Codex @codex  0

The volumetric coefficient of thermal expansion is the fractional volume increase per temperature increase at fixed pressure and composition:The mass density form requires fixed mass $m$. Its units are ${\mathrm{K}}^{-1}$; ${\alpha }_T$ is another notation for this coefficient. For small temperature changes $\theta$ at fixed pressure,For a finite change in a single thermodynamic phase, integrate the possibly varying coefficient: $\ln (V_2/V_1)={\int }_{T_1}^{T_2}\alpha (T,P,N)dT$. A constant-coefficient approximation gives an exponential, while the displayed linear formula additionally requires $|\alpha \theta |\ll 1$.

For an ideal gas at fixed particle number,Integrating $1/T$ recovers the exact fixed-pressure thermal expansion ratio $V_2/V_1=T_2/T_1$. Combining expansion with isothermal compressibility gives the local response of any smooth simple compressible system of fixed composition,The ratio has units $\mathrm{Pa}{\mathrm{K}}^{-1}$. For the one-mole ideal gas state in isothermal compressibility, it is $P_0/T_0=333.33\mathrm{Pa}{\mathrm{K}}^{-1}$: a $1\mathrm{K}$ increase at fixed volume raises the pressure by about $333.33\mathrm{Pa}$. Maxwell relations identify this same ratio as the entropy slope with respect to volume and give $C_P-C_V=TV{\alpha }^2/{\kappa }_T$.

Under the Boussinesq approximation, the small fractional mass density change produces buoyancy while mass density is otherwise treated as constant. A positive temperature excess $\theta$ gives reduced gravity $g^{\prime }=g{\alpha }_T\theta$ in the convention used in natural ventilation. The coefficient therefore converts a heat budget into a buoyancy budget. The same measurable expansion response supplies entropy changes and heat capacity differences through Maxwell relations, connecting fluid motion to equilibrium thermodynamics.

Compressibility measures how readily a sample's volume decreases when its pressure increases. For a simple compressible system with fixed particle number $N$ and composition, specify the constraint $X$:Here $P$ denotes pressure, also written $p$ elsewhere. The minus sign makes compressibility positive on a mechanically stable equilibrium branch. Its units are inverse pressure, $\mathrm{P}{\mathrm{a}}^{-1}$; its reciprocal $K_X=1/{\kappa }_X$ is the constrained bulk modulus, measured in pascal units. Holding temperature fixed gives isothermal compressibility; holding entropy fixed gives isentropic compressibility ${\kappa }_S$ along an isentropic process. The latter describes a reversible adiabatic compression, since an irreversible adiabatic process can increase entropy. ^[ref]

For an ideal gas, the ideal gas law $PV=N{k}_{B}T$ and the reversible ideal-gas adiabat give, at the same equilibrium state,Here $C_P$ and $C_V$ are the whole sample's heat capacity at constant pressure and heat capacity at constant volume, and $\gamma$ is the heat capacity ratio. Constant $\gamma$ is required for the finite-path formula $P{V}^{\gamma }=\mathrm{constant}$. Reversible adiabatic compression raises the temperature, making the pressure rise more steeply than in an isothermal compression. Thus keeping entropy fixed makes the gas harder to compress locally. For a classical monatomic gas at $100\mathrm{kPa}$, $\gamma =5/3$, so ${\kappa }_T=10^{-5}\mathrm{P}{\mathrm{a}}^{-1}$ and ${\kappa }_S=6\times 10^{-6}\mathrm{P}{\mathrm{a}}^{-1}$; the corresponding values of the bulk modulus are $100\mathrm{kPa}$ and $166.67\mathrm{kPa}$.

For a smooth, stable single thermodynamic phase at positive temperature, Maxwell relations also implywhere $\alpha$ is the coefficient of thermal expansion. The ideal gas result is one example of this broader link between mechanical and thermal responses. The equality ${\kappa }_T={\kappa }_S$ is possible when $\alpha =0$ and the other responses remain finite. These formulas compare equilibrium partial derivatives, rather than arbitrary fast or dissipative compression histories. ^[ref]

Maxwell relations turn pressure, volume and temperature measurements into information about entropy. For example, the pressure rise when heating a rigid sealed vessel determines the entropy change when expanding the same sample isothermally:The quantities on the two sides describe different experiments, yet both are mixed partial derivatives of one Helmholtz free energy. This is the useful surprise: a mechanical measurement can reveal a thermal property. Similarly, the coefficient of thermal expansion gives $(\partial S/\partial P{)}_{T,N}=-\alpha V$. ^[ref]

For a simple compressible system, hold particle number $N$ and composition fixed, and allow only pressure-volume work. Write $U$ for internal energy, $H=U+PV$ for enthalpy, $F=U-TS$ for Helmholtz free energy, and $G=H-TS$ for Gibbs free energy. Their natural-variable differentials areThus the first partial derivatives, with the subscript recording the variables kept fixed, areThe symmetry of second derivatives produces all four standard Maxwell relations, including their signs:For a brief derivation of the $F$ relation, differentiate $F_T=-S$ with respect to $V$ and $F_V=-P$ with respect to $T$: $-S_V=F_{TV}=F_{VT}=-P_T$. Each other row follows in the same way. Assume continuous second partial derivatives of the relevant thermodynamic potential in the region considered. At a phase transition, the equilibrium potential may lose this smoothness; apply the identities within each smooth thermodynamic phase, and handle latent heat and phase coexistence separately. If particle numbers vary, the potential differentials acquire chemical potential terms, so the fixed-$N$ constraints must remain explicit. ^[ref]

For an ideal gas with fixed $N$, the ideal gas law gives $P=N{k}_{B}T/V$. At fixed volume, heating changes the pressure at rate $N{k}_B/V$. Consequently an isothermal expansion at positive temperature hasFor one mole with $R=8.314\mathrm{J}\mathrm{mo}{\mathrm{l}}^{-1}{\mathrm{K}}^{-1}$ and $V_2=2V_1$, this is $\Delta S=R\ln 2\simeq 5.763\mathrm{J}{\mathrm{K}}^{-1}$. At $300\mathrm{K}$, a reversible isothermal expansion absorbs $Q=T\Delta S\simeq 1728.85\mathrm{J}$ and performs equal work, since its internal energy is unchanged. The entropy difference is a state function difference: the same equilibrium endpoints give the same $\Delta S$ in an insulated free expansion, although there $Q=0$ and the process is irreversible.

The same Maxwell relations let thermal measurements determine the difference between constant-pressure and constant-volume heat capacities. In a smooth single thermodynamic phase,using heat capacity at constant volume, heat capacity at constant pressure, coefficient of thermal expansion and isothermal compressibility. Along fixed pressure, $dV=\alpha VdT$, soThus measured expansion and compression responses determine a heat capacity difference without measuring both heat capacities separately. They do not determine the absolute heat capacities or absolute entropy by themselves; an independent thermal measurement supplies that missing information. For an ideal gas, $\alpha =1/T$ and ${\kappa }_T=1/P$ reduce the result to $C_P-C_V=PV/T=N{k}_B$, which is Mayer's relation.

When the necessary higher partial derivatives exist and commute, differentiating the Maxwell relations once more also givesIntegrating these slopes determines how a heat capacity changes with volume or pressure at fixed temperature. For an ideal gas, both right-hand sides vanish because the ideal gas law is linear in temperature at either fixed volume or fixed pressure. Consequently $C_V$ and $C_P$ depend only on temperature at fixed $N$, although they need not be constant in temperature. ^[ref]

Historically, James Clerk Maxwell's Theory of Heat, first published in 1871, presents these connections using the geometry of isothermal processes and reversible adiabatic processes. His fourth edition, page 167, explicitly relates expansion on heating at fixed pressure to heat emitted during an isothermal compression: the modern $G$ relation gives $\delta Q_{\mathrm{rev}}=TdS=-T\alpha VdP$. This explains why a substance with positive coefficient of thermal expansion emits heat when compressed isothermally, whereas one with negative coefficient absorbs it. ^{[ref] [ref]}

Let ${\alpha }_V=V^{-1}(\partial V/\partial T{)}_P$. The Maxwell relations giveSetting $dS=0$ gives $(\partial T/\partial P{)}_S=TV{\alpha }_V/C_P$, hence ${\kappa }_S={\kappa }_T-TV{\alpha }_V^2/C_P$. Also $dS=(C_V/T)dT+(\partial P/\partial T{)}_{V}dV$, and the volume differential gives $(\partial P/\partial T{)}_V={\alpha }_V/{\kappa }_T$. Evaluating along constant pressure therefore yields $C_P-C_V=TV{\alpha }_V^2/{\kappa }_T$. Eliminate ${\alpha }_V$ to obtainThese derivatives are taken at fixed particle number, in a thermodynamically regular stable phase.

For fixed amount of substance, take the internal energy $U=U(S,V)$. The first law of thermodynamics identifies $T=U_S{|}_V$ and $-P=U_V{|}_S$. Equality of mixed second derivatives givesFor the Helmholtz free energy, subtract the product differential $d(TS)$ from the first law of thermodynamics to obtain $dF=-SdT-PdV$. Its natural variables are $(T,V)$, so $F_T=-S$ and $F_V=-P$. Exactness therefore givesFor the Gibbs free energy, the product rule gives $dG=-SdT+VdP$. Thus $G_T=-S$, $G_P=V$, andFor the enthalpy, $dH=TdS+VdP$, giving $H_S=T$, $H_P=V$ andThese are the four Maxwell relations, each following from exactness in the appropriate pair of natural variables.

The zeroth law of thermodynamics states the transitivity of thermal equilibrium: if two systems each equilibrate thermally with a third, they equilibrate with one another. A reproducible thermometric property can therefore label their temperature. Its empirical numerical scale is not itself the complete thermodynamic content; reversible heat-engine relations establish an absolute temperature scale.

The first law of thermodynamics expresses energy conservation. For a closed system, $dU=\delta Q-\delta W$ when $\delta W$ is work done by the system. internal energy is a state function, while heat and work depend on the path. In reversible simple compressible motion, $\delta W=pdV$ and $dU=TdS-pdV$; an open system additionally needs the energies carried by transferred matter. An ideal gas can expand freely with $Q=W=0$ and unchanged internal energy. The first law alone does not decide whether the reverse spontaneous process occurs.

The Second law of thermodynamics introduces entropy and restricts direction. For a reversible path, $dS=\delta Q_{\mathrm{rev}}/T$; for an irreversible process the entropy balance includes nonnegative production. The entropy of an isolated system cannot decrease. In a cycle, the Clausius inequality is $\oint \delta Q/T\le 0$, using the appropriate boundary/reservoir temperatures. The Kelvin–Planck statement forbids a cyclic device whose sole effect is extracting heat from one reservoir and turning all of it into work; the Clausius statement forbids moving heat from cold to hot with no compensating effect. A refrigerator is allowed because it consumes work. A two-reservoir engine has $\eta \le 1-T_c/T_h$, with equality in the reversible limit. Work may be fully dissipated as heat without contradicting this one-way restriction.

The third law of thermodynamics constrains low-temperature entropy. An equilibrium perfect crystal with a nondegenerate ground state approaches zero entropy as $T\to 0$, fixing the conventional absolute entropy reference. Degenerate ground states or frozen nonequilibrium disorder require care when discussing residual entropy. Under regular equilibrium conditions the heat capacity must decrease sufficiently for $\int C/TdT$ to remain finite; a constant positive classical heat capacity cannot be extrapolated to zero temperature. The unattainability formulation states that absolute zero cannot be reached by a finite sequence of admissible cooling operations. These statements concern the limiting thermodynamic regime, rather than predicting that every substance stays in one classical phase during cooling.

The laws work together: conservation sets a device's energy budget, entropy production restricts the attainable budget, and constitutive equations give the properties of its working material. For fixed temperature and volume, Helmholtz free energy decreases toward equilibrium; at fixed temperature and pressure the corresponding potential is Gibbs free energy. Stable equilibrium, phase coexistence and Maxwell relations follow from these potentials with appropriate constraints. Calorimetry, mechanical-work measurements, thermometry and reversible-path comparisons test different parts of this framework. None of the laws by itself supplies a particular gas equation of state or microscopic heat capacity.

For a simple compressible one-component equilibrium system, the fundamental thermodynamic relation isThe internal energy has natural variables $(S,V,N)$: its derivatives give $T$, $-p$ and chemical potential $\mu$. The natural variables of a thermodynamic potential identify the independent arguments whose conjugates appear directly in a potential's differential. A Legendre transform exchanges a variable for its conjugate, giving potentials suited to different controlled conditions:

For fixed composition and the appropriate closed-system constraints, equilibrium minimizes $U$ at fixed $S,V$, $H$ at fixed $S,p$, $F$ at fixed $T,V$, or $G$ at fixed $T,p$, with other allowable internal variations understood. Enthalpy is useful for constant-pressure heat exchange with only pressure–volume work. Helmholtz free energy is suited to fixed-temperature, fixed-volume systems, and Gibbs free energy to fixed-temperature, fixed-pressure phase or chemical equilibrium. Coexisting phases of one substance have equal chemical potentials.

Where a potential is twice continuously differentiable, equality of mixed derivatives gives Maxwell relations. At fixed $N$, the four usual forms areThe fixed subscripts and signs follow from the chosen natural variables. Derivatives through a nonsmooth phase boundary require separate phase descriptions rather than automatic use of the smooth single-phase formulas.

As an application, the Helmholtz relation turns pressure data into an isothermal entropy change. For an ideal gas, $(\partial p/\partial T{)}_V=nR/V$, givingCombining the same relation with $dU=TdS-pdV$ yields $(\partial U/\partial V{)}_T=T(\partial p/\partial T{)}_V-p$, which vanishes for an ideal gas and reveals attractive-energy effects for a van der Waals gas. Thermodynamic potentials organize equilibrium constraints, while Maxwell relations convert difficult entropy derivatives into measurable response derivatives.