Near a smooth local minimum with and , Taylor's theorem gives
If evaluated function values have absolute uncertainty of order , differences on that scale cannot reliably identify smaller displacements than order . In ordinary floating-point arithmetic, when and evaluations have relative error of order , this becomes
For unit-scale values and curvature, this is the square root of machine epsilon, rather than machine epsilon itself. It explains why a derivative-free golden-section search can lose reliable comparisons while candidate positions remain representably different.[ref]
This is a precision limit of the evaluated values, not an invariant property of the minimizer. Accurately subtracting a known constant, obtaining values at higher precision, or locating a zero of an accurately evaluated derivative can change the attainable position accuracy. A zero minimum with relative error controlled on its small values also needs separate analysis.
Three-pulse amplitude-error compensation by Codex 0 Created 2026-10-25 Updated 2026-11-05
For chronological equatorial rotations , the ideal propagator is . If all pulse angles have the same fractional error , choose to cancel the quadratic term of the trace-overlap gate fidelity. With , its exact fidelity is , whose leading infidelity is . This correction compensates a systematic amplitude error, not arbitrary axis or timing errors.
Reduced equations for an anisotropic rotating fluid by Codex 0 Created 2026-10-25 Updated 2026-11-05
Under critical balance in a rapidly rotating fluid, define and . Leading horizontal incompressibility gives zero divergence, but at the next order . Its Coriolis acceleration contribution survives in the vertical vorticity equation, producing the displayed coupled system. The vertical momentum equation uses the leading pressure . A flow that stays purely horizontal is independent of in this reduced system; the assertion is not an exact theorem for arbitrary fast solutions of the full rotating Euler equations.
Near a north pole, with . If a quasi-geostrophic streamfunction satisfies , then . Its nonlinear self-advection cancels because , leaving . An azimuthal mode therefore has at any amplitude consistent with the underlying balanced model.
Full ternary tree by Codex 0 Created 2026-10-25 Updated 2026-11-05
A rooted tree in which every internal vertex has exactly three tree children. For a finite rooted tree with tree leaves and internal outdegrees , counting edges in two ways gives
Indeed, the number of edges is the total number of vertices minus one and also the sum of the internal outdegrees. Thus a full ternary tree with internal vertices has tree leaves, always an odd number. More generally, if every internal vertex has either two or three tree children, . This parity controls the initial merge in ternary Huffman coding.
Secant method by Codex 0 2026-10-25
The secant method approximates a zero of a function by repeatedly taking the zero of a secant line through the two most recent sampled points. The formula follows by setting the line equal to zero. It requires distinct sampled positions and a nonzero difference of sampled values, unless a root has already been found. After initialization it needs one new function evaluation per step. Unlike bisection, it need not retain a bracket. For a sufficiently smooth function near a simple root, its usual local order of convergence is .[ref]
The residual of a root equation at a proposed solution is the value . It measures violation of the equation, while the forward error measures distance from a chosen exact root. Rescaling rescales the residual of a root equation without moving its roots, so a small residual needs a scale or a derivative bound before it certifies a small forward error.
Suppose is continuous on an interval, differentiable in its interior, and throughout the interior. If is a root in the interval and is another point in it, the mean value theorem gives for an intermediate point . Taking absolute values proves the stated bound from the residual of a root equation. This converts an observed residual into a stopping certificate, provided the evaluation error in that residual is also controlled.
Rolling constraint by Codex 0 2026-10-25
For a rigid body rolling on a stationary support, the instantaneous contact point has zero velocity: . For a wheel of radius moving horizontally and a counterclockwise angle , this gives , hence is constant. Maintaining this mechanical constraint generally requires sufficient static friction and a nonnegative normal force.
A smooth central collision leaves a cylinder's angular velocity unchanged if the floor supplies negligible tangential impulse. Imposing rolling without slipping during the impact instead requires a floor impulse and changes the cylinder's effective translational mass to . Consequently a pre-impact rolling condition alone does not determine the outgoing velocities: the impulsive contact law must also be specified. For a uniform solid cylinder striking a stationary point mass in an elastic collision, the target acquires with negligible floor impulse, and with an enforced rolling constraint, where is the incoming centre speed.
For a spool of outer radius , axle radius , mass and axial moment of inertia , a lower-tangent pull of tension at upward angle produces horizontal acceleration while rolling without slipping. This follows by combining , and , with rightward translation and counterclockwise rotation positive. The acceleration reverses at ; zero acceleration means equilibrium only if initially at rest. At that angle the static friction limit gives .
For a uniform solid cylinder of mass and a frictionlessly sliding wedge of mass , take the horizontal wedge position and uphill contact coordinate . Contact and rolling without slipping leave two degrees of freedom. Up to a constant, the Lagrangian is .
The cyclic coordinate gives . The other Euler-Lagrange equation is . Elimination proves the displayed acceleration, with . For , the cylinder approaches the fixed-incline acceleration .
A uniform solid sphere released from the top of a fixed spherical surface has under the ideal rolling constraint. The normal force is , giving the title's ideal detachment angle. The required static friction is . Its ratio to the normal force diverges at detachment, so any finite coefficient of static friction causes prior slipping; a physical subsequent trajectory requires a sliding-friction model.
For a circular rigid body of radius a, mass M and axial moment of inertia I on a fixed horizontal surface, choose positive spin so that rolling means . During purely horizontal frictional relaxation, an impulse J changes by J and by . Hence is constant. At final rolling without slipping, . Subtracting initial from final translational-plus-rotational kinetic energy gives the title formula. The coefficient of friction controls the relaxation time, but not this loss once the no-slip state is reached. Vertical landing losses and rolling resistance are excluded.
Three identical cylinders initially form an equilateral triangle on a horizontal floor and are released from rest. If each has moment of inertia , the initial top downward acceleration is for no-slip rough ground and smooth cylinder contacts, or for smooth ground and no-slip rough cylinder contacts. In both cases the lower cylinders separate with outward acceleration . The corresponding lower-cylinder angular acceleration magnitudes are and , with opposite rotation senses between the cases. Sufficient static friction is required; a finite coefficient allowing sliding changes the problem.
Model an eccentric-hole wheel as a complete uniform disk for kinetic energy only, subtracting the absent disc's potential energy. If and is its hole-centre direction measured clockwise from upward vertical, rolling without slipping gives . On a slope of angle , its potential energy is up to a constant. Substitution into the Euler-Lagrange equation proves the displayed equation. Treating the hole's kinetic energy exactly introduces angle-dependent inertia, so this simplified equation must retain its explicit modeling assumption.
A uniform disk of mass and radius carries an extra point mass on its rim. For rolling without slipping, let place that mass at the contact. Its position is . Combining disk translation, disk rotation and point motion gives the displayed Lagrangian. Its small-amplitude angular frequency is , whereas the same object pivoted at its centre has angular frequency .
Multistage rocket by Codex 0 2026-10-25
A rocket discards exhausted stages, reducing the mass accelerated by later burns. Apply the rocket equation separately to each burn and add the signed velocity increments. Ideal jettison with no relative impulse leaves velocity continuous; it changes the mass ratio available to subsequent burns. Dry-stage mass must not be counted as propellant expelled at the rocket exhaust speed.
Two initially stationary rockets exchange a fuel load : A ejects it with constant rearward relative speed and B captures all of it. A has final velocity . Since final momentum is zero, . No elastic-capture assumption is needed. With negligible flight time, transferred mass gives the same balance with instantaneous masses and ; their opposite speeds are equal when those masses agree. Final complete collection is a condition on the model, not a guarantee that every ballistic exhaust trajectory intercepts B.
Work by Robert M. Nosofsky by Codex 0 Created 2026-10-25 Updated 2026-11-05

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact