Frame definitions and relativistic effects. Let be the inertial frame of Earth and the stationary asteroid, with pointing toward the asteroid. Bob's inertial frame moves at relative to . For two events at Bob's fixed position, , the inverse Lorentz transformation gives
The elapsed proper time on Bob's clock is , so time dilation means : the separation of his clock ticks is larger in Earth coordinates. For a rod at rest in with proper length , a length measurement in uses simultaneous endpoints, . The direct spatial Lorentz transformation gives , hence length contraction:
The simultaneity condition is essential: the endpoint events used to measure length are different from the two clock-tick events used to demonstrate time dilation.
Bob's speed. Food consumption measures Bob's own proper time, . The Earth-frame distance is and the Earth travel time is . Consequently
Putting , , so
The Earth travel time is months. Equivalently Bob measures the contracted Earth-asteroid separation and sees the asteroid approach at , taking to reach him.
Events A and B. Set both coordinate origins at Event A. Alice reaches the asteroid at Event B, travelling at in , so
The Lorentz transformations into Bob's frame give
Here has been used consistently. With the time-positive sign convention, the Minkowski interval is
Thus the Minkowski interval is invariant. It is timelike, as expected for two events on Alice's subluminal worldline. Using the opposite metric sign convention would change both signs together, without changing invariance.
Relative velocity and spacetime diagram. Divide the differential spatial and temporal Lorentz transformations for the same trajectory:
For Alice,
The spacetime diagram uses horizontal and vertical . In these coordinates Bob's worldline is , Alice's is , and the asteroid's is
Thus Alice has slope , while the asteroid has slope . Their intersection is exactly B, . The asteroid later reaches Bob at . These intercepts and gradients show the relativistic velocity addition geometrically.
Translation and rotation. For particles constituting a rigid body, the total linear momentum is
Thus the total external force governs the motion of the centre of mass. About that centre of mass, the angular momentum and applied torque are
where primes denote relative positions and velocities. The derivative of the vector is taken relative to nonrotating axes. The inertia tensor relates angular momentum to angular velocity, . For rotation about a fixed unit direction , the moment of inertia is ; it measures the resistance to changing that rotation and gives rotational kinetic energy . The simpler vector relation applies when the rotation axis is a principal axis, not for every orientation of an arbitrary rigid body. These translational and rotational balances must be applied together; a nonzero torque does not replace the net-force equation.
Gyroscope precession. A rapidly spinning gyroscope has a large angular momentum approximately along its spin axis. The torque component parallel to this vector changes its magnitude, while the perpendicular component turns its direction. If the vector undergoes precession with angular velocity , then over its change is the infinitesimal rotation . Hence
This describes direction-changing precession at constant ; any spin-up contribution must be added separately. For perpendicular torque and angular momentum, the precessional component perpendicular to is . The familiar tendency of a supported gyroscope to turn sideways is this vector balance, not the absence of gravitational force.
Wheel-lift threshold without the flywheel. Let be the centre of mass height, half the wheel separation, and the bend radius. The required inward force is , provided by static friction. Let be the summed outer and inner wheel normal forces. Vertical balance gives . Moment balance about the centre of mass gives
The inner wheels lift when . Thus the vehicle rollover threshold is
The stated mass cancels. This assumes the rigid geometry and sufficient static friction specified in the paper; the threshold is set by loss of contact, not by sliding.
Engine flywheel. The moment of inertia of a uniform disc gives
Its spin angular speed, spin angular momentum, and turn angular speed at are
The transverse flywheel axis is perpendicular to the vertical turn axis, so
To specify its direction, use right-handed axes forward, to the car's left, and upward, and consider a left turn. Then . Choose the flywheel angular momentum to the car's right, . The car must apply
to obtain the required precession. This gyroscopic roll torque in a turning vehicle opposes the outward roll tendency in a left turn. By the right-hand rule, the flywheel must turn counterclockwise viewed from the car's right side toward its centre, opposite to the rotation of wheels rolling forward. Reversing flywheel spin would aggravate the outward roll. Reversing the turn reverses both roll and gyroscopic torques, so the same flywheel spin remains helpful.
Figure 1.
Gyroscope vector directions for a left-turning car and the flywheel spin needed to oppose outward roll
. Details.
For comparison, the outward inertial roll moment at the stated speed is , and the limiting gravitational restoring moment is . The gyroscopic reaction is about of the former and of the latter, so it is appreciable for this large flywheel. If this ideal model is extended to include the favorable gyroscopic reaction in the wheel-lift condition, it gives , or about rather than . This quantifies a useful but finite increase in the rollover threshold.
The tunnel is taken thin enough that removal of its material does not significantly disturb spherical symmetry. For , the enclosed mass is
By the spherical shell theorem, the inward gravitational acceleration has magnitude
The released gravitational potential energy is the positive work done by gravity while the mass falls from radius to :
By conservation of mechanical energy,
Inside the cavity, the spherical shell theorem gives zero gravitational field, so the velocity stays constant. The original figure places B and C at opposite ends of a cavity diameter, a distance apart. Therefore
The quantity has units , so this is a time. There are no numerical values for or in the paper. The transit time is independent of and the falling mass . The cavity's gravitational potential is constant, not necessarily zero; only its gradient vanishes. The calculation is a hollow-sphere gravitational transit.
For a diffraction grating with illuminated lines in order , its ideal spectral resolving power is
The two spectral lines have separation and mean wavelength . In first order, , so the Rayleigh criterion requires
With line density , the ideal continuous estimate for the illuminated width is
Rounding the required number of illuminated grating lines upward gives lines, conventionally an illuminated width . Using the longer wavelength rather than the mean also gives the same integer requirement. This is the ideal limit set by the resolving power of a diffraction grating; additional broadening from the illumination or observing apparatus could require a larger width.
Let the cylinder length be , cross-sectional area , and the fluid mass density . At floating equilibrium, Archimedes' principle gives
For a small downward displacement from this equilibrium, the displaced fluid volume increases by . The additional upward buoyant force is , and Newton's second law becomes
This is simple harmonic motion, with angular frequency and oscillation period
The result for vertical oscillations of a floating cylinder is independent of its cross-sectional area and fluid mass density because those quantities cancel using the known immersion fraction. It neglects drag, surface effects and the extra fluid inertia from the motion; the cylinder must remain partly immersed throughout the small motion.
The original diagram shows two equal balls, each of mass , attached to the fixed upper pivot and light sliding collar by four equal rods. Each ball describes a horizontal circle of radius . The pivot-to-collar distance is , so the upward collar displacement compresses the spring by
Thus Hooke's law gives a downward spring force on the collar. Let be the tensions in the upper and lower rods attached to one ball. Vertical force balance on the light collar and then on either ball gives
The radial force on one ball supplies its centripetal acceleration:
For , adding the vertical-balance results and eliminating the rod tensions gives
For the given centrifugal governor, and
Hence
The factor of two in the collar balance matters: both lower rods support the same light collar. The spring force is not an extra downward force of this full magnitude on each ball; its effect on each ball is transmitted through its own lower rod. The formula is the steady spring-loaded centrifugal governor balance.

There are unlisted articles, also show them or only show them.