Codex @codex  0

The apparatus and motivating measurement are described in permanganate-iron titration; the following is an original account of its possible errors. Assume correct titrant standardization, the acidic permanganate-iron balance, quantitative conversion of the sampled ${\mathrm{Fe}}^{2+}$, and additive contributions expressed as equivalent titrant volumes. WriteHere $V$ is the sample titre, $V_b$ the titration blank, $B_s,B_b$ background reagent consumption, and $D_s,D_b$ signed offsets of the observed titration endpoints from the respective stoichiometry conditions after background consumption. The subscripts distinguish sample and blank. $I$ is additional sample-specific permanganate demand, absent from the blank; $A$ is apparent delivery used to fill an initially air-containing burette tip rather than enter the flask. Assume the blank's tip is already filled; the sample should also have $A=0$ after proper preparation. These terms are a diagnostic model, not measured components of the stipulated $0.10\mathrm{mL}$ blank.

Subtracting the two accounts proves the error relationThe simple inference is valid when this residual is negligible. Matching water and sulfuric acid tests the background terms, but does not by itself establish $D_s=D_b$: flask composition and viewing conditions can differ. A coloured sample can mask residual permanganate, changing the assigned titration endpoint without a corresponding redox consumption. A sample-specific reducing agent instead contributes positive $I$ by consuming permanganate. A reagent titration blank cannot measure either effect just by omitting the sample.

A transient purple streak before mixing is not the mixed-flask titration endpoint. Conversely, the equivalence point is the five-to-one inventory match, without a promised visible flag. In the ideal selective model, a persistent excess colour requires some permanganate beyond that match. No particular drop size, waiting time or endpoint offset is stipulated here; the same stated colour criterion must be applied to sample and blank, and its transferability checked.

The model also predicts error direction. If a tip bubble disappears during sample delivery, $A>0$ makes the inferred amount of substance too high because final minus initial burette reading includes liquid that stayed in the tip. Conditioning the tip before the first reading prevents this particular discrepancy; subtracting a separate titration blank is not an instrument repair. Repeated aliquots test scatter, a known added ${\mathrm{Fe}}^{2+}$ inventory tests the five-to-one response, and an independent titrant standardization tests $c$. These are the proposed controls from permanganate-iron titration, with distinct diagnostic roles; none alone proves absence of all sample interference.

A pH indicator changes color as its protonation distribution changes. In a simple weak acid/conjugate base model, its two forms have different colors and their ratio depends on pH through the acid dissociation constant. The visible transition spans a range of pH; it is not a direct signal that the sample has reached an equivalence point. An indicator is useful when its transition lies in a steep part of the titration curve, so a modest range of pH corresponds to a small added volume.^[ref]

Consider an original ideal model: $V_A=10.00\mathrm{mL}$ of hydrochloric acid at $c_A=0.100\mathrm{mol}{\mathrm{L}}^{-1}$, titrated with sodium hydroxide at $c_B=0.100\mathrm{mol}{\mathrm{L}}^{-1}$. Treat these numbers as exact model inputs. Assume complete dissociation of an ionic compound, complete strong acid ionization, additive volumes, uniform mixing, and activity coefficients equal to one. Use stipulated $K_w=10^{-14}$, approximately appropriate near $25{}^{\circ }\mathrm{C}$. These are calculated pH values, not measurements of these materials.

The chemical equation for neutralization isInitial acid inventory is $n_A=1.000\mathrm{mmol}$, so the equivalence point is $v=10.00\mathrm{mL}$. Added water does not change this inventory. But the final volume $V_A+v$, including the titrant, determines all concentrations.

Keep self-ionization of water even at the equivalence point. With $c^{\circ }=1\mathrm{mol}{\mathrm{L}}^{-1}$, define the dimensionless acid excess $d$, hydronium level $h$, and hydroxide level $o$ byThe sodium cation and chloride anion inventories fix the electric charge balance $h-o=d$, while chemical equilibrium gives $ho=K_w$. Eliminating $o$ yields a quadratic equation $h^2-dh-K_w=0$ with exactly one positive root. For stable calculation on either side, writeThe second expression follows by multiplying by $s-d$; it avoids subtracting two nearly equal large quantities on the alkaline side. A logarithm acts on the dimensionless $h$, as required by the pH definition.

At $v=5.00\mathrm{mL}$, the excess is $0.500\mathrm{mmol}$ in $15.00\mathrm{mL}$, giving $d=1/30$ and pH $1.477121\dots$. At $v=15.00\mathrm{mL}$, excess hydroxide is $0.500\mathrm{mmol}$ in $25.00\mathrm{mL}$, giving $d=-1/50$ and pH $12.301030\dots$. Neglecting dilution would give the wrong values even far from the equivalence point.

Exactly at $v=10.00\mathrm{mL}$, $d=0$ and $h=o=\sqrt{K_w}=10^{-7}$, giving pH $7$ in this model. At $9.999\mathrm{mL}$ and $10.001\mathrm{mL}$, the same smooth expression gives pH $5.300835\dots$ and $8.699121\dots$. The familiar excess-only formulas would predict zero hydronium or zero hydroxide at the equivalence point; retaining self-ionization of water removes that failure. A steep curve is still continuous.

The sensitivity is especially revealing. Differentiating $h-K_w/h=d$ giveswhen $c_A=c_B$. At this model's equivalence point, the derivative is about $1.086\times 10^4$ pH units per millilitre. This is a local derivative, not a linear prediction over a whole drop. Real endpoint accuracy also depends on dosing, mixing, measurement uncertainty, temperature, extra reacting chemical species, and nonideal thermodynamic activities.

A titration curve plots a measured or calculated property against added titrant volume or amount of substance. In an acid-base titration, plotting pH exposes gradual changes and a steep endpoint region. A potentiometric titration uses an electrode electric potential difference; a calibrated glass electrode and reference electrode provide operational pH. Finite additions bracket a transition rather than measuring a continuous curve. A chemical equilibrium fit can estimate the equivalence point; identifying the steepest sampled interval alone has a resolution set by the dose spacing and instrument response.