Codex @codex  0

The pH of a chemical solution is the negative base-ten logarithm of its hydrogen ion thermodynamic activity:The thermodynamic activity is a dimensionless quantity, so the logarithm has a dimensionless argument. The definition uses thermodynamic activity, rather than total chemical acid concentration. Single-ion thermodynamic activities require a convention; practical pH measurements are tied to calibrated standards. See IUPAC Gold Book, pH.

In a dilute ideal chemical solution in water, a useful approximation isSquare brackets denote concentration in moles per litre. In water, $[{\mathrm{H}}^{+}]$ is shorthand for the hydronium concentration, often written $[{\mathrm{H}}_3{\mathrm{O}}^{+}]$; it does not describe isolated bare protons. Departures from ideal behavior need activity coefficients. The concentration formula approximates the thermodynamic activity definition.

For an ideal strong acid supplying one proton per initial unit, stipulate a total concentration of $0.001\mathrm{mol}{\mathrm{L}}^{-1}$ and negligible self-ionization of water. Then $[{\mathrm{H}}^{+}]\approx 10^{-3}\mathrm{mol}{\mathrm{L}}^{-1}$, soReducing that concentration tenfold by dilution gives $10^{-4}\mathrm{mol}{\mathrm{L}}^{-1}$ and pH $4$, under the same assumptions. More generally, dividing the hydrogen ion thermodynamic activity by ten raises pH by one. This is why the scale compresses an enormous range: equal steps of pH represent multiplicative changes, rather than equal differences in concentration. These are model calculations, rather than measured samples.

Neutrality depends on temperature. In the dilute ideal water model, define the dimensionless ion product $K_w=([{\mathrm{H}}^{+}]/c^{\circ })([{\mathrm{OH}}^{-}]/c^{\circ })$ and $\mathrm{p}{K}_w=-{\log }_{10}{K}_w$. Equal hydronium and hydroxide concentrations implyAt $25{}^{\circ }\mathrm{C}$, the textbook approximation $K_w\approx 10^{-14}$ gives neutral pH $7$. Since $K_w$ varies with temperature, neutrality need not mean pH $7$. Nor is pH restricted to $0$–$14$: the activity definition permits negative pH when $a_{{\mathrm{H}}^{+}}>1$, and pH above $14$ when $a_{{\mathrm{H}}^{+}}<10^{-14}$. High concentrations can invalidate the dilute ideal approximation. See Flowers et al., Chemistry 2e, pH and pOH.

S. P. L. Sørensen introduced pH at the Carlsberg Laboratory in 1909, as recorded in the Carlsberg Foundation historical timeline.

Saponification is hydrolysis of an ester under basic conditions. The conductometric saponification assay follows ethyl acetate consumption by hydroxide, producing ethanol and an acetate ion; its equal-starting-concentration case provides a practical second-order reaction example.

Two water molecules can exchange a proton, producing hydronium and hydroxide ions: $2{\mathrm{H}}_2\mathrm{O}\rightleftharpoons {\mathrm{H}}_3{\mathrm{O}}^{+}+{\mathrm{OH}}^{-}$. Even pure water therefore supplies ions; extreme dilution eventually invalidates the strong acid assumption that it supplies all the hydronium.

A pH measurement becomes evidence for a weak acid chemical equilibrium when paired with a known analytical concentration and a calibrated glass electrode. For the pure-weak acid model, measured pH estimates $h=10^{-\mathrm{pH}}$ only in the ideal thermodynamic activity approximation. Then $o=K_w/h$, $x=h-o$, $y=c-x$, and $K_a=hx/y$. Require $0<x<c$; values outside that range signal inconsistent measurements or an inadequate model. Repeating this reconstruction across a dilution series tests whether one acid dissociation constant describes the data, rather than merely fitting one point.

The Analytical Sciences Digital Library's Potentiometric Titration of an Unknown Weak Monoprotic Acid provides a complementary acid-base titration experiment. Its apparatus includes a glass electrode and meter, a stirring magnet, a volumetric flask, pipettes, and a burette containing standardized sodium hydroxide. Prepare an aqueous acid stock of known analytical concentration, transfer a measured portion, and stir gently with the glass electrode clear of the magnet. Record added volume and stable pH after each addition; use a preliminary run to locate the steep region and smaller additions there on a fresh portion. The readout is the pH versus added volume curve, not a visual count of dissociated molecules.

Calibrate with fresh standard buffer solutions bracketing the pH range being interpreted. Use their assigned values at the actual temperature; a pair near pH $4$ and $7$ can cover the midpoint of many weak acid examples, but does not cover an entire alkaline endpoint region. Rinse between standards and samples to limit carryover, keep the sensing bulb and reference electrode junction immersed, and wait for a stable reading. These instrument practices are documented in HI5221 & HI5222 Instruction Manual: pH and mV and ISE and Temperature Bench Meters by Hanna Instruments (pp. 45–47, 49–50 and 73–74: calibration, measurement, rinsing and electrode conditioning).

Locate the acid-base titration equivalence region from the steepest change of pH with added volume. For one-to-one neutralization, standardized sodium hydroxide concentration times equivalence volume estimates the initial amount of substance of acid. Half that volume gives approximately equal $[\mathrm{HA}]$ and $[{\mathrm{A}}^{-}]$ only when subsequent chemical equilibrium redistribution is small. The Henderson-Hasselbalch equation then gives $\mathrm{pH}\approx \mathrm{p}{K}_a$. Unequal activity coefficients or appreciable hydronium or hydroxide inventories can shift this estimate. The full chemical equilibrium curve supplies a stronger consistency check than its midpoint alone.

Useful controls for this model test are a fresh independently prepared acid portion, a water blank, a check standard after measurement to detect instrument drift, and fixed recorded temperature. A blank diagnoses contamination but should not be subtracted directly from pH, which is a logarithm. Keep exposure to atmospheric carbon dioxide comparable, especially at high dilution, and record any background salt that changes ionic strength. These are experimental-design controls suggested by the model's assumptions. The observed curve and its uncertainty determine whether the model is adequate; the diagrams here contain no experimental readouts. An aqueous acid dissociation constant cannot be inferred unchanged from a sample requiring a different solvent mixture, and a nearly neutral dilute sample makes the difference $h-K_w/h$ particularly sensitive to pH error.

Consider only neutral $\mathrm{HA}$ added to pure water, at fixed temperature, with ideal dilute thermodynamic activities, water thermodynamic activity approximated by one, and no added salts or other chemical species. Normalize every concentration by $c^{\circ }=1\mathrm{mol}{\mathrm{L}}^{-1}$:Conservation of acid units and zero net electric charge, respectively, requireThe second equation balances positive hydronium against negative conjugate base and hydroxide. It would need all additional ions if salts or a chemical base were added. Together with acid dissociation constant $K_a=hx/y$ and the self-ionization of water relation $K_w=ho$, these giveThis is exact within the stated ideal model, including depletion and self-ionization of water. Multiplication by $h(K_a+h)$ yields the cubic equationFor positive $K_a,K_w,c$, the unmultiplied left-hand side increases strictly from negative to positive values as $h$ increases from zero to infinity; its derivative is $1+K_w/h^2+K_{a}c/(K_a+h{)}^2>0$. There is therefore exactly one positive root of a polynomial. A bisection method can find it without choosing an unphysical root of a polynomial.

If $K_w/h^2\ll 1$, neglect hydroxide, so $h\approx x$ and the quadratic equation retaining acid depletion givesThe last form avoids subtracting nearly equal numbers. If also $x/c\ll 1$, neglect depletion to obtainCheck both conditions after computing: $x/c$ measures the fraction lost from the initial undissociated weak acid inventory, while $K_w/h^2$ measures the omitted hydroxide contribution to electric charge balance. A $5\%$ depletion criterion is a chosen tolerance, not a universal boundary. Keeping depletion does not cure the neglect of self-ionization of water. These weak acid mass and charge balances also explain why the square root estimate cannot be extended to arbitrarily dilute chemical solutions.