For the full prism point group, a threefold rotation eliminates any invariant basal component of a polar vector, while the horizontal mirror eliminates its axial component. Therefore the phase preserving all of is nonpolar, despite lacking inversion. A polar phase would have to break some of these symmetries.
The indicated six vertex directions comprise three basal directions and their horizontal-mirror partners. Crucially, this orbit does not contain the negatives of those vectors. Choose along the prism and toward one basal vertex. The cubic polynomial
is invariant under the prism's rotations and mirrors. Along a vertex direction with a nonzero basal component, it is proportional to , so odd scalar terms are symmetry-allowed. Along the prism axis the horizontal mirror instead sends , forcing an even free energy. Merely omitting inversion is insufficient to decide either polarity or the allowed invariants.
Under spatial inversion the electric polarization, a polar vector, changes from to . Neumann's principle requires an equilibrium property of a phase retaining inversion symmetry to be unchanged. Thus , forcing : a centrosymmetric phase cannot itself be ferroelectric. A transition can, of course, remove that symmetry.
For an inversion-symmetric parent phase the Landau theory free energy satisfies . Every polynomial term of odd total degree changes sign and must have zero coefficient. Restricting to one fixed direction gives an even scalar expansion in .
With and ,
For , the transformation in part c maps onto its Friedel pair with only a phase factor. Cyclic permutations give the same result when either other index vanishes. Friedel's law therefore survives for every such reflection, including any systematic absences.
For the reflection set . Then
Since the purely positional sums obey , the scalar resonant Friedel-pair intensity difference is
up to the same positive experimental scale factor. In particular,
Different positional phases can therefore produce a nonzero resonant intensity difference at , allowing the opposite structural handednesses to be distinguished. The claimed violation is generic, not an unconditional identity: the source supplies no numerical internal coordinates. For a concrete noncentrosymmetric counterexample, take and . Their orbit sums at are and , so the difference vanishes even if ; each generic chemical orbit is noncentrosymmetric, so this cancellation does not require inversion symmetry. Accidental cancellation, or , must be excluded before asserting a violation for a particular specimen.
Write , where the four-site orbit has structure factor
A cyclic permutation of fixes the first term and permutes the remaining three. Thus . Substituting exchanges the first and second exponentials and the third and fourth, with the common coefficient :
The two forms of this phase, and , agree for integer indices. Multiplication by a unit-modulus phase preserves intensity, irrespective of whether is real or complex. Since the phase is independent of and atomic species, it also multiplies the total structure factor of the crystal.
Use fractional coordinates and the structure factor convention
For real atomic scattering factors, , immediately proving Friedel's law. If an inversion centre is chosen as origin, each site at has an identical partner at , with the same possibly complex atomic scattering factor. Each pair contributes ; sites fixed by inversion modulo a lattice translation also have even phase factors at reciprocal-lattice vectors. Hence
even for scalar anomalous X-ray scattering in a centrosymmetric structure. This last equality is an equality of amplitudes, not generally complex conjugacy.
Away from an absorption edge, the scalar atomic scattering factor is the Fourier transform of an approximately spherical, real atomic electron density. Opposite points contribute conjugate phases, so their sum is real. In Thomson scattering the electronic response is also effectively in phase with the driving field in this nonabsorbing approximation. Near an absorption edge, resonantly driven electronic excitations introduce a phase lag and absorption. The atomic scattering factor becomes , with describing the absorptive component and its dispersive companion. The sign of the imaginary part depends on the time and scattering-phase conventions; here it is the source's convention. This discussion concerns scalar charge scattering, without magnetic or tensor resonant contributions.
The AC Josephson effect is . Since the imposed flux is held fixed when defining a small-signal inductance, differentiate c to obtain
On the stable small-current branch with , and the result reduces to the printed expression,
The stable small-signal inductance of a symmetric DC SQUID requires , stronger than near a half-integer flux quantum. If , the stable zero-current phase is and . Its inductance is positive:
For example, makes the printed signed formula negative when expanded about , but that phase is an energy maximum. Expanding about the stable corrects the sign. At ideal half-integer flux the critical current vanishes and the linear inductance formally diverges; a finite transport current cannot satisfy the small-current approximation there. Geometric inductance and other nonidealities then have to be retained instead of extending the simple formula through its pole.
Let and be gauge-invariant phase drops across the two identical junctions, oriented between the same terminal phases. Their currents obey the DC Josephson effect: and . For negligible loop self-inductance and no additional phase drops in the arms, fluxoid consistency fixes their difference modulo :
Define the mean terminal phase and . Then and the two parallel branch currents add:
Consequently the maximum magnitude of the current is , not a negative critical current when the cosine changes sign. The phase shifts by between such stable branches. Junction asymmetry or appreciable self-generated flux modifies the simplest interference pattern, so the stated idealization is required before treating as an externally prescribed flux.
Figure 1.
Two-junction superconducting interference and its stable inductive response
. Original circuit-level diagram of the stated ideal two-junction model, with a flux-dependent critical-current envelope and stable small-signal inductance. It does not reconstruct the missing source raster components. Details.
Cool a thick superconducting ring through its transition in a controlled external flux, remove or change the applied field while keeping the ring superconducting, and measure the persistent trapped flux using a calibrated pickup coil and sensitive magnetometer. Repeating while varying the cooling flux selects successive winding sectors. The measured flux is close to steps separated by when the kinetic-inductance correction is negligible. A SQUID-based flux readout can resolve that spacing; scanning local magnetic imaging offers another way to observe the trapped flux without identifying the ring current with an ordinary dissipative transport current.
The experiment tests the phase-winding/fluxoid relation in a. Self-inductance, London penetration depth and the size of the ring determine how nearly the measured geometric flux follows integer steps. A periodic response alone should not be used to infer an absolute trapped flux without calibration and the relevant inductive corrections.
TODO — source figure gap: the surviving ordinary-ring and two-junction-ring outlines and labels are readable, but page 9's figure form calls 52 absent raster objects, /R514 through /R565. The original archived parent has identical damage. An intact figure is needed to recover any missing image-specific details; those raster components have not been inferred or recreated. The observation method above answers the physical request without requiring the unavailable artwork; the TODO concerns verification of the input illustration rather than a missing part of the solution. The original circuit schematic used in c is an independent diagram of the stated model, not a claimed reconstruction of the unavailable artwork.
Start from a gauge-invariant Ginzburg-Landau theory of superconductivity gradient energy , with the coherent pair order parameter and its charge. Varying the free energy with respect to gives the current density displayed in the source. Write to obtain
Single-valuedness around a loop in superconducting material requires . Integrating the current relation therefore gives the exact fluxoid condition
For a thick ring choose the contour sufficiently deep in the material that the current term is negligible. Then flux itself is approximately quantized, with positive quantum
The sign of the pair charge is absorbed into the orientation of . In a thin ring with appreciable kinetic inductance, it is the fluxoid, not exactly the geometrical flux alone, that remains quantized. A state with nonzero phase-gradient current is a concrete counterexample to dropping the current integral without justification. The flux-only identity thus uses the ordinary thick-ring or negligible-kinetic-inductance limit in addition to phase single-valuedness.
Assume type-I confinement of both carriers, and first use an infinite square well as an explicit estimate. For thickness nm and each carrier mass , confinement measured from the corresponding well band edge is
Thus the first three infinite-well levels are approximately , and meV for each carrier. Interband envelope overlap favors matching quantum numbers when the electron and hole well profiles are the same. Ignoring exciton binding energy initially, their absorption thresholds are
The first two lie in the requested optical window. Two-dimensional subband joint densities of states produce step-like onsets, with excitonic peaks just below them, rather than only a bulk three-dimensional onset. Confinement strengthens electron–hole binding: the ideal strict-two-dimensional hydrogen ground binding is meV, while a finite-width well interpolates toward the bulk value near meV. The nm width is comparable to the bulk exciton radius, so neither limiting binding value is exact. A schematic based on the infinite-well estimate therefore has first exciton peaks around – eV and – eV, followed by their subband continua; the eV barrier absorption is another feature near the top of the requested window.
The barrier gap alone does not specify the finite confinement energies. Under type-I alignment it supplies only eV. It does not give their division or the barrier effective masses, and a larger gap by itself does not prove type-I alignment. Infinite-well levels are consequently estimates, not uniquely determined measured levels.
