, which teleports perfectly with the appropriate known correction convention, from , which has no correlations and yields .
The additional Bell-basis measurement at Alice's station has its own independent reliable branch of probability . In its random-label branch the correction averages the four Pauli gates, again giving . Hence the actual teleported density matrix is
On sifted BB84 rounds, Bob measures in Alice's preparation basis. The preserved component gives the correct bit with certainty; the maximally mixed component gives an error with probability . Therefore
For it vanishes; if either parameter is zero it is . The result presumes successful full Bell-basis measurement outcomes and independent stated imperfections, without extra loss, polarization drift or dark counts.
Each source has density matrix
Assume the two sources and the detector's random choices are independent. In the branch both resources are ideal. If either resource is , the remote pair remains after any specified Bell-basis measurement outcome. An ideal detector and the correction of part (b) therefore yield
When the detector instead reports an independent uniformly random label, the corresponding four Pauli gates average the conditional pair to . Thus
Here is the probability of the reliable-detector branch, not its total chance of being correct: that chance is .
For the usual two-setting CHSH inequality, the spin singlet state has correlation and the white-noise part has zero correlation, so . With Alice's axes and Bob's axes , the absolute CHSH inequality combination is . These settings are optimal for an isotropic correlation tensor, giving
This is the threshold for the standard CHSH inequality with optimized projective polarization measurements. The unqualified phrase “the Bell inequality” needs this choice of test; entanglement alone is a weaker requirement, and no claim about every possible Bell inequality is needed for this calculation.
On Bob's polarization qubit, take
Suitable conditional unitary operators are
Indeed , , and . The last minus sign is a harmless global phase.
For an ideal half-wave plate whose fast axis makes angle with horizontal polarization, discard the common phase and use the Jones matrix
It implements at and at . Thus for outcome use two half-wave plates, first then in the propagation direction; for use one at ; for one at ; for use no plate. Ideal retardance is assumed at the photon wavelength, and the setting is chosen after receiving the detector's classical result.
Use the ordered polarization basis and define the Bell states
Regrouping the four-photon quantum state by channel pairs and gives
For instance, projecting channels 2 and 3 on retains the two original terms with inner polarizations and , with opposite signs, leaving . Its squared norm is .
By the same orthonormality argument, each Bell-basis measurement outcome prepares the identically named Bell state in channels 1 and 4, with
Before communication of the outcome, Alice and Bob's density matrix is ; the usable conditional entanglement is established by the announced Bell-basis measurement result. This assumes an ideal complete Bell-basis measurement; ordinary passive linear optics alone does not deterministically distinguish all four polarization Bell states.
An AND gate maps four possible pairs to one bit and loses information, so it is not reversible. A reversible embedding retains both inputs and uses a target bit:
This is the Toffoli gate; initializing computes while preserving enough information to invert the operation.
Classical reversible gates on one or two bits alone cannot synthesize every such operation. Every permutation of two bits is an invertible affine map over the finite field : there are of them, exactly the permutations. Their extensions to a larger register and their compositions remain affine. The nonlinear term in the Toffoli gate therefore cannot be generated. Three-bit reversible gates remove this obstruction, with ancillary bits initialized appropriately.
There is no conflict with quantum universality: one- and two-qubit gates may pass through quantum superpositions and use relative phases at intermediate steps. They are not restricted to permutations of computational basis states at every step. For example the Hadamard gate, T gate and CNOT gate can decompose a Toffoli gate exactly. Thus the classical affine obstruction does not apply to their intermediate unitary operators.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact