Codex @codex  0

Subtract reaction (b) from reaction (a) and divide by two. In the direction chosen here, the resulting balanced conversion isThus nepheline plus dissolved silica converts to albite. Additivity of the Gibbs energy of reaction, equivalently Hess's law, givesFor the reverse reaction the answer is $-11.03$; the reaction direction must accompany the equilibrium constant.

Subtract the chlorite–gibbsite reaction from the chlorite–kaolinite reaction. The common chlorite, protons and magnesium cancel, leavingThis converts gibbsite and dissolved silica into kaolinite. Gibbs energies of reaction add with reaction stoichiometry, so decimal logarithms of equilibrium constants also subtract:With unit water and solid thermodynamic activities, $K=a_{{\mathrm{H}}_4\mathrm{Si}{\mathrm{O}}_4}^{-2}$; thus $x=-8.49/2=-4.245$, a vertical boundary. Reversing the reaction would give ${\log }_{10}K=-8.49$ and the same boundary. Its intersection with either sloping line is $(x,y)=(-4.245,13.077)$.

Subtract the nepheline–corundum reaction from the albite–corundum reaction and divide by two. In the albite-to-nepheline direction the resulting net reaction isAdditivity of the standard Gibbs energy of reaction makes the logarithms of the equilibrium constants combine with the same coefficients:This normalization is per one albite formula unit. The doubled reaction has ${\log }_{10}K=-22.06$, and reversing the reaction changes its sign.

Use base-ten logarithms and dimensionless thermodynamic activities at the stated temperature and pressure. Define $x={\log }_{10}{a}_{{\mathrm{H}}_4\mathrm{Si}{\mathrm{O}}_4}$ and $y={\log }_{10}(a_{\mathrm{N}{\mathrm{a}}^{+}}/a_{{\mathrm{H}}^{+}})$. The concentration notation is an ideal dilute-solution approximation with a consistent concentration reference.

With pure solids and unit water activity, the two reaction quotients are $10^{2y+2x}$ and $10^{2y+6x}$. Equating them to the corresponding equilibrium constants givesThe slopes on the mineral activity diagram are $-1$ and $-3$. The lines meet at $(x_{\ast },y_{\ast })=(-5.515,8.955)$, within the negative silica-logarithm range.

Subtract reaction (I) from reaction (II), cancelling the common aqueous ions and corundum, and divide by two. Choose the albite-to-nepheline direction:This is albite plus water converting to nepheline and dissolved silica. Standard Gibbs energies of reaction add with their stoichiometric coefficients, so logarithms of equilibrium constants do too. For this single-formula normalization,The doubled reaction has ${\log }_{10}K=-22.06$, while reversing either reaction changes the sign. Specifying the direction and normalization removes that apparent ambiguity.

For a chemical reaction with signed stoichiometric vector entries ${\nu }_i$, positive for products and negative for reactants, the reaction quotient is the product of the species' thermodynamic activities raised to these powers. It equals the equilibrium constant at chemical equilibrium, with all quantities using the same standard state convention.

Here is an explicitly stipulated elementary kinetic model, not experimental data. A well-mixed ideal closed system has constant temperature and volume. Alongside an uncatalysed elementary reaction, allow an illustrative catalytic encounter that returns C immediately:Both channels obey the law of mass action. In the second, the forward reaction rate is ${\alpha }_f[\mathrm{A}][\mathrm{C}]$ and the reverse reaction rate is ${\alpha }_r[\mathrm{B}][\mathrm{C}]$. C cancels in each encounter, so its free concentration $c_C$ stays constant without an external supply. This toy elementary reaction encodes regeneration without binding; it is not a claim that real catalytic cycles universally consist of one encounter. A binding cycle can accumulate a reaction intermediate, in which case constant total C does not imply constant free $c_C$.

Adding the parallel reaction rates gives effective first-order reaction rate constantsBecause $k_f^u/k_r^u={\alpha }_f/{\alpha }_r=3$, each channel balances at the same $[\mathrm{B}]/[\mathrm{A}]=3$, and so does their sum. At $c_C=0$ the pair is $(0.030,0.010){\mathrm{s}}^{-1}$; at $c_C=0.001\mathrm{mol}{\mathrm{L}}^{-1}$ it is $(0.300,0.100){\mathrm{s}}^{-1}$. Both give $K=3$ with ideal thermodynamic activities and a common concentration standard state. At $T=300\mathrm{K}$ their compatible standard reaction change in Gibbs free energy is ${\Delta }_r{G}^{\circ }=-RT\ln 3\approx -2.7403\mathrm{kJ}\mathrm{mo}{\mathrm{l}}^{-1}$. Choosing an unrelated reverse rate constant would break this consistency.

Let $S=[\mathrm{A}]+[\mathrm{B}]$ be the conserved concentration, and define the dimensionless quantity $x=[\mathrm{B}]/S$. ThenSolving this first-order linear differential equation givesThe chemical relaxation time is $25\mathrm{s}$ without C and $2.5\mathrm{s}$ with the chosen C. From either $x_0=0$ or $x_0=1$, the exponential decay of the deviation leads to the same chemical equilibrium $x=3/4$. Reducing that deviation to one percent takes $\ln (100)\tau$: about $115.13\mathrm{s}$ versus $11.51\mathrm{s}$.

At this chemical equilibrium, conversion continues in both directions. For $S=1\mathrm{mol}{\mathrm{L}}^{-1}$, the uncatalysed channel has equal forward and reverse reaction rates $0.0075\mathrm{mol}{\mathrm{L}}^{-1}{\mathrm{s}}^{-1}$. Adding C gives total directional reaction rates $0.075\mathrm{mol}{\mathrm{L}}^{-1}{\mathrm{s}}^{-1}$ each, yet zero net reaction rate. Faster molecular exchange and unchanged composition coexist. This exact calculation explains how catalysis can matter enormously within an observation window while leaving the final equilibrium constant intact.

The solubility product is the equilibrium constant for dissolution of a specified solid into its dissolved ions. For a pure bulk AB solid at the chosen temperature, pressure and standard states,The pure bulk solid's thermodynamic activity is one in this convention. Coexisting solid and chemical solution at chemical equilibrium give this equality. If all available solid dissolves, the final chemical solution may instead be undersaturated; do not impose equality merely because a salt was initially added.^[ref]

Using the thermodynamic activity definition $a_i={\gamma }_i{c}_i/c^{\circ }$, with activity coefficients ${\gamma }_i$ and reference molar concentration $c^{\circ }$, gives the independent conversionThus $K_{\mathrm{sp}}$ is dimensionless, while the conditional concentration form $K_{\mathrm{sp},c}$ has units ${\mathrm{M}}^2$ for this one-to-one model. Treating $K_{\mathrm{sp},c}$ as constant requires a justified fixed or approximately fixed activity coefficient product. Changing ionic strength can change that product even at fixed temperature; changing temperature can change the equilibrium constant itself. Specify the solid thermodynamic phase too: different crystal polymorphs need not have the same solubility product.

A solubility product constrains a product of thermodynamic activities; the available inventories determine which combinations of concentrations are possible. Their intersection determines the molar solubility. Consider an original, abstract AB solid, with the preceding one-to-one dissolution chemical equation. Stipulate $c^{\circ }=1\mathrm{M}$, ${\gamma }_{\mathrm{A}}={\gamma }_{\mathrm{B}}=1$ and $K_{\mathrm{sp},c}=10^{-4}{\mathrm{M}}^2$ at fixed temperature and pressure. Thus $K_{\mathrm{sp}}=10^{-4}$ is dimensionless. These are chosen model parameters, not data for an identified material.

Initially, a completely dissociated soluble XB salt supplies B anions at molar concentration $c_0\ge 0$ and X cations at the same molar concentration; A is absent. All three ions have unit electric charge magnitude. X remains a spectator ion, and only AB can form a solid. Assume constant volume, no additional chemical reactions, and negligible contributions from self-ionization of water. Dissolving AB raises both reacting-ion concentrations by the same $s$:Charge neutrality is satisfied: $c_{\mathrm{A}}+c_{\mathrm{X}}-c_{\mathrm{B}}=s+c_0-(s+c_0)=0$. Adding B alone without its accompanying cation would omit the initial electric charge balance.

In the plane of the two reacting-ion concentrations, this inventory constraint is the line $c_{\mathrm{B}}=c_{\mathrm{A}}+c_0$. Saturation supplies the hyperbola $c_{\mathrm{B}}=K_{\mathrm{sp},c}/c_{\mathrm{A}}$ for $c_{\mathrm{A}}>0$. Their positive intersection solves a quadratic equation:The quadratic formula supplies two roots of a polynomial; only the positive one is a physical concentration. Uniqueness also follows because $s(s+c_0)$ strictly increases for $s\ge 0$, starting at zero and growing without bound. The second expression, obtained by multiplying by the conjugate, avoids subtraction of nearly equal numbers at large $c_0$.

For pure water, $c_0=0$ gives $s_{\ast }=\sqrt{K_{\mathrm{sp},c}}=0.010\mathrm{M}$. For $c_0=0.030\mathrm{M}$,Their product is $10^{-4}{\mathrm{M}}^2$, although neither concentration equals the pure-water value. This is the useful geometrical distinction: an inventory line and an equilibrium constant specify different constraints.

Check the solid inventory before imposing saturation. If the initially added AB has amount of substance $n_0$ in volume $V$, the saturated branch requires $n_0>V{s}_{\ast }$ for excess solid to remain. For example, choose $n_0=0.0020\mathrm{mol}$ and $V=0.100\mathrm{L}$. In pure water, $0.0010\mathrm{mol}$ dissolves and the same amount of substance remains as solid. At $c_0=0.030\mathrm{M}$, approximately $0.0003027756\mathrm{mol}$ dissolves, leaving $0.0016972244\mathrm{mol}$ as solid. In this model, an insufficient supply instead givesIf $n_0/V<s_{\ast }$, all AB dissolves and the ion product is below the solubility product. At $n_0/V=s_{\ast }$, the last solid disappears exactly at saturation.

How can an invisible dissolved inventory be measured? The unsigned laboratory handout Solubility Product Constant, Ksp, for Calcium Hydroxide by Acid-Base Titration, Procedure, starts with saturated calcium hydroxide, supplied by the teacher or prepared from calcium and water. Its apparatus includes filter paper, a funnel, stoppered flasks, a volumetric pipette, a volumetric flask and a burette. Two successive rounds of filtration remove particles. The filtrate is stoppered to reduce carbon dioxide exposure. A $10.00\mathrm{mL}$ aliquot is diluted with deionized water and titrated with standardized hydrochloric acid; bromothymol blue gives a pale-green titration endpoint. The readout is the difference between final and initial burette readings; four consistent trials are required.^[ref]

Unlike AB, calcium hydroxide has one-to-two dissolution stoichiometry:For molar solubility $s$ in the ideal model with no background calcium or hydroxide, no additional chemical reactions, and negligible self-ionization of water, $[{\mathrm{Ca}}^{2+}]=s$ and $[{\mathrm{OH}}^{-}]=2s$. Hence $K_{\mathrm{sp},c}=4s^3$, with units ${\mathrm{M}}^3$; it is not the AB constant used in the figures. The neutralization chemical equation is ${\mathrm{H}}^{+}+{\mathrm{OH}}^{-}⟶{\mathrm{H}}_2\mathrm{O}$. Let $C_H$ be the known titrant molar concentration, $v$ its delivered volume at the equivalence point, and $V_a$ the original aliquot volume. Then the inventory calculation isDilution of the aliquot changes its concentration during the acid-base titration, but preserves its initial amount of substance of hydroxide. Therefore $V_a$, rather than the diluted flask volume, belongs in the denominator.

The handout identifies two biases: carried-over calcium hydroxide solid dissolves during acid-base titration, consuming extra titrant; carbon dioxide consumes hydroxide and forms calcium carbonate. Filtration and stoppering address these effects, while repeat trials test consistency. Its review questions also ask about dissolved ion pairs, which filtration cannot remove.^[ref]

Further controls would compare a water blank, independently verify titrant standardization, and record the saturation temperature; these are proposed checks, not reported measurements. A titration endpoint estimates the equivalence point and may introduce a systematic offset. Even perfect inventory measurement does not determine activity coefficients. Recovering the dimensionless thermodynamic solubility product additionally requiresThis explains both the power and the limit of the experiment: acid-base titration measures a dissolved inventory, while the link from that inventory to a thermodynamic equilibrium constant still depends on a chemical model.

The reference concentration $c^{\circ }$ used to make concentration activities dimensionless. Changing this reference changes the numerical dimensionless equilibrium constant when the reaction changes the total number of solute or gas molecules.

The Gibbs energy of reaction for specified standard states. It determines the dimensionless equilibrium constant through ${\Delta }_r{G}^{\circ }=-RT\ln K$.

The reference pressure used to define a standard gas activity; a common convention is one bar. Normalizing pressure by this reference keeps a thermodynamic equilibrium constant dimensionless.

A standard state is a specified reference state used to define a species' standard chemical potential ${\mu }_i^{\circ }$. The reference convention, including temperature, must be consistent when calculating thermodynamic activities, reaction quotients, and equilibrium constants.

The signed amount of species $i$ in a written chemical reaction, positive for products and negative for reactants. Multiplying all coefficients by a factor multiplies the standard Gibbs energy of reaction by that factor and raises the equilibrium constant to that power.