For a concrete conditional comparison, assigning equal eV electron and hole barriers and taking the same mass on both sides gives finite square well levels , and meV per carrier. These follow from for even levels and for odd levels, with , . The corresponding unbound-pair optical thresholds would be , and eV before exciton shifts. This example is deliberately conditional and demonstrates why band offsets must not be invented to make a unique finite square well spectrum. The requested schematic below states which approximation it uses.
Figure 1.
Conditional quantum-well levels and a low-temperature subband absorption sketch
. Original infinite-barrier estimate for a 5 nm well with equal carrier masses. The optical sketch uses two subband thresholds and illustrative exciton peaks; it is not a reconstruction of the source bulk spectrum or a unique prediction without band-offset data. Details.
The sharp solid curve is the K spectrum; the broadened dashed curve is the K spectrum. At low temperature, a strong discrete exciton transition appears just below the continuum edge, with weaker higher members converging toward the band gap. Heating broadens those resonances through scattering, reduces their spectral resolution, and shifts the band edge to lower photon energy. The lower-energy broad dashed maximum is therefore not evidence for a second unrelated low-temperature band gap.
Read approximate energies from the native figure: the main low-temperature peak is near eV and a weaker feature is near – eV, with the continuum edge around eV. A three-dimensional hydrogenic series then gives
For example, predicts about meV, consistent with those feature spacings. These are graphical estimates at roughly meV precision, not extra digits extracted from the line widths. The strong direct interband onset and subgap series support a direct-gap Wannier-Mott interpretation. The continuum absorption scale is of order m, corresponding to an optical absorption length of order a micrometre. At K, meV is already comparable with the inferred binding scale, explaining why a sharp Rydberg series is poorly resolved; at K, meV.
With , the reduced mass is . In the screened hydrogen model,
It follows that
A radius of several nanometres is consistent with an extended exciton in an ordinary semiconductor lattice. The relative permittivity inferred here is the effective dielectric screening parameter of that model; identifying the material chemically or determining a full dielectric spectrum is not possible from these data alone.
A Frenkel exciton is a tightly bound electron–hole excitation localized on approximately one molecular or ionic unit. Its radius is comparable to the lattice spacing, its exciton binding energy can be large, and transport is described through transfer of the local excitation between units. Molecular solids such as crystalline anthracene provide a natural example: the optical excitation is largely associated with an individual molecule, so a broad parabolic-band hydrogen model is not the most useful starting point.
A Wannier-Mott exciton extends over many unit cells. It is described approximately by a conduction electron and a valence hole with effective masses and a dielectric-screened Coulomb attraction. Its binding is usually smaller, and its levels resemble a hydrogenic series. gallium arsenide is a suitable example because its direct-gap band-edge carriers have light effective masses and substantial dielectric dielectric screening, supporting spatially extended excitons. Localization length and dielectric screening, rather than whether a material happens to be called a semiconductor, distinguish the two limiting pictures. Real materials can lie between the limits, so neither family is a universal sharp classification.
A magnetic field quantizes closed semiclassical orbits into Landau levels. Their passage through the Fermi energy modulates the density of states and scattering, producing Shubnikov-de Haas oscillations of resistivity. The fundamental frequency for a regular extremal orbit perpendicular to the field is
Thus two distinct fundamentals ordinarily identify two inequivalent extremal areas, rather than two arbitrary points or two spin directions automatically giving two different geometric areas.
The particle-hole equality of tetragonal extremal orbit areas is a special constraint of the exact half-filled nearest-neighbor band stated here. For , its regular closed endpoint sections are the electron contour at and the hole contour at described in b. Translation changes the sign of both cosines and maps one enclosed pocket onto the other. Their areas are equal. Direct integration gives
Consequently this bare model predicts
not two distinct regular fundamental frequencies. The intermediate contour is a separatrix with a divergent cyclotron period, not another ordinary smooth extremal pocket to insert into the Onsager formula. The larger occupied-area slice at is the complement of a hole pocket on the Brillouin torus; counting that complement as a second enclosed planar orbit would give a spurious ratio.
For comparison, an additional small- parabolic approximation would replace the exact surface by and suggest a rough belly-to-neck ratio . That approximation is uncontrolled at half filling and erases the actual topology; it cannot be asserted as an exact prediction of the supplied cosine band. The observation of genuinely different frequencies in a real material therefore needs further information, such as longer-range hopping, a departure from half filling, extra bands, symmetry breaking or a resolved spin-dependent effect. The universal area-ratio inference is valid, but a nonunit numerical ratio is not determined consistently by the complete stated band assumptions alone.[ref]
One orbital per primitive cell supplies two states per wave vector when spin is included. A monovalent metal therefore half-fills this band. Nearest-neighbor hopping on the bipartite rectangular lattice has for , fixing the half-filled Fermi energy at
For , the two Fermi surface obey
They are corrugated open sheets in an extended-zone description, with ranging from to . They are not a small circular pocket centered at the band bottom. The same maps one Fermi line onto its nested partner. A density-wave or Peierls-like modulation at that wave vector can open additional gaps at the Fermi energy. The unperturbed single-orbital band does not acquire those new gaps without a symmetry-breaking modulation or another coupling; ordinary lattice Bragg effects are already built into its dispersion.
For the three-dimensional tetragonal version set , , . The corresponding half-filled surface is
It is a corrugated periodic surface, not a sphere. At its regular closed contour is electron-like around , with ; at the closed contour is hole-like around , with the sum . The topology switches through the square-lattice separatrix at . Drawing one simple weakly warped cylindrical pocket across every section misses that feature of the half-filled cosine band.
Angle-resolved photoemission can directly map the dispersion and occupied Fermi surface. Angular quantum-oscillation measurements test its closed extremal cross sections and cyclotron masses; momentum-density probes such as positron annihilation or Compton scattering give a complementary bulk test. The different techniques constrain different features rather than merely providing interchangeable pictures.
Choose orthonormal localized orbitals . The on-site energy is , and the sign convention in the question defines . Bloch state diagonalizes this translationally invariant hopping problem. For real, inversion-symmetric nearest-neighbor amplitudes, and , so the exponential pairs yield
The first zone is the rectangle , , wider in because . Use , , and .
For positive and , the four corner energies and the requested path are
Along a path parametrized in reduced coordinates , , the full curve is simply . In particular the two appearances of and the two diagonal traversals must have consistent endpoint energies.[ref] A reversed hopping sign changes which point is the band minimum; the usual positive-hopping convention is stated explicitly here.
Figure 1.
Rectangular tight-binding zone, the specified band path and half-filled Fermi lines
. Original evaluation for tx equal to twice ty. Reduced coordinates identify the symmetry points; the physical reciprocal cell is wider along kx when a is less than b. The Fermi lines are open in the repeated-zone picture. Details.
In a low-carrier-density semiconductor use a thin, cold sample in a transmission spectrometer. Direct microwave or far-infrared radiation through it, commonly with propagation parallel to and electric field transverse to it. Sweep at fixed frequency and detect transmitted power. The active circular polarization shows an absorption peak, or transmission dip, near . Resolving it requires a long enough scattering time, .
A metal's large plasma frequency usually prevents that radiation from sampling its bulk directly. In surface cyclotron resonance in a metal, put approximately parallel to a clean metal surface and excite an rf electric field in the skin depth, transverse to . Electron orbits extend into the bulk and repeatedly return to that layer. Coherent energy absorption occurs when the rf phase repeats on a return, including harmonics . Measure cavity loss, reflected power, or surface impedance rather than attempting ordinary bulk transmission. The characteristic regime has cyclotron radius larger than the skin depth and sufficiently specular, long-lived orbits.
For the spherical parabolic band the metal harmonic fields are
They are evenly spaced in , with amplitudes and widths determined by surface geometry and scattering. A semiconductor generally gives the simple bulk fundamental, whereas the metal can show this harmonic series in a surface-loss signal. For an anisotropic real Fermi surface the measured mass is the appropriate cyclotron effective mass rather than necessarily every component of a transport effective-mass tensor. These classical resonance harmonics are distinct from the Landau-level quantum oscillations in c.
Figure 1. . Original schematic arrangements and illustrative field-scan signals. The semiconductor exhibits a bulk transmission dip; a metal is probed through skin-layer losses with harmonic resonance positions. Signal shapes are schematic rather than experimental data. Details.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact